Palmiga ESD Anti Static Protection for Vacuum Cleaner Nozzle

Last crawled date: 6 years, 1 month ago

Most people know its a bad idea to vacuum clean your PC or some other electronics due to the ESD issue (Electrostatic Discharge) sometimes frying the IC´s. Fast moving air will build up a static charge fast and you dont want a huge spark flying into your PCB... This design can be used on the vacuum cleaner nozzle to ground/earth the nozzle preventing
a ESD.

in the pictures I have printed with a 0,7mm nozzle at 40mm/s

‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
PLEASE RESPECT THE LICENSE AND GIVE CREDIT TO THE DESIGNER!
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
I do not claim that these designs will work in any special way or that it is safe to use. You use my designs on your own risk and I am in no way responsible for any damages or injuries.

https://youtu.be/snhUddhbN_8

Please check out my unique UV-stable, flexible and conductive filament called ETPU 95-250 Carbon Black filament.

Don´t need the conductivity? Well the conductivity is great for some things but perhaps not your first choice? Then consider this:

This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:

•The material composition eliminates “stringing / webbing” issues.
•The hardness of 95 shore A and the carbon black filler makes for great print abilities.
•The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very harsh environments.
•The matte black surface finish has a very exclusive look.
•The material feels very nice and dry to touch.
•It´s not too stretchy and will do great for timing belts etc.

http://rubber3dprinting.com/