Thingiverse
Parametric LCD bezel with rounded corners by NilsR
by Thingiverse
Last crawled date: 4 years, 2 months ago
Based on:
http://www.thingiverse.com/thing:168389
It should fit any standard 16x2 HD44780 alphanumeric LCD module. The posts are made for M3 screws, other screws with a similar diameter might work. I had to drill the mounting holes in my display to 3mm, but that didn't hurt any tracks on the PCB.
Adjust to your needs in openSCAD or the Customizer!
Update: Not with a rim around the bezel! set rim height to 0 if you don't want it.
Update: Added a box. The example bezel should just fit on top of it. (untested, please give feedback!)
http://www.thingiverse.com/thing:168389
It should fit any standard 16x2 HD44780 alphanumeric LCD module. The posts are made for M3 screws, other screws with a similar diameter might work. I had to drill the mounting holes in my display to 3mm, but that didn't hurt any tracks on the PCB.
Adjust to your needs in openSCAD or the Customizer!
Update: Not with a rim around the bezel! set rim height to 0 if you don't want it.
Update: Added a box. The example bezel should just fit on top of it. (untested, please give feedback!)