Thingiverse
PIEZO-ABL E3D Titan Aero Bracket for Anet A8 by noobydp
by Thingiverse
Last crawled date: 4 years, 9 months ago
NOTE: I have printed but havent used this part yet. Waiting for the piezo to arrive.
A mashed together Titan Aero mount that supports a 35mm piezo sensor (from Tinkerman).
I used the backplate from Sadegroo: https://www.thingiverse.com/thing:3423607
One linear block screw is inaccessible so I closed the hole.
I also removed the fan bracket on the original mount because I use 'The Snail' by redangel1984: http://www.thingiverse.com/thing:3327931
Print with supports in the orientation in the screenshot, otherwise supports are nearly impossible to remove.
A mashed together Titan Aero mount that supports a 35mm piezo sensor (from Tinkerman).
I used the backplate from Sadegroo: https://www.thingiverse.com/thing:3423607
One linear block screw is inaccessible so I closed the hole.
I also removed the fan bracket on the original mount because I use 'The Snail' by redangel1984: http://www.thingiverse.com/thing:3327931
Print with supports in the orientation in the screenshot, otherwise supports are nearly impossible to remove.