Thingiverse
PanelDue 5i Housing for Sapphire S
by Thingiverse
Last crawled date: 4 years, 4 months ago
This is a Housing for the PanelDue 5i Clone by Fysetc ( https://de.aliexpress.com/item/33004947638.html?spm=a2g0s.9042311.0.0.27424c4dqdux2o )
Please note that the FYSETC Version of the 5i differs to the original one!
There are two versions. One with 2 Button holes (16mm) and one with just one. I Use the 2 hole version to switch the LED lightning on and off with a momentary switch and the 2nd hole for a self reset momentary switch in combination with an SSR to switch the printer on by pressing the button for 2 Seconds, and swith it off by Menu or End-GCode. Both holes are 16mm diameter.
Print with front down and support the brackets.
I use PLA since its strong enough for this.
You can use the screws from te Housing of the original Display of the Sapphire S
Please note that the FYSETC Version of the 5i differs to the original one!
There are two versions. One with 2 Button holes (16mm) and one with just one. I Use the 2 hole version to switch the LED lightning on and off with a momentary switch and the 2nd hole for a self reset momentary switch in combination with an SSR to switch the printer on by pressing the button for 2 Seconds, and swith it off by Menu or End-GCode. Both holes are 16mm diameter.
Print with front down and support the brackets.
I use PLA since its strong enough for this.
You can use the screws from te Housing of the original Display of the Sapphire S
Similar models
thingiverse
free
BLV Cube Front Panel for Fysetc PanelDue 5i and 5"TFT by PeterG79
...just the front panel a bit.
the size is the same as their tft81050 5inch tft and will fit as well.
i use m3x5 screws to mount it.
thingiverse
free
Remix of Stwebster's Caribou Panel Due 5i Front Mount by JenPet
...for the paneldue 5'' clone version (from fysetc and all china clones) which has no controller buttons on the front side.
thingiverse
free
Fysetc 5i Clone PanelDue Touch Screen Case For Hypercube
...rint 1 housing, 1 angled mount, and 1 mirrored angled mount to use. solidworks file included for modifying the bracket if needed.
grabcad
free
16mm Push Button Momentary Yellow
...16mm push button momentary yellow
grabcad
16mm momentary switch button yellow (approximated)
thingiverse
free
Prusa PanelDue mount
... mount was inspired by https://www.thingiverse.com/thing:3286954 mount.
the back panel has a hole to fit the 4 pin cable through.
thingiverse
free
BLV MGN Cube PanelDue 5i mount
...to fit and so the aesthetics were off.
this one places the panel in the same position. there are holes to access the buttons too.
thingiverse
free
PanelDue 5i encloser by danny_v1
...er for the front, without any holes for the sd card or something else.
it can be mounted with one screw to a 2020 or 3030 frame.
grabcad
free
16mm LED Momentary Push Button
...16mm led momentary push button
grabcad
16mm led momentary push button, all plastic housing.
thingiverse
free
7mm momentary push button switch by mariuschirita
...ased the button from here:
http://www.ebay.co.uk/itm/5-x-black-on-off-miniature-momentary-push-to-break-switch-spst-/281769212448
grabcad
free
On/Off Switches
...on/off switches
grabcad
metal pushbutton - momentary (16mm) from sparkfun
5I
thingiverse
free
Support Panel 5I by jeje63
...u et place de l'écran d'origine sur la prédator
adaptable 5i panel support instead of the original screen on the predator
thingiverse
free
PanelDue 5i encloser by danny_v1
...er for the front, without any holes for the sd card or something else.
it can be mounted with one screw to a 2020 or 3030 frame.
3dfindit
free
Gold Sockets - TYPE T-5i Female
...gold sockets - type t-5i female
3dfind.it
catalog: accu-glass products
thingiverse
free
PanelDue 5i case by jhelmstetter
...e by jhelmstetter
thingiverse
created this when i could not find a case i liked. i'm currently working on a mounting method.
thingiverse
free
Paneldue 5i Enclosure
...stainless steel nuts utilized in this design were purchased from mcmaster carr: m5 (cat #: 91828a24) and m6 (cat #:91828a241).
thingiverse
free
BLV MGN Cube PanelDue 5i mount
...to fit and so the aesthetics were off.
this one places the panel in the same position. there are holes to access the buttons too.
thingiverse
free
Caribou Panel Due 5i Front Mount by Stwebster
...wo mounts.
you also need to print the brackets 4x - and longer screws(m6x30) to mount them!
thanks to bernd for the test print :)
thingiverse
free
Fysetc 5i Clone PanelDue Touch Screen Case For Hypercube
...rint 1 housing, 1 angled mount, and 1 mirrored angled mount to use. solidworks file included for modifying the bracket if needed.
thingiverse
free
BLV Cube Front Panel for Fysetc PanelDue 5i and 5"TFT by PeterG79
...just the front panel a bit.
the size is the same as their tft81050 5inch tft and will fit as well.
i use m3x5 screws to mount it.
Paneldue
thingiverse
free
PanelDue enclosure by dc42
... version 2.0 in customizer.
new! this design now supports the integrated 5" and 7" versions of paneldue in customizer.
thingiverse
free
PanelDue 5" Back Cover for RailcoreII by kraegar
... railcoreii
does not fit the paneldue 5i
use with dc42's 5" paneldue case here: https://www.thingiverse.com/thing:656884
thingiverse
free
PanelDue 7i by kamikazer2
...paneldue 7i by kamikazer2
thingiverse
you need 4 m3x30 + nuts and 1 m3x6
thingiverse
free
Prusa PanelDue mount
... mount was inspired by https://www.thingiverse.com/thing:3286954 mount.
the back panel has a hole to fit the 4 pin cable through.
thingiverse
free
PanelDue 4.3" Compact Enclosure by SlimShader
...losure by slimshader
thingiverse
a compact enclose for the paneldue 4.3" display, frame mountable complete with back plate.
thingiverse
free
Ormerod PanelDue mounting bracket by 3jimd
...acket by 3jimd
thingiverse
this is a bracket and hinge for mounting dc42's paneldue lcd control panel on the reprap ormerod.
thingiverse
free
Sapphire plus duet paneldue mount by Szwalkiewicz
... the factory location
i use the paneldue lcd case form lumberjackengineering to completehttps://www.thingiverse.com/thing:2799628
thingiverse
free
PanelDue 5i encloser by danny_v1
...er for the front, without any holes for the sd card or something else.
it can be mounted with one screw to a 2020 or 3030 frame.
thingiverse
free
Case for PanelDue 4.3 duet3d by drbit
...for paneldue 4.3 duet3d by drbit
thingiverse
compact case for paneldue 4.3 duet3d
need m3 bolts
added support lerdge screen size
thingiverse
free
Bracket for a PanelDue by stephenrc
...ne for the 4.3" and in the scad file there is a version with a tab on one end for mounting above or below a horizontal 2020.
Sapphire
turbosquid
$30
Sapphire
...alty free 3d model sapphire for download as obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1304434)
turbosquid
$9
Sapphire
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
sapphire pro
...sapphire pro
3dexport
sapphire pro 3d printer head mask
turbosquid
$35
Sapphire ring
...quid
royalty free 3d model sapphire ring for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1320838)
turbosquid
$22
Ring with sapphires
...royalty free 3d model ring with sapphires for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1375607)
turbosquid
$20
sapphire ring
...quid
royalty free 3d model sapphire ring for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1306560)
turbosquid
$3
Zora Sapphire
... free 3d model zora sapphire for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1613795)
turbosquid
$50
sapphire ring
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Sapphire ring
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Sapphire Lode
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Housing
archibase_planet
free
House
...t
house residential house private house wooden house
house wooden n290815 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
House
...use residential house private house wooden house
house wood stone n140815 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
House
...ibase planet
house residential house building private house
house n050615 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
House
...ibase planet
house residential house building private house
house n030615 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
House
...ibase planet
house residential house building private house
house n230715 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
House
...ibase planet
house residential house building private house
house n240615 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
House
...ibase planet
house residential house building private house
house n290815 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
House
...ibase planet
house residential house building private house
house n110915 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
House
...ibase planet
house residential house building private house
house n120915 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
House
...ibase planet
house residential house building private house
house n210915 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.