Thingiverse
Pancake Padlock by zbzzn
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is my 3d printable variation on the famous 6 lever Champion pancake lock.
It uses real springs from a generic springs set off Aliexpress. The springs used are:
1 Compression 23/64" X1-3/8" for the shackle
2 Compression 1/4" X13/32" for the levers
If you print the V1 version of the body you will also need 3 16x4mm rods as the axes of the levers and the blocker. IMHO it looks nicer with those but if you don't want to mess with steel rods you can print the V2 version which uses 3d printed axes, it works just fine.
It uses real springs from a generic springs set off Aliexpress. The springs used are:
1 Compression 23/64" X1-3/8" for the shackle
2 Compression 1/4" X13/32" for the levers
If you print the V1 version of the body you will also need 3 16x4mm rods as the axes of the levers and the blocker. IMHO it looks nicer with those but if you don't want to mess with steel rods you can print the V2 version which uses 3d printed axes, it works just fine.
Similar models
thingiverse
free
Mini Compression spring shocks by TikiLuke
...ressed. i used 23/64 x 1 3/8 compression springs.
note there's a v2 version available too. it's a little tougher design.
thingiverse
free
DartKrafts Retaliconshot Plunger Spring Retainer by DartKrafts
...-8mm!
update: file changed to 'open ended' version so it is compatible with stock retaliator tube and plunger tolerances.
thingiverse
free
Mini Compression Spring Shock V2 by TikiLuke
...e whole thing. there are reinforced shafts and sections to fit an 11/16 wrench. i used a 23/64 x 1 3/8 compression spring inside.
grabcad
free
Hot Rod Leaf Spring Perch
...hot rod leaf spring perch
grabcad
this is for a 2.5" cross member to mount a 1 3/4" leaf spring.
thingiverse
free
Pull/Push switch automotive (brake switch or neutral clutch switch) by Camaroman
... the springs.
the size of the springs is 9/32'' x 3/4'' (compressed spring).
you need 3 screw m3x15 for the body.
thingiverse
free
Nerf Sharp Shot "Nickel" Spring Rest
...ot "nickel" spring rest
thingiverse
why use nickels when you can use science and cad to compress the spring some more?
grabcad
free
Sig P226 Recoil Spring
...sembled" state, but the turn count and taper are correct. the orange band indicates the end that assembles to the guide rod.
thingiverse
free
Device to produce PLA springs by mdedm
...ament around a dowel with the sides of the filament touching, you could make an extension spring instead of a compression spring.
thingiverse
free
Spring-loaded Replicator 1 Drive Block - Modified Lever by gyronictonic
...#92010a112
1 x m3 x 16mmhttp://www.mcmaster.com/#91420a126
1 x 623z bearinghttp://www.robotdigg.com/product/62/623zz-ball-bearing
thingiverse
free
Cyberpunk 2077 Tamayura Pistol by Pharaoh439
...he slide runner.this is designed to use a 23/64" x 1-3/8" compression spring. it's all i had on hand when building.
Zbzzn
thingiverse
free
Taofledermaus medalion by zbzzn
...taofledermaus medalion by zbzzn
thingiverse
this is a medallion based on the traced taofledermaus symbol
thingiverse
free
Padlock by zbzzn
...rinting:
0.02 layer with no supports for all parts is good enough.
note: i fixed the issue in the shackle, please download again.
thingiverse
free
Front Loader by zbzzn
...tance between the pin holes and 1.9mm between the first hole and the lock lip.
the files can be opened using google sketchup 2017
thingiverse
free
Calligaris chair leg bottom by zbzzn
... you know sometimes the little plastic pads on the bottom of the chair break off. this is a replacement part for the bottom pads.
thingiverse
free
Taofledermaus bat cookie/candy mold by zbzzn
... on the taofledermaus bat symbol.
it fits a 7cm round mold for the green perimeter.
it has a hole cut into it for the candy stick
thingiverse
free
Euro profile cylinder holder for milling by zbzzn
... for a euro profile cylinder you can put in a vice. you can print it as draft. slot at the bottom ensures some flex when clamping
thingiverse
free
Sika Sealant Nozzle (configurable) by zbzzn
...25/w/8a1abda8d4ebc2e8f4c15811/e/d0f87cf5122138949595caa0?configuration=hole_inner%3d0.0035%2bmeter%3bnozzle_height%3d0.05%2bmeter
thingiverse
free
Bosnian Bill Knife tool handle by zbzzn
... small slot on the side where you can slip a piece of windshield wiper insert to block the knife tool from going into the handle.
thingiverse
free
Pinning Box V4 by zbzzn
... bits and bobs.
the original version which i tested is v4 then i did some very minor adjustments as v4.1 but did not test it yet.
thingiverse
free
Bahco needle files handle by zbzzn
...ist.
v3 is smaller, use it if you are using the files for precision filing
inner hole is for 3.2mm diameter and 50mm shank length
Padlock
3d_ocean
$5
Padlock
...padlock
3docean
padlock
padlock
3d_export
$5
the padlock
...the padlock
3dexport
3d model of iron padlock
3d_ocean
$3
Padlock
...padlock
3docean
box door key lock locker open padlock treasure unlock
a simple padlock. uv unwrapped and textured
3d_ocean
$8
Padlock
...e key lock login padlock security
hires padlock created in blender 2.61 can be used in render or in games. textures are included.
3d_ocean
$4
Padlock
...hrome gold heart jewelry key lock login love metal metallic padlock romantic security
3d model of padlock. thank you for looking.
3d_export
$5
Padlock
...padlock
3dexport
realistic low-poly model of padlock with high quality pbr textures (4096x4096). rendering in v-ray.
turbosquid
free
Padlock
...id
free 3d model padlock for download as 3ds, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1350782)
turbosquid
$2
Padlock
...yalty free 3d model padlock for download as fbx, dae, and obj on turbosquid: 3d models for games, architecture, videos. (1700265)
turbosquid
$12
Padlock
... free 3d model padlock for download as fbx, obj, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1663746)
turbosquid
$7
padlock
...ree 3d model padlock for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1248009)
Pancake
3d_export
$7
pancakes
...pancakes
3dexport
pancakes sprinkled with honey with a slice of butter
turbosquid
$13
Pancakes
...alty free 3d model pancakes for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1297528)
turbosquid
$5
pancake
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Pancakes 3D Model
...
pancakes pancake food
pancakes n241016 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$10
Pancake 3D Model
...pancake 3d model
3dexport
pancakes hotcakes food cafe restaurant breakfast
pancake 3d model ivanna 29801 3dexport
turbosquid
$25
Pancake pan
...royalty free 3d model pancake pan for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1446409)
3d_export
$5
pancake
...middle-center (see the picture screenshot)<br>polygons: 23040<br>vertices: 11522<br>i hope you enjoy the model!
turbosquid
$20
Pancake With Chocolate Syrup
...ree 3d model pancake with chocolate syrup for download as fbx on turbosquid: 3d models for games, architecture, videos. (1493505)
turbosquid
$20
Mug Teapot Pancake
... model mug teapot pancake for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1462944)
turbosquid
$15
Strawberry shortcake Pancakes
...rtcake pancakes for download as max, obj, fbx, gltf, and usdz on turbosquid: 3d models for games, architecture, videos. (1702111)