Thingiverse
![Pi1541 with Rotary Controller (Commodore Style) by BleuLlama](/previews/10253799.jpg)
Pi1541 with Rotary Controller (Commodore Style) by BleuLlama
by Thingiverse
Last crawled date: 2 years, 11 months ago
I love rwicksall's design for a commodore-styled external enclosure for the Pi1541 drive emulator, but my implementation of it uses a rotary encoder instead of the buttons. So I've started from their design, but heavily modified it in tinkercad.
I "filled in" all of the holes on the front panel, then created a new hole for the OLED display, and a hole with registration hole for mounting the rotary encoder. Since I only wanted one activity LED, I moved that to have 1541-styled placement in the bottom left.
The electronics will be hot-glued in place on mine, with hand-wiring, since they are remote off of my Pi-Zero-1541, so the placement is not confirmed to work if you use a perfboard. The rest of the enclosure is used as-is from the original design.
I also added some additional registration pins to help line it up and keep it lined up with the lower portion of the enclosure.
I printed mine face-down on my MakerBot, with raft and no support, but that's just me. You may want to print it differently... I'm not sure it matters.
I "filled in" all of the holes on the front panel, then created a new hole for the OLED display, and a hole with registration hole for mounting the rotary encoder. Since I only wanted one activity LED, I moved that to have 1541-styled placement in the bottom left.
The electronics will be hot-glued in place on mine, with hand-wiring, since they are remote off of my Pi-Zero-1541, so the placement is not confirmed to work if you use a perfboard. The rest of the enclosure is used as-is from the original design.
I also added some additional registration pins to help line it up and keep it lined up with the lower portion of the enclosure.
I printed mine face-down on my MakerBot, with raft and no support, but that's just me. You may want to print it differently... I'm not sure it matters.
Similar models
thingiverse
free
![piZero pi1541 Enclosure by evanevery](/t/8346671.jpg)
piZero pi1541 Enclosure by evanevery
... held together with a single #4 x 1-1/4 screw. optionally, you can also use 4 short #3 screws up from the underside of the base.
thingiverse
free
![Commodore 1541 Ultimate Enclosure by BPopilek](/t/8921964.jpg)
Commodore 1541 Ultimate Enclosure by BPopilek
...re any changes that need to be made, or suggestions. the source files are included in case you want to modify it yourself. enjoy!
thingiverse
free
![Pi1541 Case Commodore Style by rwicksall](/t/10237311.jpg)
Pi1541 Case Commodore Style by rwicksall
...m the led otherwise it was crazy bright.
holes for pi were tapped with 2.5mm tap. holes for usb socket were tapped with 3mm tap.
thingiverse
free
![Artillery Sidewinder X1 - BTT TFT 3.5 v3.0 Mount Another Base](/t/4919641.jpg)
Artillery Sidewinder X1 - BTT TFT 3.5 v3.0 Mount Another Base
...mount holes are 84x49 mm. and i removed the sd card holder. i'm using it with oceany's "tft35-frontcover.stl" .
thingiverse
free
![Commodore 64 Pi 1541 Case by rustlemills](/t/8159389.jpg)
Commodore 64 Pi 1541 Case by rustlemills
...4-128-vic20-with-oled-buzzer-status-leds-/254365366581
raspberry pi:
https://www.raspberrypi.org/products/raspberry-pi-3-model-b/
thingiverse
free
![Commodore 64 1541 transit card by ogg1e](/t/8297653.jpg)
Commodore 64 1541 transit card by ogg1e
...uld be a lot more durable as well.
i used the sizes from ray carlson:http://personalpages.tds.net/~rcarlsen/cbm/1571/transit.txt
thingiverse
free
![Space Marine Helmet - Wearable (remix) by Erdrick](/t/8595128.jpg)
Space Marine Helmet - Wearable (remix) by Erdrick
...it would fit on my printer, additionally while slicing i continued with richwp's "registration hole" design pattern
thingiverse
free
![Plug for Garden Rotary Line Hole by simontelescopium](/t/8535401.jpg)
Plug for Garden Rotary Line Hole by simontelescopium
...e problems.
fits a hole for a 38mm diameter rotary line pole.
i've included the sketch-up file should anyone want to update.
thingiverse
free
![6mm shaft (for 12mm rotary encoder) knob adapter by Namrock](/t/8993692.jpg)
6mm shaft (for 12mm rotary encoder) knob adapter by Namrock
...
the adapter is an extremely tight fit on the shaft right off of the machine - i had to do a bit of filing to make it fit snugly.
thingiverse
free
![pi1541 Box by evanevery](/t/8346666.jpg)
pi1541 Box by evanevery
... enclosures so this one uses #4 screws to hold it together. #4 x 1" inch will work but #4 x 1-1/4 or 1-1/2 would be better!
Bleullama
thingiverse
free
![Filament Winding Handle by BleuLlama](/t/8339932.jpg)
Filament Winding Handle by BleuLlama
...s seemed like the best, simplest solution to the problem.
i've provided two handles you can use, a round one and an oval one.
thingiverse
free
![Crow T Robot - Shoulder Clip by BleuLlama](/t/8351295.jpg)
Crow T Robot - Shoulder Clip by BleuLlama
...wire spade thingy, i made these to clip onto the shoulder pegs.
i printed them with makerbot toughpla, and they clip on nicely.
thingiverse
free
![Technic Steering Arm with Tow ball socket by BleuLlama](/t/9233658.jpg)
Technic Steering Arm with Tow ball socket by BleuLlama
...39;s ball joint part.
be sure to print it in some sort of tough material so it can take the stress of the ball joint snapping in.
thingiverse
free
![Sony TGV3 replacement control panel cover by BleuLlama](/t/9238244.jpg)
Sony TGV3 replacement control panel cover by BleuLlama
...facts, and get the cleanest print possible. ymmv.
it's marked as a work in progress until i can confirm it fits perfectly. :)
thingiverse
free
![Tom Servo Alternate Hoverskirt by BleuLlama](/t/8349204.jpg)
Tom Servo Alternate Hoverskirt by BleuLlama
... used for actual tom, rather than trying to stay true to packratt2k's original model.
i used ca glue to hold it all together.
thingiverse
free
![Crow T Robot - Arm and Neck Poppets by BleuLlama](/t/8343762.jpg)
Crow T Robot - Arm and Neck Poppets by BleuLlama
... has an outside diameter just over 1".
for each crow, print two short items for the arms, and one long one for the neck. :d
thingiverse
free
![Tandy 102 Option Rom Cover Panel by BleuLlama](/t/10253655.jpg)
Tandy 102 Option Rom Cover Panel by BleuLlama
...owards the front of the machine, where the slot is to open it.)
i tried to make it so no support material or raft will be needed.
thingiverse
free
![AMAX Drive In Amiga 2000 by BleuLlama](/t/8343293.jpg)
AMAX Drive In Amiga 2000 by BleuLlama
...ige color, or a more exciting, more mac'cy platinum color.
the faceplate design was inspired by the mac iici/iicx, and se/30.
thingiverse
free
![Floppy Drive Bracket for Amiga 2000 5.25" Drive Bay by BleuLlama](/t/8348426.jpg)
Floppy Drive Bracket for Amiga 2000 5.25" Drive Bay by BleuLlama
...n for it.
this also works with other floppy drives, as seen in the pic. some may need to have the outer metal shielding removed.
Pi1541
thingiverse
free
![Pi1541 case by milika](/t/8310114.jpg)
Pi1541 case by milika
... a basic case i made for my implementation of pi1541 (https://cbm-pi1541.firebaseapp.com/)
i added 2 mm walls and it come out ok.
thingiverse
free
![Pi1541 Transparent case for the Pi1541 HAT by @edu_arana by arananet](/t/8294239.jpg)
Pi1541 Transparent case for the Pi1541 HAT by @edu_arana by arananet
...e: https://www.arananet.net/pedidos/product/pi1541-convert-your-raspberry-pi-3-into-a-full-compatible-1541-c-drive/
regards,
edu.
thingiverse
free
![Pi1541 Case by blockmind](/t/8143399.jpg)
Pi1541 Case by blockmind
.../2018/07/pi1541io-revision-3/
it can be ordered by here:https://www.pcbway.com/project/shareproject/pi1541_io_adapter__rev_3.html
thingiverse
free
![Pi1541 Rasberry Pie Case by mamejay](/t/8168955.jpg)
Pi1541 Rasberry Pie Case by mamejay
...hingiverse
pi1541 raspberry pi case to suit the pi1541 from www.melbourneconsolerepros.com
user x 4 m3*16mm self tapping screws.
thingiverse
free
![Pi1541 zero (case) remix by Chorozonjp](/t/8197747.jpg)
Pi1541 zero (case) remix by Chorozonjp
... chorozonjp
thingiverse
remix of pi1541 zero case designed by porywacz_zwlok - each part as a separate file for easier printing.
thingiverse
free
![Pi1541 Case for Pihead on RPI by lutzbellmann](/t/5094335.jpg)
Pi1541 Case for Pihead on RPI by lutzbellmann
...he pi1541 on a raspberrypi 3 inkl. display.
assembly is done with 3 smallish screws. slots for all ports available incl. sd card.
thingiverse
free
![pi1541 Box by evanevery](/t/8346666.jpg)
pi1541 Box by evanevery
... enclosures so this one uses #4 screws to hold it together. #4 x 1" inch will work but #4 x 1-1/4 or 1-1/2 would be better!
thingiverse
free
![piZero pi1541 Enclosure by evanevery](/t/8346671.jpg)
piZero pi1541 Enclosure by evanevery
... held together with a single #4 x 1-1/4 screw. optionally, you can also use 4 short #3 screws up from the underside of the base.
thingiverse
free
![Pi1541 Case + Displayholder for Quimat 3,5" Display by Tormentor22](/t/8293046.jpg)
Pi1541 Case + Displayholder for Quimat 3,5" Display by Tormentor22
...mp;psc=1) which i use to navigate through my images. the covers snap in. i suggest to print the case cover with a little support.
thingiverse
free
![Pi1541 Case Commodore Style by rwicksall](/t/10237311.jpg)
Pi1541 Case Commodore Style by rwicksall
...m the led otherwise it was crazy bright.
holes for pi were tapped with 2.5mm tap. holes for usb socket were tapped with 3mm tap.
Commodore
thingiverse
free
![Commodore C64](/t/4935362.jpg)
Commodore C64
...commodore c64
thingiverse
commodore c64
thingiverse
free
![Commodore keychain by Dr_Freeman](/t/8710746.jpg)
Commodore keychain by Dr_Freeman
...commodore keychain by dr_freeman
thingiverse
easy keychain to assemble commodore logo.
thingiverse
free
![Logo Commodore 64 by syntonia](/t/8691627.jpg)
Logo Commodore 64 by syntonia
...logo commodore 64 by syntonia
thingiverse
logo commodore 64
thingiverse
free
![commodore 64](/t/4906746.jpg)
commodore 64
...commodore 64
thingiverse
c64 case for raspberry pi 3b
thingiverse
free
![Commodore Coin by LCD](/t/8918484.jpg)
Commodore Coin by LCD
...commodore coin by lcd
thingiverse
yes, really a coin with commodore logo. size of 1 € coin. works as jeton for shoping troley.
thingiverse
free
![commodore 64 game by Stijgerart](/t/8974445.jpg)
commodore 64 game by Stijgerart
...commodore 64 game by stijgerart
thingiverse
the old commodore 64 game i love so much
thingiverse
free
![Commodore 64 IRQHack Box by gmemik](/t/8534037.jpg)
Commodore 64 IRQHack Box by gmemik
...commodore 64 irqhack box by gmemik
thingiverse
commodore 64 irqhack box
thingiverse
free
![Commodore 1702 Control Cover by havunome](/t/9675006.jpg)
Commodore 1702 Control Cover by havunome
...commodore 1702 control cover by havunome
thingiverse
commodore 1702 control cover
thingiverse
free
![Commodore 1802 Control Cover by havunome](/t/9675080.jpg)
Commodore 1802 Control Cover by havunome
...commodore 1802 control cover by havunome
thingiverse
commodore 1802 control cover
thingiverse
free
![Commodore SX64 Modulschachtklappe by oobdoo](/t/8656454.jpg)
Commodore SX64 Modulschachtklappe by oobdoo
...ommodore sx64 modulschachtklappe by oobdoo
thingiverse
neue klappen für einen commodore sx64, wann man die alten verbummelt hat.
Rotary
thingiverse
free
![Rotary dial by nukaboy](/t/8375439.jpg)
Rotary dial by nukaboy
...rotary dial by nukaboy
thingiverse
a simple rotary dial for mounting on a rotary switch
thingiverse
free
![rotary / kreisel by Syzguru11](/t/8298420.jpg)
rotary / kreisel by Syzguru11
...rotary / kreisel by syzguru11
thingiverse
rotary / kreisel
thingiverse
free
![rotary scruntchy holder](/t/4678849.jpg)
rotary scruntchy holder
...rotary scruntchy holder
thingiverse
rotary scruntchy holder
thingiverse
free
![Rotary Viçosa by marciommr](/t/8803635.jpg)
Rotary Viçosa by marciommr
...rotary viçosa by marciommr
thingiverse
rotary club viçosa
thingiverse
free
![Rotary-Clamp by VolkerB](/t/8193250.jpg)
Rotary-Clamp by VolkerB
...ngiverse
this clamp fits the object to the rotary-wheel.
tested with:
morn-laser rotary
this part is for non-comercial use only!
thingiverse
free
![Rotary lenses by JayJo](/t/8987843.jpg)
Rotary lenses by JayJo
...rotary lenses by jayjo
thingiverse
focusing pair of reflecting lenses, rotary formation, caged, in line
thingiverse
free
![ROTARY TABLE by Arduinoklg](/t/5080298.jpg)
ROTARY TABLE by Arduinoklg
...rotating table
this video i show you how make rotary table this 3d model box and motor from microwavehttps://youtu.be/lohjewb6dqc
thingiverse
free
![Rotary shelf](/t/4974052.jpg)
Rotary shelf
...rotary shelf
thingiverse
keep general screws. anything...
thingiverse
free
![Knob for rotary encoder / potmeter](/t/4978874.jpg)
Knob for rotary encoder / potmeter
...ry encoder / potmeter
thingiverse
knob for a rotary encoder/potmeter. fits the standard size potentiometer/rotary encoder (6mm).
thingiverse
free
![Rotary Knobs by scarou](/t/8911407.jpg)
Rotary Knobs by scarou
...rotary knobs by scarou
thingiverse
rotary knobs for 6 mm shaft with flat or without.
cursor - 10 bumps.
Style
thingiverse
free
![bracelet styles by aramisi](/t/8569526.jpg)
bracelet styles by aramisi
...bracelet styles by aramisi
thingiverse
bracelet styles
thingiverse
free
![Style Builiding by nagato](/t/8900634.jpg)
Style Builiding by nagato
...style builiding by nagato
thingiverse
style builiding
thingiverse
free
![House Style by nagato](/t/8933771.jpg)
House Style by nagato
...house style by nagato
thingiverse
house style
thingiverse
free
![Styling CORRIDOR by NANCHI](/t/9009815.jpg)
Styling CORRIDOR by NANCHI
...styling corridor by nanchi
thingiverse
styling corridor
thingiverse
free
![Sword Samurai Style](/t/4655396.jpg)
Sword Samurai Style
...sword samurai style
thingiverse
samurai style sword.
thingiverse
free
![L89 Style Hood](/t/4901303.jpg)
L89 Style Hood
...l89 style hood
thingiverse
1/25th scale l89 style hood
thingiverse
free
![Fillamentum swatch style](/t/4904046.jpg)
Fillamentum swatch style
...fillamentum swatch style
thingiverse
fillamentum swatch style: https://fillamentum.com/collections/samples_swatches
thingiverse
free
![graffiti style by atze_peng](/t/8300203.jpg)
graffiti style by atze_peng
...graffiti style by atze_peng
thingiverse
hip hop dont stop!
3d graffiti style _ mebes
thingiverse
free
![DECORATION STYLE CODING](/t/4921489.jpg)
DECORATION STYLE CODING
...decoration style coding
thingiverse
a decoration in the style of coding > _
(no bicolor file)
blog : bit.ly/leofactory
thingiverse
free
![MWO Style Thorn](/t/4770287.jpg)
MWO Style Thorn
...mwo style thorn
thingiverse
a work in progress on the thorn in an mwo style. version 3 coming soon!
Controller
thingiverse
free
![Megapoints Controllers - Servo Controller by SoBaldrick](/t/8577701.jpg)
Megapoints Controllers - Servo Controller by SoBaldrick
...megapoints controllers - servo controller by sobaldrick
thingiverse
megapoints controllers - servo controller base
thingiverse
free
![controller by tahmasnx](/t/8775161.jpg)
controller by tahmasnx
...controller by tahmasnx
thingiverse
controller fusion 360
thingiverse
free
![Control panel](/t/4715315.jpg)
Control panel
...control panel
thingiverse
control panel for scuba regulator/bank system
thingiverse
free
![ph controller](/t/4872708.jpg)
ph controller
...ph controller
thingiverse
pi zero based reef-pi ph controller
thingiverse
free
![NES Controller](/t/4884055.jpg)
NES Controller
...nes controller
thingiverse
this is just a simple nes controller prop. display purposes only.
thingiverse
free
![Frame control](/t/5002176.jpg)
Frame control
...frame control
thingiverse
installation led 12864 reprapdiscount for control machine 3d printer.
thingiverse
free
![Control Tower](/t/4912374.jpg)
Control Tower
...control tower
thingiverse
control tower or marshall tower for 1/32 slot car track
thingiverse
free
![Controller Hook by P0chapa](/t/8272666.jpg)
Controller Hook by P0chapa
... for (maybe) any game controller.
i attached this thing to ps2 controller and third-party xbox controller with double sided tape.
thingiverse
free
![Xbox 360 controller stand for 3 controllers by afrolucas](/t/8742895.jpg)
Xbox 360 controller stand for 3 controllers by afrolucas
...xbox 360 controller stand for 3 controllers by afrolucas
thingiverse
update for 3 controllers
thingiverse
free
![PS4 Controller Stand for 3 Controllers (Dualshock 4)](/t/4890978.jpg)
PS4 Controller Stand for 3 Controllers (Dualshock 4)
...the stands for a nvidia shield controller rather than a ps4 controller (so two ps4 controllers and one nvidia shield controller).