Thingiverse
Phone stand with variable tilt by Humam87
by Thingiverse
Last crawled date: 4 years, 1 month ago
Tilt-adjustable mobile stand.
Tap gasket should be used as shown in the attached picture.
If the movement is not smooth, an adhesive tape is placed over the gasket.
To prevent the mobile from slipping, a line of silicone can be placed.
To prevent the holder from slipping, silicone dots can be placed on the foot.
In printing dynamic quality is used.
The support must be used in the part p1.
Parts p3 and p4 are not identical. Do not print one twice.
The gasket should be printed with flexible plastic TPU (I did not try that I used a ready-made tap gasket).
In order to assemble you may need to abrade the overlapping surfaces.
Tap gasket should be used as shown in the attached picture.
If the movement is not smooth, an adhesive tape is placed over the gasket.
To prevent the mobile from slipping, a line of silicone can be placed.
To prevent the holder from slipping, silicone dots can be placed on the foot.
In printing dynamic quality is used.
The support must be used in the part p1.
Parts p3 and p4 are not identical. Do not print one twice.
The gasket should be printed with flexible plastic TPU (I did not try that I used a ready-made tap gasket).
In order to assemble you may need to abrade the overlapping surfaces.