Thingiverse
Parametric Fuel Canister Support Legs by gchristopher
by Thingiverse
Last crawled date: 4 years, 7 months ago
These help to hold a camping fuel canister stable. They're small and quick to print. Small differences in dimensions between manufacturers might affect how well support legs of this type work, so these are parameterizable for fine-tuning.
These have been tested with MSR, SnowPeak, and Jetboil 8oz/230g size canisters for the default parameter values.
These are probably even more useful when using small canisters that are more tippy than the large ones tested!
Updated 08/2015: Added the option to also print a small support peg directly underneath the edge of the canister. It's possible to break support legs without this peg if you push down hard on the canister. On a flat surface, this makes it pretty close to impossible to break them with direct downward pressure.
These have been tested with MSR, SnowPeak, and Jetboil 8oz/230g size canisters for the default parameter values.
These are probably even more useful when using small canisters that are more tippy than the large ones tested!
Updated 08/2015: Added the option to also print a small support peg directly underneath the edge of the canister. It's possible to break support legs without this peg if you push down hard on the canister. On a flat surface, this makes it pretty close to impossible to break them with direct downward pressure.