Thingiverse
PentaPot by XoGuSi
by Thingiverse
Last crawled date: 3 years, 1 month ago
With this pot and the plate you will have an ideal place for your plants.
At the bottom I added a small hole where the water could flow though if you gave too much. This is ideal for my Lithops which don't need so much water. There are coming from Africa and there the rain very rare..
From autumn to spring you shouldn't them water at all. From spring to autumn I am giving them 4-6 times water in 6 month.
You don't need supports and not a lot of infill. I used 15%. It depends on your taste which layer height you are using. I used a 0.5mm nozzle with a layer height of 0.3mm.
At the bottom I added a small hole where the water could flow though if you gave too much. This is ideal for my Lithops which don't need so much water. There are coming from Africa and there the rain very rare..
From autumn to spring you shouldn't them water at all. From spring to autumn I am giving them 4-6 times water in 6 month.
You don't need supports and not a lot of infill. I used 15%. It depends on your taste which layer height you are using. I used a 0.5mm nozzle with a layer height of 0.3mm.
Similar models
thingiverse
free
DIY a strong hand grip with strong springs 3D printed by zhwang168
...now how long the spring can be used. if you have some information please let me know. you are greatly appreciated. thanks a lot.
thingiverse
free
mock key by JSvdB
...ng your keychain design on the internet, so you don't have to use your reals keys.
o.1 mm layer height
0.2 first layer height
grabcad
free
DIY a strong hand grip
...o
supports:
no
resolution:
0.2
infill:
100%
filament_brand:
polymaker polyflex
filament_color:
black
filament_material:
pla
thingiverse
free
Snap Fit Stackable Parts Trays by String_Fellow
...e you need to change up tolerances for your printer.
my settings:
initial layer height: 0.3mm
layer height: 0.15mm
supports: none
thingiverse
free
Rubik's Cube by AustinMeck
...hough. you will probably have a few corners that print poorly and you have to redo them. the rest of the pieces were fine though.
thingiverse
free
Spring Razor from Dishonored by pksystems
...ork) cable. (disclaimer: don't play with fire) i carefully took a lighter to the wire, and stripped off the plastic coating.
thingiverse
free
Fruit Picker with twist v1 by Lionshead
... the extra leverage.
i also tried to use this on ripe figs - you'll need some sort of padding to prevent tearing them.
enjoy!
thingiverse
free
Nerf Disruptor spring spacer mod by Rebel91
...echanism with too much spring spacing.
if you have any suggestion, or want some size modification you can message me.
have fun :)
thingiverse
free
Christmas tree with customizable branches by franklinvv
...angs also depend on the way you customize the tree. check in your slicer.
i also included some example stls that you can produce.
thingiverse
free
FlowerVase by JPrint3D12
...er, although when i printed it on my ender 3, it didn't leak. it takes about 5 to 6 hours to print with a 0.15 layer height.
Xogusi
thingiverse
free
Canton CD 50 Holder by XoGuSi
...some month and it is stable.
we used m6 screws because printed pins are not working here. the holder was printed with 50% infill.
thingiverse
free
CactusHotel by XoGuSi
...ers for the bigger houses with diameters: 46mm, 51mm, 56mm, 61mm, 66mm, 71mm, 76mm, 81mm, 86mm, 91mm, 96mm, 97mm, 101mm and 102mm
thingiverse
free
Rubber band adjustable level slider by XoGuSi
...r band is fixed between the sensor and the slider. the other end is fixed with a knot.
the holder works fine and accurate for me.
thingiverse
free
3 Wheel Carriage (2020) with fans and autoleveling by XoGuSi
...nectors.
5) maybe i will put the fans also at the level holder under the belt.
6) maybe i will change the blower to a nicer look.