Thingiverse
PCB and Work Holding Vices by Hanthony
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a set of accessories for the very cool PCB Workstation project -http://www.thingiverse.com/thing:801279
Quick-Release PCB Clamp
This pair of clamps is based on the original PCB Clamps in the kit but have a semi-circular clamping surface. This means that they can easily twist sideway to release the board.This is a lot quicker and simpler then loosing and then readjusting the clamps.
Top-Mounted PCB Holder
The original PCB holder but with guides on the top so that if you don't need the board to be clamped it can just be dropped into place
Small, 25mm and 50mm Vices
Designed for holding small pieces of work these Vices just clamp right into place on the existing base to provide 2, 3 or even 4 jaw work-holding.
All vices have both flat faces and cut faces for handling round stock..
Quick-Release PCB Clamp
This pair of clamps is based on the original PCB Clamps in the kit but have a semi-circular clamping surface. This means that they can easily twist sideway to release the board.This is a lot quicker and simpler then loosing and then readjusting the clamps.
Top-Mounted PCB Holder
The original PCB holder but with guides on the top so that if you don't need the board to be clamped it can just be dropped into place
Small, 25mm and 50mm Vices
Designed for holding small pieces of work these Vices just clamp right into place on the existing base to provide 2, 3 or even 4 jaw work-holding.
All vices have both flat faces and cut faces for handling round stock..