Thingiverse
P2020 3D Printer by Chromatophore
by Thingiverse
Last crawled date: 3 years ago
This is my big P2020 3D printer. It took about 3 months to build in my spare time.
I already have an M3D (terrible printer) and a chinese i3 clone. I wanted a printer with the rigidity of the M3D and print quality better than the i3 and at a larger print volume. So i modeled the design after a mix between the CR-10 and the Lulzbot Taz 6.
Here is a video of it printing.https://youtu.be/w-Ai7Jbp3DQ
The printer Specs are as follows:
640mm wide
450mm tall
440mm deep
300x300x300mm build volume
12V 30A DC power supply
external heater module (for the bed)
E3D V6 hot end
Noctua fans
Geeetech GT2560
10x20mm drag chains
silicone jacketed wire where it counts
2020 80/20 extrusion frame (i dont recommend 80/20 t-slot, too narrow of an opening)
2020 v-slot extrusion (x and z axis) with mini v-slot wheels and plates
2060 v-slot extrusion (y axis) with normal large sized wheels and a universal plate
and tons of hardware!
I had no idea it would be so heavy, but it is quite solid. I can print with it on its side! I can also pick it up and move it around while it prints with no effect on print quality. One of the best parts, is that it is modular. I was thinking how cool it would be to build one with the frame rotated 90 degrees with the electronics in the bottom like an Ultimaker.
If you plan on making this, let me know if you want advice or have any questions about sourcing specific parts or hurdles to overcome. Like how I de-jacketed an Ethernet cable to use as longer wires for the fans and sensors for the print head. The wire in those cables meets the specs for most applications in the printers and lengths can be cut to size.
Let me know what you think!
Amazon link to the parts i sourced from there. I had prime so i took advantage of that "free" 2 day shipping.https://amazon.com/ideas/amzn1.account.AHUT6Q675Z5ONGJDFWMQDAFOFM2Q/2WAC2GFBEU8J9?ref=idea_share
I already have an M3D (terrible printer) and a chinese i3 clone. I wanted a printer with the rigidity of the M3D and print quality better than the i3 and at a larger print volume. So i modeled the design after a mix between the CR-10 and the Lulzbot Taz 6.
Here is a video of it printing.https://youtu.be/w-Ai7Jbp3DQ
The printer Specs are as follows:
640mm wide
450mm tall
440mm deep
300x300x300mm build volume
12V 30A DC power supply
external heater module (for the bed)
E3D V6 hot end
Noctua fans
Geeetech GT2560
10x20mm drag chains
silicone jacketed wire where it counts
2020 80/20 extrusion frame (i dont recommend 80/20 t-slot, too narrow of an opening)
2020 v-slot extrusion (x and z axis) with mini v-slot wheels and plates
2060 v-slot extrusion (y axis) with normal large sized wheels and a universal plate
and tons of hardware!
I had no idea it would be so heavy, but it is quite solid. I can print with it on its side! I can also pick it up and move it around while it prints with no effect on print quality. One of the best parts, is that it is modular. I was thinking how cool it would be to build one with the frame rotated 90 degrees with the electronics in the bottom like an Ultimaker.
If you plan on making this, let me know if you want advice or have any questions about sourcing specific parts or hurdles to overcome. Like how I de-jacketed an Ethernet cable to use as longer wires for the fans and sensors for the print head. The wire in those cables meets the specs for most applications in the printers and lengths can be cut to size.
Let me know what you think!
Amazon link to the parts i sourced from there. I had prime so i took advantage of that "free" 2 day shipping.https://amazon.com/ideas/amzn1.account.AHUT6Q675Z5ONGJDFWMQDAFOFM2Q/2WAC2GFBEU8J9?ref=idea_share
Similar models
thingiverse
free
2020 Extrusion Corner Cap by henryarnold
...rner through a slot in the extrusion. i wanted to protect that wiring so this cap slides over the extrusion and snaps into place.
thingiverse
free
V-Slot Cable/Wire Protector
...nel that fits in 40x40 extrusion v-slots. i recommend printing this in tpu and with only a single so it can squish into the slot.
thingiverse
free
2020 Cable Channel by chercus
...th nozzle diameter set to 0.5 or set extrusion multiplier of 1.25 so that you get some over extrusion. it is designed for this!!
thingiverse
free
Misumi 2020 aluminum extrusion wire cover by cdl1701
... are had to see in the photos that i took... which is what i was going for ;). you can see the wire coming out from behind them.
thingiverse
free
Ribbon Cable Clip - Raspberry Pi Camera - 2020 extrusion V-Slot
...thout needing any adhesive or nuts.
i use this on my ender 5 but it should work on any other v-slot extrusions (2020, 2040, etc).
thingiverse
free
2020 Cable Channel for inner corner by sourekv
...multiplier of 1.25 so that you get some over extrusion. it is designed for this!!
remix:
inner corner variant
cable entry variant
thingiverse
free
2020 2040 Cable clip by Namurei
...ful for organizing your cables on v-slot printers like ender, cr-10, tevo, geertech etc...
they can be printed from any material.
thingiverse
free
2020 cable guide (OpenSCAD) by David_J
...cognises the basic idea then let me know and i'll credit its designer.
they clip nicely onto motedis 20x20 profile extrusion.
thingiverse
free
V-Slot 40x20 Cable Clip
...rinter uses 40x20 extrusions, so i remixed this great cable clip and made it a little wider so it covers both slots of the 40x20.
thingiverse
free
Z Axis brace for 20mm T-Slot Extrusions by jprochazka
...r. this brace should work not only with this printer but most any printer built using 20x20 or 20x40 t-slot or v-slot extrutions.
Chromatophore
thingiverse
free
Redcat Rampage XB Gas to Electric Conversion parts by Chromatophore
...igned for a max6 esc, but insure you can zip tie whatever down to it. these require the use of the existing stock servo brackets.
thingiverse
free
E3D V6 hotend with BLTouch for Linear guide and 2020 Extrusion by Chromatophore
...for the extruder idler
mk7 extruder drive gear
m3 and m4 rubber washers
short length of ptfe tube
m6 pneumatic fitting (optional)
grabcad
free
The MyBoot™
...projected on the boot, it behaves just like the chromatophore on a cuttlefish when camouflaging onto a surface. low...
P2020
cg_trader
$10
Orac Decore P21 P201A P2020
...p2020
cg trader
orac decore p21 p201a p2020 3d model shape decoration, available in max, obj, fbx, ready for 3d animation and ot
cg_trader
$4
P2020 Pistol from Apex Legends
...legends
cg trader
3d asset p2020 pistol from apex legends pistol automatic, formats max, obj, fbx, ready for 3d animation and ot
grabcad
free
"Apex Legends" Hammond P2020
...eres a 3d model of the p2020 pistol item from the game apex legends.
this is not a real firearm and doesn't function as one.
cg_trader
free
P2020 from Apex Legends
...p2020 from apex legends
cg trader
this model is based on the game apex legends . textures include 1 set with 4 k textures
cg_trader
$5
P2020 Shadow Web Apex Legends Skin Pistol Prop 3D printing | 3D
...apex legends skin pistol prop 3d printing | 3d
cg trader
p2020 3d model from apex legends with shadow web skin for 3d printing.
clara_io
free
P2020 Skinny
...p2020 skinny
clara.io
3dwarehouse
free
Cylinder series P2020
... #polarteknik #proe_wildfire #solidedge #solidworks #sylinterisarja_p2020 #sylinterit #unigraphics #zylinder #zylinderserie_p2020
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.