Thingiverse
Pi 3B Case for Prusa MK3 by jmckeown2
by Thingiverse
Last crawled date: 4 years, 1 month ago
NOTE: This is for a Raspberry Pi Model 3/3+ See HERE for the Pi 4 version.
I've seen many cases for mounting a Raspberry PI to the MK3 over the Einsy case. This mounts a Raspberry Pi 3B on the right side under the bed, which makes cable management a bit cleaner.
Print the bottom part and one of the tops depending on whether you need a slot for the camera's ribbon cable or not.
Also needed:
1x M4 T-nut for 30x30 extrusion
1x M4x10 cap (or pan head) screw.
2x M3 Square nuts
2x M3x 8MM cap screws up to 12mm length should work
Be sure to look for drop-in T-nuts, so they can be inserted without disassembling the frame.
I wouldn't necessarily recommend buying any of the following, because the kits contain too many parts for this project, but for reference I built my Pi case by pulling from the following products:https://www.amazon.com/gp/product/B0785PJZTP - M4 T-nuts for 30x30.https://www.amazon.com/gp/product/B015A351WS - M4x10 Cap screwshttps://www.amazon.com/gp/product/B018503K94 - M3 Square nutshttps://www.amazon.com/gp/product/B072FKMYMF - M3 Cap screw kit (various lengths)
Starting your shopping in the Prusa Spares bag is a good idea.
I've seen many cases for mounting a Raspberry PI to the MK3 over the Einsy case. This mounts a Raspberry Pi 3B on the right side under the bed, which makes cable management a bit cleaner.
Print the bottom part and one of the tops depending on whether you need a slot for the camera's ribbon cable or not.
Also needed:
1x M4 T-nut for 30x30 extrusion
1x M4x10 cap (or pan head) screw.
2x M3 Square nuts
2x M3x 8MM cap screws up to 12mm length should work
Be sure to look for drop-in T-nuts, so they can be inserted without disassembling the frame.
I wouldn't necessarily recommend buying any of the following, because the kits contain too many parts for this project, but for reference I built my Pi case by pulling from the following products:https://www.amazon.com/gp/product/B0785PJZTP - M4 T-nuts for 30x30.https://www.amazon.com/gp/product/B015A351WS - M4x10 Cap screwshttps://www.amazon.com/gp/product/B018503K94 - M3 Square nutshttps://www.amazon.com/gp/product/B072FKMYMF - M3 Cap screw kit (various lengths)
Starting your shopping in the Prusa Spares bag is a good idea.