Palmiga RC-Car Basilisk Tires

Last crawled date: 6 years, 2 months ago

‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾

PLEASE RESPECT THE LICENSE AND GIVE CREDIT TO THE DESIGNER

‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
Made this design like 2 years ago and did not have time to try them out, maybe you guys can try them instead? They were designed to be able to run on water :) (will the design also make it possible to turn while driving on the water?) but are very likely also great in soft sand, snow etc... https://youtu.be/1F0dRUcycSQ https://youtu.be/VHpOQspdEdI
I dedicate this work to the OpenRC project by Daniel Norée but as you can see the tires work on other cars too.

I have printed them in PI-ETPU 95-250 Carbon Black but you are free to use whatever you choose to :- )

But please check out my filament, it will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:

•The material composition eliminates “stringing / webbing” issues.
•The hardness of 95 shore A and the carbon black filler makes for great print abilities.
•The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very harsh environments.
•The matte black surface finish has a very exclusive look.
•The material feels very nice and dry to touch.
•The elongation at break is only 250%.

http://rubber3dprinting.com/
http://palmiga.com/

Follow me on Instagram and/or twitter:
http://instagram.com/rubber3dprinting
https://twitter.com/rubber3dprint

Please respect the license and give appropriate credit :-)

Due to the nature of 3D printing / material used etc... Keep in mind that you use my designs on your own risk and that I in no way is responsible for any damage och injuries.