Thingiverse

Pentagram Ring remix (with instructions) by Snakedad
by Thingiverse
Last crawled date: 4 years, 1 month ago
Just flipped the original orientation and added instructions.
Generate supports
Only touching buildplate
Support overhang 60°
Print at 0.2mm, 0.18mm, 0.16mm, 0.14mm or 0.12mm.
Higher resolution (lower numbers) makes supports harder to remove.
Enable ironing and uncheck "iron only highest layer" if you don't like sanding your parts (still gonna require some sanding). It's a pretty small part, so bridge sagging won't be a problem if there's enough cooling.
Generate supports
Only touching buildplate
Support overhang 60°
Print at 0.2mm, 0.18mm, 0.16mm, 0.14mm or 0.12mm.
Higher resolution (lower numbers) makes supports harder to remove.
Enable ironing and uncheck "iron only highest layer" if you don't like sanding your parts (still gonna require some sanding). It's a pretty small part, so bridge sagging won't be a problem if there's enough cooling.