Thingiverse
Parametric Stand for SpotMicroESP32 by projunk
by Thingiverse
Last crawled date: 4 years, 11 months ago
Parametric Stand for SpotMicroESP32.
Required Printed Parts:
Stand.stl (2x)
StandConnector.stl (2x)
StandFoot.stl (4x)
Required OtherParts:
M3 nuts (8x)
M3 screw length 12 mm (8x)
Recommended Materials:
PLA (30%): Stand.stl, StandConnector.stl
Ninjaflex (10%): StandFoot.stl
Ninjaflex (10%): StandAntiSlip.stl
Changes 5 Jan 2021:
added optional StandAntiSlip.stl to avoid that robot slides in stand while testing
added optional Stand_TopHalf.stl and Stand_BottomHalf.stl which should be glued together. These parts can be used if the stand.stl does not fit the printbed
Required Printed Parts:
Stand.stl (2x)
StandConnector.stl (2x)
StandFoot.stl (4x)
Required OtherParts:
M3 nuts (8x)
M3 screw length 12 mm (8x)
Recommended Materials:
PLA (30%): Stand.stl, StandConnector.stl
Ninjaflex (10%): StandFoot.stl
Ninjaflex (10%): StandAntiSlip.stl
Changes 5 Jan 2021:
added optional StandAntiSlip.stl to avoid that robot slides in stand while testing
added optional Stand_TopHalf.stl and Stand_BottomHalf.stl which should be glued together. These parts can be used if the stand.stl does not fit the printbed