Thingiverse
Pegboard Dropper Bottle Rack by Thaylar
by Thingiverse
Last crawled date: 4 years ago
Photographed make was my prototype. Increased the base by 1 mm to increase it's strength. I tried to make it as slim/skinny as possible to reduce print time.
Mounted to standard USA peg board using a size 12 machine thread screw 1/2 inch long. I simply bought a package of 100 screws with bolts from the hardware store for 5 US dollars.
If you're Metric, grab maybe an M6 by 8mm or so.
Print time is 1 hour 10 minutes on the standard 0.28 mm setting in Cura with all the default settings. I customized nothing.
No Supports Required!
This is actually a remix using: https://www.thingiverse.com/thing:3073533
The remix option just wasn't finding it...
Will fit any dropper bottle measuring 25mm external diameter.
Mounted to standard USA peg board using a size 12 machine thread screw 1/2 inch long. I simply bought a package of 100 screws with bolts from the hardware store for 5 US dollars.
If you're Metric, grab maybe an M6 by 8mm or so.
Print time is 1 hour 10 minutes on the standard 0.28 mm setting in Cura with all the default settings. I customized nothing.
No Supports Required!
This is actually a remix using: https://www.thingiverse.com/thing:3073533
The remix option just wasn't finding it...
Will fit any dropper bottle measuring 25mm external diameter.