Thingiverse
Pet Food Meal Tracker by Vaoris
by Thingiverse
Last crawled date: 4 years, 6 months ago
A simple meal tracker intended to reduce how many times you have to ask "Has the pet been fed!?"
Had some serious warping setbacks. Would recommend printing on a wide brim, and reduce the number of layers at the top down to ~4.
10% infill worked sufficiently well.
Has a separate stl for the pieces to get the color change at the right layer. These pieces are small and a choking hazard. Keep away from children/pets until the assembly has been glued. Pieces are small and also recommend printing with a brim to improve adhesion to the print bed
Had some serious warping setbacks. Would recommend printing on a wide brim, and reduce the number of layers at the top down to ~4.
10% infill worked sufficiently well.
Has a separate stl for the pieces to get the color change at the right layer. These pieces are small and a choking hazard. Keep away from children/pets until the assembly has been glued. Pieces are small and also recommend printing with a brim to improve adhesion to the print bed