Phone stand for Phone with cover and power connection direct print by MakeDE

Last crawled date: 3 years, 2 months ago

I was looking for
a simple phone stand with
enough space for a fold able cover and
enough space for power connection.
Additionaly it is possible to handle the fingerprint button.
size: 110mm 65mm 96mm ( depth x width x height )
phone angle 45°
phone thickness incl. cover 17mm
It is direct printable on the side. Only small brim needed.
An overhang of 30° should be printable. -->0.4mm nozzle -> <0.2mm - 25% resolution needed.
A reduced print speed for outer wall can improve surface quality.