Thingiverse
Pi & Camera Enclosure
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is a different version of "Pi Camera Enclosure for Beecounting" for an outside view of the hive & a different camera, but maybe not as accurate. Or maybe you want to use it for a different OpenCV project or just a streaming cam? You will need to glue a piece of Lexan over the hole for the camera and/or the TLS2591 lux sensor.
I added a lens cover to use a lens out of an old mini flashlight instead of lexan for a cleaner look. The STL I uploaded is for a 20mm lens so measure your own lens and make your own STL with OpenSCAD or the Customizer app. I would compile all the STL's with OpenSCAD since the file changed so much since I first wrote it and there are so many different options.
Added a "roof" to keep rain and sunshine (heat) off the Pi enclosure. Glue or screw a piece of sheet metal, opaque reflective plastic, etc to it.
https://www.thingiverse.com/thing:3894010
This is the camera type....
https://www.ebay.com/itm/Raspberry-Pi-4-Camera-Module-5MP-1080P-720P-Video-Camera-FFC-Cable-for-Pi-4-3/333370367368
or this IR camera....
https://www.ebay.com/itm/Night-Vision-IR-5MP-Camera-Module-Board-72-For-Raspberry-Pi-3-2/173978270209
OpenCV ....
https://opencv.org/
Other links....
https://www.ebay.com/itm/DC-DC-Mini-3A-Converter-Adjustable-Step-down-Power-Supply-Module-replace-LM2596/312517595574
https://www.adafruit.com/product/1980
https://www.adafruit.com/product/3660
https://github.com/rcrum003/HiveControl
https://github.com/rcrum003/HiveControl/wiki/BeeCounter-Setup
http://hivetool.net/
// Which part would you like to see?
part = "11"; // [1:Pi Plate,2:Support,3:Cover,4:Sensor Cup,5:Sensor Cap,6:Camera Plate,7:Lens Cover,8:Lux Lens,9:Pi Plate & Support,10:Pi Plate,Sensor Cup & Support,11:All]
//Do you want a camera?
Camera="yes";//[yes,no]
//Which Camera? Hole out the cover or hole out the bottom?
Which_Camera="1";//[1:Pi Camera,2:IR Camera]
// Pi Camera has two different types. One has 12.5x21mm hole spacing with the camera lens centered between the 2 top screws, the other 13.5x21mm spacing with the camera lens centered between all 4 screws
Camera_Type="2";//[1:12.5mm,2:13.5mm]
//Put the end of the lens where you want
Camera_mount_height=10;//[1:.5:20]
//If its an Pi camera hole diameter in cover
Cover_hole_size=17;//[4:.5:20]
//If with Lens Cover
Lens_diameter=20;// [5:.5:50]
// Might want to recess the lens a little to help shed water and/or shade the lens.
Lens_thickness=8;//[1:.5:15]
Lens_cover_height=15;//[4:.5:20]
//If its an IR camera do you want LEDs?
LEDs="yes";//[yes,no]
// Do you want a hole for wire or a slot for a 90 degree angle micro USB (17x8mm)?
Hole_USB="1";//[1:Hole,2:USB]
Wire_entrance_hole_size=16;//[4:.5:16]
// Do you want a Vent in your Pi Plate?
Vent="yes";//[yes,no]
// Do you want a honeycomb grill on the vent?
Grill="yes";//[yes,no]
// Do you want a fan on your Pi Plate? (30mm with sensor cup 40mm without)
Fan="yes";//[yes,no]
// Do you want a Sensor cup in your Pi Plate?
Sensor_cup="no";//[yes,no]
Sensor_Cup_depth=40;//[30:1:45]
// Do you want posts or holes to mount your Pi?
Posts_or_holes="2";//[1:Posts,2:Holes]
// Hivetool tophat needs 9.5mm shoulders instead of 3mm for IR camera clearance
Hivetool_tophat="no";//[yes,no]
// Do you want a recess (18x24x3mm) for a DC/DC Converter in your Pi Plate?
D_Sun_DC_DC_Converter="no";//[yes,no]
// Do you want holes out the bottom to power your DC/DC Converter in your Pi Plate?
Holes_out_bottom="yes";//[yes,no]
// Cover depth from the top of the Pi Plate (Minimum 30mm with Camera & plug in jumpers,50mm for a Hivetool tophat & IR Camera)
Cover_depth=30;//[24:1:80]
Cover_wall_thickness=2.4;//[2:.1:5]
// Do you want to mount a TSL2591 Lux sensor in the cover?
TSL2591_mount="no";//[yes,no]
// Do you want to generate a Lens cover for the TSL2951? Minimum 30mm.
Lux_Lens="yes";//[yes,no]
Lux_lens_diameter=30;//[30:1:60]
Lux_Lens_thickness=2;//[1:.5:15]
//Screw hole size for mounting
Mount_hole_size=4;//[2:.5:6]
Support_height=25;//[8:.5:20]
I added a lens cover to use a lens out of an old mini flashlight instead of lexan for a cleaner look. The STL I uploaded is for a 20mm lens so measure your own lens and make your own STL with OpenSCAD or the Customizer app. I would compile all the STL's with OpenSCAD since the file changed so much since I first wrote it and there are so many different options.
Added a "roof" to keep rain and sunshine (heat) off the Pi enclosure. Glue or screw a piece of sheet metal, opaque reflective plastic, etc to it.
https://www.thingiverse.com/thing:3894010
This is the camera type....
https://www.ebay.com/itm/Raspberry-Pi-4-Camera-Module-5MP-1080P-720P-Video-Camera-FFC-Cable-for-Pi-4-3/333370367368
or this IR camera....
https://www.ebay.com/itm/Night-Vision-IR-5MP-Camera-Module-Board-72-For-Raspberry-Pi-3-2/173978270209
OpenCV ....
https://opencv.org/
Other links....
https://www.ebay.com/itm/DC-DC-Mini-3A-Converter-Adjustable-Step-down-Power-Supply-Module-replace-LM2596/312517595574
https://www.adafruit.com/product/1980
https://www.adafruit.com/product/3660
https://github.com/rcrum003/HiveControl
https://github.com/rcrum003/HiveControl/wiki/BeeCounter-Setup
http://hivetool.net/
// Which part would you like to see?
part = "11"; // [1:Pi Plate,2:Support,3:Cover,4:Sensor Cup,5:Sensor Cap,6:Camera Plate,7:Lens Cover,8:Lux Lens,9:Pi Plate & Support,10:Pi Plate,Sensor Cup & Support,11:All]
//Do you want a camera?
Camera="yes";//[yes,no]
//Which Camera? Hole out the cover or hole out the bottom?
Which_Camera="1";//[1:Pi Camera,2:IR Camera]
// Pi Camera has two different types. One has 12.5x21mm hole spacing with the camera lens centered between the 2 top screws, the other 13.5x21mm spacing with the camera lens centered between all 4 screws
Camera_Type="2";//[1:12.5mm,2:13.5mm]
//Put the end of the lens where you want
Camera_mount_height=10;//[1:.5:20]
//If its an Pi camera hole diameter in cover
Cover_hole_size=17;//[4:.5:20]
//If with Lens Cover
Lens_diameter=20;// [5:.5:50]
// Might want to recess the lens a little to help shed water and/or shade the lens.
Lens_thickness=8;//[1:.5:15]
Lens_cover_height=15;//[4:.5:20]
//If its an IR camera do you want LEDs?
LEDs="yes";//[yes,no]
// Do you want a hole for wire or a slot for a 90 degree angle micro USB (17x8mm)?
Hole_USB="1";//[1:Hole,2:USB]
Wire_entrance_hole_size=16;//[4:.5:16]
// Do you want a Vent in your Pi Plate?
Vent="yes";//[yes,no]
// Do you want a honeycomb grill on the vent?
Grill="yes";//[yes,no]
// Do you want a fan on your Pi Plate? (30mm with sensor cup 40mm without)
Fan="yes";//[yes,no]
// Do you want a Sensor cup in your Pi Plate?
Sensor_cup="no";//[yes,no]
Sensor_Cup_depth=40;//[30:1:45]
// Do you want posts or holes to mount your Pi?
Posts_or_holes="2";//[1:Posts,2:Holes]
// Hivetool tophat needs 9.5mm shoulders instead of 3mm for IR camera clearance
Hivetool_tophat="no";//[yes,no]
// Do you want a recess (18x24x3mm) for a DC/DC Converter in your Pi Plate?
D_Sun_DC_DC_Converter="no";//[yes,no]
// Do you want holes out the bottom to power your DC/DC Converter in your Pi Plate?
Holes_out_bottom="yes";//[yes,no]
// Cover depth from the top of the Pi Plate (Minimum 30mm with Camera & plug in jumpers,50mm for a Hivetool tophat & IR Camera)
Cover_depth=30;//[24:1:80]
Cover_wall_thickness=2.4;//[2:.1:5]
// Do you want to mount a TSL2591 Lux sensor in the cover?
TSL2591_mount="no";//[yes,no]
// Do you want to generate a Lens cover for the TSL2951? Minimum 30mm.
Lux_Lens="yes";//[yes,no]
Lux_lens_diameter=30;//[30:1:60]
Lux_Lens_thickness=2;//[1:.5:15]
//Screw hole size for mounting
Mount_hole_size=4;//[2:.5:6]
Support_height=25;//[8:.5:20]
Similar models
thingiverse
free
Pi & Camera Enclosure for Bee Counting
...x_lens="yes";//[yes,no]
lux_lens_diameter=50;//[30:1:60]
lux_lens_thickness=2;//[1:.5:15]
support_height=15;//[8:.5:20]
thingiverse
free
Raspberry Pi Camera Objective Lens Adaptor by jbeale
.../www.ebay.com/itm/282167088666 which i have found has good image quality. perhaps better than the microscope objective used here.
thingiverse
free
Raspberry Pi Camera v2 cover and tripod mount by aimfeld
...wance of 0.1 mm so the parts can be "push-fitted" together. your mileage may vary depending on your printers tolerance.
thingiverse
free
RPI Case for wide len Camera and an IR Light Module
...ard-5mp-160-fish-eye-ir-night-vision-for-raspberry-pi/382080771732?sspagename=strk%3amebidx%3ait&_trksid=p2057872.m2749.l2649
thingiverse
free
smallLoadCell by ngdayo
...lf-bridge-ic-new-cu/231982702102?hash=item36033f1e16:g:rz4aaoswclnbpdxe:rk:1:pf:0
to see more info for hivetool goto hivetool.net
thingiverse
free
IR Filter for PI Camera Support by breogan_celta
...tps://www.ebay.es/itm/9-5mm-pro-2-optical-circular-blocking-uv-ir-cut-filters/302469628076?hash=item466c9840ac:g:jzoaaoswnjrzzjo1
thingiverse
free
Lumix DMC FZ1000 Tripod Plate
...4" 20 unc screw is offset just far enough from the centre of the tripod quick release that the lens is back on centre again!
grabcad
free
20 Slotted Optical Sensor Wheel
...ptical ir sensor (model: https://grabcad.com/library/ir-slotted-optical-sensor-module-1) you can measure the amount of rotations.
thingiverse
free
Laser line case with battery and switch by Reivax
...avity, a led inside, ste it in the little tube in the case.
i then use self sticking velcro tape to stick the cases on the wheel.
thingiverse
free
Raspberry Pi Camera Case by MendelBender
...d raspivid
server code. pictures show the raspberry pi model a+ along
with wifi via pi's usb.
https://youtu.be/7smtxoelyfu
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Pi
design_connected
$11
Pi
...pi
designconnected
ligne roset pi chairs computer generated 3d model. designed by thibault desombre.
3d_export
$5
raspberry pi
...raspberry pi
3dexport
carcasa para la raspberry pi
turbosquid
$18
pied
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
люста emme pi light
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
бра классическое emme pi light
3ddd
$1
Emme Pi Light
...emme pi light
3ddd
emme pi light
3ddd
$1
Emme Pi Light
...emme pi light
3ddd
emme pi light
design_connected
$16
Pi-Air
...pi-air
designconnected
living divani pi-air lounge chairs computer generated 3d model. designed by harry & camila.
3d_ocean
$15
Manneken Pis
...picting a naked little boy urinating into a fountain’s basin. (wikipedia) the model was sculpted in blender 2.70a rendered wit...
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
люстра классическая фирма: emme pi light
артикул: 3595/5/cot/12/wh
Camera
archibase_planet
free
Camera
...base planet
camera surveillance camera video camera
camera surveillance n090211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...hibase planet
camera security camera video camera
camera security n210515 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...se planet
camera web camera webcam
camera butterfly usb pc camera n090713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...mera
archibase planet
surveillance camera video camera camcorder
camera n011211 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera digital camera
camera canon digital n041211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera film camera phototechnique
camera n100214 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...amera
archibase planet
camera video camera camcorder
camera video n070315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...rchibase planet
camera video camera camcorder
camera studio n101213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Camera
...ibase planet
digital camera camera phototechnique
camera canon ixus 400 n310311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...ase planet
photocamera video camera camera
camera sony t300 black n291010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.