Thingiverse
Parrot Disco Power Button and Longer by JamesInFrisco
by Thingiverse
Last crawled date: 4 years, 2 months ago
Well the Disco button thing that is already in the Thingiverse was not really what I needed so I made my own using my trusty Micrometer. I am working on putting the CHUCK in several other air frames like the Reptile Harrier S1100 and needed various length buttons. (Yes being a software guy I'm working on a board to convert the one ESC CHUCK output to 2 and 3 motors or ESC outputs for the S1100).
For best quality I print with the two parts flipped so LED and Pitot tubes are up with Lite supports. It seems to work on the CHUCK but I need to move the LED forward just a tad so V3 coming (maybe). Let me know what you think. Also this has two holes designed for a nylon thread or string to help keep the button in or near the Disco if a crash happens. Hope this helps!!
Added 1cm, 2cm, 3cm and 4cm longer.
For best quality I print with the two parts flipped so LED and Pitot tubes are up with Lite supports. It seems to work on the CHUCK but I need to move the LED forward just a tad so V3 coming (maybe). Let me know what you think. Also this has two holes designed for a nylon thread or string to help keep the button in or near the Disco if a crash happens. Hope this helps!!
Added 1cm, 2cm, 3cm and 4cm longer.