Thingiverse
Phaetus BMO to E3D Threaded Volcano Mount | Smart Effector by P_C_R
by Thingiverse
Last crawled date: 4 years, 5 months ago
If you want to upgrade your Volcano Hotend to a BMO without changing fans etc.
With the adapter the BMO will become the same lenght as a Threaded V6 with Volcano.
You have 4 options
Adapter with M12 1.0 pitch and M6 Bowden Coupling
Adapter with M12 1.5 pitch and M6 Bowden Coupling
Adapter with M12 1.0 pitch and Insert Coupling
Adapter with M12 1.5 pitch and Insert Coupling
the Insert Adapter. This is for guiding the PTFE Tube
The V6 Threaded Heatsink was sold with M12 1.0 pitch and M12 1.5 pitch
You will need 4x M2.5x8 screws (included in the BMO)
.setp files included
With the adapter the BMO will become the same lenght as a Threaded V6 with Volcano.
You have 4 options
Adapter with M12 1.0 pitch and M6 Bowden Coupling
Adapter with M12 1.5 pitch and M6 Bowden Coupling
Adapter with M12 1.0 pitch and Insert Coupling
Adapter with M12 1.5 pitch and Insert Coupling
the Insert Adapter. This is for guiding the PTFE Tube
The V6 Threaded Heatsink was sold with M12 1.0 pitch and M12 1.5 pitch
You will need 4x M2.5x8 screws (included in the BMO)
.setp files included