Thingiverse
PCB Centrifugal Claw
by Thingiverse
Last crawled date: 6 years, 1 month ago
PCB Centrifugal Claw
To make PCBs with good quality the method of UV light is so intersting. One of the confection's steps is centrifuge the PCB after paint its face with the photosensitive ink. With the 3D Models that I create, now we can use a mini drill to centrifuge the PCB and make it uniform. It's only 2 pieces:
Rail
Claw
(The last one needs to be printed 2 times.)
After assemble is only adjust the PCB on center of the piece and connect into drill chuck!
A good thing is that with a holder like this we can put ink on both sides of the PCB to spin at the same time.
P.S.1: To join the pieces is necessary put screws and screw-nutsP.S.2: The project is in the testing phase, some modifications can be made
More https://github.com/Arthurlcastro
To make PCBs with good quality the method of UV light is so intersting. One of the confection's steps is centrifuge the PCB after paint its face with the photosensitive ink. With the 3D Models that I create, now we can use a mini drill to centrifuge the PCB and make it uniform. It's only 2 pieces:
Rail
Claw
(The last one needs to be printed 2 times.)
After assemble is only adjust the PCB on center of the piece and connect into drill chuck!
A good thing is that with a holder like this we can put ink on both sides of the PCB to spin at the same time.
P.S.1: To join the pieces is necessary put screws and screw-nutsP.S.2: The project is in the testing phase, some modifications can be made
More https://github.com/Arthurlcastro