Thingiverse
Parametric Tatting Shuttle by pruby
by Thingiverse
Last crawled date: 4 years, 4 months ago
WARNING: This has not been printed yet, please treat as concept only for now.
Assembled model is for visualisation only. It lacks clearance and is not suitable for printing by itself - if attempting a print, please use version in two halves.
This is an experiment creating a parametric tatting shuttle in OpenSCAD. My grandmother is a keen tatter, and would like me to try replicating the design of some of the shuttles she uses.
This device uses the Splines for OpenSCAD library here to produce smooth curves over the body:
https://www.thingiverse.com/thing:1468725
The shape of these things is terrible for 3d printing - can't print on any angle without support material. You'll want to print with some form of removable or dissolvable support.
Assembled model is for visualisation only. It lacks clearance and is not suitable for printing by itself - if attempting a print, please use version in two halves.
This is an experiment creating a parametric tatting shuttle in OpenSCAD. My grandmother is a keen tatter, and would like me to try replicating the design of some of the shuttles she uses.
This device uses the Splines for OpenSCAD library here to produce smooth curves over the body:
https://www.thingiverse.com/thing:1468725
The shape of these things is terrible for 3d printing - can't print on any angle without support material. You'll want to print with some form of removable or dissolvable support.