Pan Tilt for ArWing Pro by baze

Last crawled date: 3 years, 4 months ago

Pan and Tilt camera for ArWing Pro. Designed for DJI camera.
Printing
Print all parts and assemble as shown in the picture. I used EMAX ES08MA servos but any mini sized servo should fit the mount.
Video of the pan&tilt in action can be found here: https://www.youtube.com/watch?v=wyQfTVJWBEQ
Detailed installation quide
Push servo into "base mount" and use small drop of glue to secure it in place
Push "servo ring" over the servo to create smooth plane for the main body to swivel on.
Push servos axis into "Camera mount" and use servos screw to secure the "camera mount" into the servo.
Screw DJI camera into "camera mount" from cameras lower mounting holes. (not too tight so that camera can pivot freely)
Screw "arm" to second servo and into DJI cameras upper mounting hole (not too tight so that camera can pivot freely)