Thingiverse
Parametric Toggle Switch Library by txoof
by Thingiverse
Last crawled date: 4 years, 10 months ago
This toggle switch can be used in mockups. Adjust the parameters in the library to match your switch.
Import it into a project by issuing use
Call the switch with switch();
Switch accepts the following parameters:
nutH1= height of bottom retaining nut
nutH2= height of top retaining nut
center="nut"/"body" - center on the body or at the top of H1.
Import it into a project by issuing use
Call the switch with switch();
Switch accepts the following parameters:
nutH1= height of bottom retaining nut
nutH2= height of top retaining nut
center="nut"/"body" - center on the body or at the top of H1.