Thingiverse
Paracord Tool Spool
by Thingiverse
Last crawled date: 5 years, 4 months ago
This is a paracord spool with two holes for hex bit screwdriver tips, a built in razor (that can be easily removed if needed) for cutting the cord, a lighter sleeve, and 3 notches to secure the cord.
Assembly:
-A standard razor is carefully pushed through the slit in the razor half of the spool and secured with a 12mm M3 screw
-Two 8mm screw driver hex bits of your choosing can be inserted into the hexagonal holes on the ends of the spool
-The lighter sleeve holds a mini bic lighter. If the fit is too loose, I found that a single piece of electrical tape wrapped around the body of the lighter makes for a snug fit.
-The razor side of the spool and lighter side of the spool are then glued together using super glue
Assembly:
-A standard razor is carefully pushed through the slit in the razor half of the spool and secured with a 12mm M3 screw
-Two 8mm screw driver hex bits of your choosing can be inserted into the hexagonal holes on the ends of the spool
-The lighter sleeve holds a mini bic lighter. If the fit is too loose, I found that a single piece of electrical tape wrapped around the body of the lighter makes for a snug fit.
-The razor side of the spool and lighter side of the spool are then glued together using super glue