Thingiverse
Peerless by Tymphany 830855 4" Driver Enclosure by Ryansfishn
by Thingiverse
Last crawled date: 4 years, 6 months ago
I designed this enclosure to fit the Peerless by Tymphany SDS Series 830855 4" Woofer found on Parts Express.
https://www.parts-express.com/peerless-by-tymphany-sds-series-830855-4--woofer-8-ohm--264-1065
Its designed to be .04 cu/ft as per the speaker's specifications, and allows you to line up the speaker's flat edges to the first layer's print lines and drill mounting and wire holes of your own size and orientation.
Ender 3 Pro
80mm/s
No supports
1.75 PLA
210C
.8 nozzle
100% Infill
Taking approximately 10 hours.
Feel free to modify for your own desire, orientation, or application.
https://www.parts-express.com/peerless-by-tymphany-sds-series-830855-4--woofer-8-ohm--264-1065
Its designed to be .04 cu/ft as per the speaker's specifications, and allows you to line up the speaker's flat edges to the first layer's print lines and drill mounting and wire holes of your own size and orientation.
Ender 3 Pro
80mm/s
No supports
1.75 PLA
210C
.8 nozzle
100% Infill
Taking approximately 10 hours.
Feel free to modify for your own desire, orientation, or application.