Thingiverse
Pen holder for CNC by bradmc
by Thingiverse
Last crawled date: 3 years ago
Pen holder for a home/hobby CNC. This thing is designed to be used with two 1/4-20 bolts. One screws in from the flat side and is chucked into the router's 1/4" collet. The other is used to lock in the pen or pencil. Neither of the holes are designed with threads inside. I printed at 60% infill so it wouldn't flex while drawing and there would be plenty of material for the bolts to cut threads into.
Set the pen so it looks like the tip is in line with the spindle center. Lower the Z axis until the tip touches a piece of paper. Rotate the spindle/collet 360 degrees. If the pen draws a circle, it needs to be adjusted. If it stays in one spot and just makes a dot, you have it set correctly.
The pen slot is sized based on a standard Sharpie Permanent Marker, with about an extra millimeter of radius for slightly larger pens. The side opposite the set screw is tapered to a point to accept smaller diameter pens too.
Set the pen so it looks like the tip is in line with the spindle center. Lower the Z axis until the tip touches a piece of paper. Rotate the spindle/collet 360 degrees. If the pen draws a circle, it needs to be adjusted. If it stays in one spot and just makes a dot, you have it set correctly.
The pen slot is sized based on a standard Sharpie Permanent Marker, with about an extra millimeter of radius for slightly larger pens. The side opposite the set screw is tapered to a point to accept smaller diameter pens too.
Similar models
thingiverse
free
CNC Pen Holder by neilferreri
.... will work with different diameter pens.
currently two versions, one for a 1/4" shank and the other for a 1/8" shank.
thingiverse
free
Pen/Sharpie holder for 500W CNC Spindle
...ger.
use only if your surface is pretty even as it has not any flexibility to compensate.
let me know if you have any feedback!
thingiverse
free
CNC Router Mounted Pen Holder by mnelson78
...e collet and the pen holder
2- m3 bolts at least 10mm long, ideal would be 15mm long.
https://www.youtube.com/watch?v=tp7wzb-hek4
thingiverse
free
Sharpie Pen Holder for V-slot CNC by Wombat_Bob
...hoto with the test writing is the most up to date image. i made a couple of small revisions to the design after the first photos.
thingiverse
free
Pen holder by yohabi
...signatures ;) it uses threaded rod which length is similar to a regular pen. threaded rod produces strength for...
thingiverse
free
Pen holder for CNC (43mm spindle) by jszewczyk
...pen holder for cnc (43mm spindle) by jszewczyk
thingiverse
pen holder for cnc to mount pen/pencil instead of 43mm spindle.
thingiverse
free
Maslow CNC 1/2 Collet Pen Holder Alignment Tool
...d be. this same tool could be used for any 1/2 in collet so you can use this for other router based cncs or maybe something else!
thingiverse
free
SnapMaker 2.0 Accessories Draw by DaleDouglasUK
...ers.
it was designed to be used as a draw with https://www.thingiverse.com/thing:4353295 however could easily be used with a lid.
thingiverse
free
Sharpie Pen Mount for X-Carve CNC with Dewalt 611 Router
... required are: 2x "m3" machine bolt for the spindle holder, and 1x "m4" machine bolt for the sharpie holder.
thingiverse
free
CNC drag-knife / vinyl-cutter holder for Graphtec CB09 style drag-knife
...hould be a push-fit into the holder, and the holder can then just be clamped into the 1/4" collet, just like any router bit.
Bradmc
thingiverse
free
Large knob for Nema 23 stepper motor by bradmc
...hingiverse
large (60mm diameter) hand knob for a nema 23 stepper motor. friction fit on the shaft with no need for a set screw.
thingiverse
free
Drip catcher tray for Philips Sonicare by bradmc
...de this so i could set the toothbrush in my wooden cabinet after using it without worrying that the water would ruin the shelves.
thingiverse
free
CNC table hold downs by bradmc
...up to 1" thick material. you need one lock part per hold-down. print the locks upside down (with the tips pointed upward).
thingiverse
free
Parametric CNC Hold-Down Clamp by bradmc
...ly saved in the script work perfectly for me when used with a 1/4-20 thread bolt. i like to use toilet flange bolts for t-track.
thingiverse
free
SodaStream Fizz bottle holster by bradmc
...ng beyond the edge of the rectangle drip cup. i just added a new stl file for a larger rounded drip cut that catches everything.
thingiverse
free
Delta 36-725 Table Saw Fence Handle by bradmc
...the grip fits over has an m6-1.0 thread in the base. this thing has a hole in the bottom so you can add the screw to keep it on.
thingiverse
free
Rain cap for Reese Towpower #21141 adjustable hitch by bradmc
...r, but not nearly as much as if the top is open. i glued the cap in using some black rtv sealant since it is what i had on hand.
thingiverse
free
Graupner MZ-12 Limiter Discs by bradmc
...e discs down to the transmitter gimbal surrounds. here is the original post from ft:
http://flitetest.com/articles/limiter-discs
thingiverse
free
Solo Cup phone holder/amplifier for rope hammock by bradmc
... the two pivots on the ring. tighten then down just enough so the hook moves easily but is not completely free-moving and loose.
Pen
3d_export
free
pen-
...pen-
3dexport
files - pen - pen with cap files - pen1 - pen without cap
3d_ocean
$8
Pen
...f a refill pen , all parts are modeled separately , material applied , and rendered with mental-ray. easily editable layered file
3d_export
$5
pen
...pen
3dexport
pen
3ddd
$1
Wacom Pen and Pen Stand
...wacom pen and pen stand
3ddd
wacom
wacom pen and pen stand
3d_export
$5
pen
...pen
3dexport
ball pen, two sizes of the ballpoint pen model - large and normal
archibase_planet
free
Pens
...pens
archibase planet
pens pen writing-materials
pens set n271114 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_export
$5
pen
...pen
3dexport
metal pen, 4 textures 4096x4096, cycles render
3d_ocean
$4
Pen
...pen
3docean
3d models miscellaneous pen
3d models, miscellaneous
3d_export
$5
pen
...pen
3dexport
simple pen in corona render. make in 2018 max version.
design_connected
$13
Pen
...pen
designconnected
sollos pen computer generated 3d model. designed by almeida, jader.
Cnc
3d_export
$35
Cnc
...cnc
3dexport
the cnc machine is unfinished
3d_export
$10
cnc router
...cnc router
3dexport
prototipe cnc router
3d_export
$10
cnc machine
...cnc machine
3dexport
cnc machine model with individual model files with assembly
3d_export
$5
Cnc 3D Model
...cnc 3d model
3dexport
cnc
cnc 3d model csiszar 61289 3dexport
turbosquid
$10
cnc bedroom
...osquid
royalty free 3d model cnc bedroom for download as max on turbosquid: 3d models for games, architecture, videos. (1494981)
turbosquid
$9
cnc(wood)
...rbosquid
royalty free 3d model cnc(wood) for download as max on turbosquid: 3d models for games, architecture, videos. (1189189)
turbosquid
$1
CNC Frame
...rbosquid
royalty free 3d model cnc frame for download as stl on turbosquid: 3d models for games, architecture, videos. (1371706)
turbosquid
free
cnc table
...rbosquid
royalty free 3d model cnc table for download as max on turbosquid: 3d models for games, architecture, videos. (1500926)
turbosquid
$30
CNC Lathe
...
royalty free 3d model cnc lathe for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1284634)
turbosquid
$25
CNC Machine
...
royalty free 3d model cnc machine for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1307199)
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.