Thingiverse
Phantom 4 Pro Cree Strobe light by void68
by Thingiverse
Last crawled date: 4 years, 7 months ago
Cree Strobon Mount each port and starboard module with two clamps for the Phantom 4 Pro, perhaps also for the standard or advanced Phantom.
It is not really a remix but I took this
https://www.thingiverse.com/thing:2429835
as an idea and started from scratch. Somehow my Strobons didn't fit the original design, and I wanted to have 2 white LEDs to the front and a red or green to port and starboard.
Now it's a really good fit and so there is no way they might to fall out. Charging interface and button are easy to access. You have to print it in translucend PLA.
It is not really a remix but I took this
https://www.thingiverse.com/thing:2429835
as an idea and started from scratch. Somehow my Strobons didn't fit the original design, and I wanted to have 2 white LEDs to the front and a red or green to port and starboard.
Now it's a really good fit and so there is no way they might to fall out. Charging interface and button are easy to access. You have to print it in translucend PLA.