Thingiverse
P3Alum Desktop Router by outcastrc
by Thingiverse
Last crawled date: 4 years, 7 months ago
Very much a work in progress. But a couple people asked about the files so here it is.
If you happen to have a spare frame lying around with nowhere to go. And the ability to lathe a few parts (it would be easy to bypass this step and use a dremel and stock 8mm rods) And are crazy enough to tackle a larger project such as this (in my case it was to see if I can pull it off)
My setup is 24v, 100 ounce motors, 10mm on the x and y, 8mm on the z. dual motor on the Y as it also moves the bed (still have to cut the alum version). Brushless powered ER 16 collet spindle. Running GRBL shield on Chillipepper.
If you happen to have a spare frame lying around with nowhere to go. And the ability to lathe a few parts (it would be easy to bypass this step and use a dremel and stock 8mm rods) And are crazy enough to tackle a larger project such as this (in my case it was to see if I can pull it off)
My setup is 24v, 100 ounce motors, 10mm on the x and y, 8mm on the z. dual motor on the Y as it also moves the bed (still have to cut the alum version). Brushless powered ER 16 collet spindle. Running GRBL shield on Chillipepper.