Thingiverse
P6 RGB Matrix grid and stand by tblum
by Thingiverse
Last crawled date: 4 years, 3 months ago
A tetris clock based on a P10 16x32 RGB matrix and a ESP8266.
These are the 3D printed parts needed to build a tetris clock.
Please note: These matrices exist in different pitch sizes P10 means 10mm and results in 32x16 cm panels. The latest build is based on a P6 matrix that is roughly 20x10 cm in size.
See here for more informations on the project: https://www.instructables.com/id/Tetris-Time-on-a-P10-RGB-Matrix-With-ESP8266/
You find the code here: https://github.com/toblum/esp_p10_tetris_clock/
These are the 3D printed parts needed to build a tetris clock.
Please note: These matrices exist in different pitch sizes P10 means 10mm and results in 32x16 cm panels. The latest build is based on a P6 matrix that is roughly 20x10 cm in size.
See here for more informations on the project: https://www.instructables.com/id/Tetris-Time-on-a-P10-RGB-Matrix-With-ESP8266/
You find the code here: https://github.com/toblum/esp_p10_tetris_clock/