Thingiverse
Overengineered reinforcements for IKEA Hejne rack by JiriRM
by Thingiverse
Last crawled date: 3 years, 4 months ago
I designed this solution to reinforce IKEA Hejne rack. All parts are printed with CPE or PETG filament with really thick shells (~8 perimeters) to get the strength. Bottom feet were printed with TPU filament and 100% infill.
For the assembly, screws M5x25 and M5x40 with M5 nuts are needed as well as countersunk wood screws 3x20 (for side braces) and 3x40 (For bottom braces).
Due to the fact that the rack has huge variation in dimensions, I designed two variants of side braces. Every shelf needs to be measured and the correct brace printed. Braces are designed for one side, for the other side, you need to mirror the models in your slicer.
For the assembly, screws M5x25 and M5x40 with M5 nuts are needed as well as countersunk wood screws 3x20 (for side braces) and 3x40 (For bottom braces).
Due to the fact that the rack has huge variation in dimensions, I designed two variants of side braces. Every shelf needs to be measured and the correct brace printed. Braces are designed for one side, for the other side, you need to mirror the models in your slicer.
Similar models
thingiverse
free
Ikea Hejne Filament Spool Holder
...ttached with m4 bolts, washers, and nuts. i'm sure for other applications you could just some button head screws and washers.
thingiverse
free
Ikea Hejne Food
... allow to adjust the bottom height. this can be useful to angle the shelf, if the floor is not flat.
it is developed on codeberg.
thingiverse
free
Wall Rack (Bottom/Base) for Six Pool Cues
...sign tops as i already have what i needed using rubber fishing rod holders and there are several designs for tops on thingiverse.
thingiverse
free
screw on IKEA Lack Filament Guide with storage holes for unused filaments by Hatchet86
...y securing your unused filament.
the guide is designed to fit in a 10 mm drillhole.
insert it from the bottom, screw on the top.
thingiverse
free
Hat shelf - extension for Ikea Portis rack by Harry_D60
...ejne" stands as shelves, maybe i'll use the holes in the future to fit something else onto it (seperators, or whatever).
thingiverse
free
Ikea Enclosure Braces (Lack Side Table) by Cool_Stuff
... quickly sketch up a brace for the ikea enclosure. if you are confused on how to assemble it, take the legs off the bottom table.
thingiverse
free
Ikea Hejne cap by bulu94
...s like a charm. and also straightforward in slicing/printing. infill off 25% percent is enough, even with the load of the shelve.
3dwarehouse
free
IKEA - HEJNE - 1 section,6 shelves
... section,6 shelves
3dwarehouse
ikea - hejne 1 module + 6 shelves (separate groups - can be rearranged) 780x310x1740 #ikea #hejne
3dwarehouse
free
Overhead Bin Rack
...the system is increased, all fasteners used are screws or simpson strong-tie lag screws. #cubby_hole #moveable #simpson_strongtie
thingiverse
free
Prusa MK2s MMU Filament Rack Stand Legs by electromechtro
...
the corner brace i removed the inside bracket to use the same screws.
i also plan on replacing the spiral wrap with mesh sleeve.
Jirirm
thingiverse
free
Simple Phone Stand by JiriRM
... for phone in landscape - standing upright (e.g. for a nightstand), shallow angle (on the workdesk) and a combination of the two.
thingiverse
free
3D Printed HEXA Earrings by JiriRM
...petg/cpe/abs, i chose black color. best results with smaller nozzle (0.25 mm) but it's possible to print with 0.4 mm as well.
thingiverse
free
Spaceplane Lamp by JiriRM
...inted with lots of supports facing up to get the same 3d printed structure as the the switch_back
light bulb ikea, length 200 mm.
thingiverse
free
Wavy Earrings - Vase mode by JiriRM
...elephant foot effect. in cura, you can play with these to compensate:
initial layer horizontal expansion
initial layer line width
thingiverse
free
Self Watering Planter by JiriRM
...olors to indicate the water level
printed in cpe/petg as solid, best to use cura arachne for slicing to get nice extrusion lines
thingiverse
free
Vase Mode Christmas Tree by JiriRM
...ee decoration, printed scaled to 40-50% looked good.
to hang it on the christmas tree you will need to attach a wire loop on top.
thingiverse
free
Super Nerdy Moiré Earrings by JiriRM
...form a moiré pattern, so every day the earrings can be set to a different pattern. best results when printed with white filament.
thingiverse
free
Bits and Pieces for 3DLab Print Planes by JiriRM
...he desired gap.
5-blade_center is hub for 5-blade propellers (spitfire, p51, etc.) with round hole to spin on an m4 threaded rod.
Hejne
thingiverse
free
Ikea Hejne Food
... allow to adjust the bottom height. this can be useful to angle the shelf, if the floor is not flat.
it is developed on codeberg.
thingiverse
free
IKEA - Hejne - Universal Support by denkyem
...ikea - hejne - universal support by denkyem
thingiverse
support to ikea hejne, to use any other shelf.
thingiverse
free
HEJNE IKEA Bookend Transformers by Gallareto55
...ngiverse
bookend for ikea hejne with autobot logo's
there is also a front 3d text for a better organization of the bookcase.
thingiverse
free
Ikea Hejne cap by bulu94
...s like a charm. and also straightforward in slicing/printing. infill off 25% percent is enough, even with the load of the shelve.
thingiverse
free
IKEA hejne post drilling guide by Denbukki
...ikea hejne post drilling guide by denbukki
thingiverse
a drilling guide to add more holes between the holes made by ikea.
thingiverse
free
Ikea Hejne Filament Spool Holder
...ttached with m4 bolts, washers, and nuts. i'm sure for other applications you could just some button head screws and washers.
thingiverse
free
Screwdriver Holder for IKEA HEJNE Shelves by fardog
...il the installation. worked fine as is though.
taper the screwdriver holes a bit, it might make them a bit more steady when held.
thingiverse
free
Ikea Shelf Playstation Eye Camera mount
...mount thingiverse playstation camera mount for a ikea shelf (https://www.ikea.com/us/en/p/hejneshelf-unit-softwood-s39031411/) with bolt and...
thingiverse
free
Hat shelf - extension for Ikea Portis rack by Harry_D60
...the 3d printed self-clamping supports, i've mounted 3 ikea "hejnequot; stands as shelves, maybe i'll use the holes in...
Overengineered
thingiverse
free
Laptop Stand (slightly overengineered) by rik_bovens
...laptop stand (slightly overengineered) by rik_bovens
thingiverse
laptop stand designed for a macbook pro 13'' (2015)
thingiverse
free
overengineered subwoofer damper by a69291954
...291954
thingiverse
.. see photo :)
required really good cooling, used petg for more flex.
filament ist petg silver from extrudr
thingiverse
free
overengineered toolarm for eggbot by mlueft
...de tool arm for the eggbot :-/
if your servo can't lift the tool. mount a counter weight at the backside of the extender_top.
thingiverse
free
Overengineered DIN 3 Rail by natalietrinh102
...dea why i spent so much time on this when i could've just bought one, but i guess i wanted to see how far i could go with it.
thingiverse
free
highly overengineered spool feeder for Fabrikator Mini V2 by pixelhaufen
...two.
sorry for the nc addition to the licence. since i modified the stl from qube3bot for the bearing there was no way around it.
thingiverse
free
The Overengineered eJuice Bottle Pourer by 3DChanh
...ng the clamp helps.
i get my bulk ejuice here: https://thevapemall.com/
video: https://www.youtube.com/watch?v=qo7qio08ccy
enjoy!
thingiverse
free
TOESH - Totally overengineered spool holder for CraftBot Printers by AndreasALu
...nner diameter >17mm or whatever fits on your ball bearing) and a plastic pipe (length depending on the width of your printer).
thingiverse
free
TOESH - Totally overengineered spool holder for CraftBot Printers by AndreasALu
...nner diameter >17mm or whatever fits on your ball bearing) and a plastic pipe (length depending on the width of your printer).
thingiverse
free
TOESH - Totally overengineered spool holder for CraftBot Printers by AndreasALu
...nner diameter >17mm or whatever fits on your ball bearing) and a plastic pipe (length depending on the width of your printer).
thingiverse
free
The overengineered box transport solution by Chukman
...ighty first, then glue then assemble the next piece: the tightened bolts secure the box parts in place whilst the glue is drying.
Reinforcements
3d_export
$6
reinforced slabs
...reinforced slabs
3dexport
3d model created by blender 2.90 render eevee.
turbosquid
$17
Reinforced Wooden Crate
... 3d model reinforced wooden crate for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1263805)
3d_ocean
$6
Construction Site Reinforcement
...uctions. this is a low polygonal model, easy to animate. - poly count: 778 - formats: max /obj /fbx/3ds/dxf - high detail was ...
3d_export
free
tmt reinforced steel bar
...orced steel bar
3dexport
tmt reinforced steel bar https://sketchfab.com/3d-models/tmt-bar--anil-5e940bd6b61d46aeb22346f1886d0597
3d_export
$15
Reinforced concrete foundation 3D Model
...reinforced concrete foundation 3d model
3dexport
reinforced concrete foundation 3d model bu1266 74497 3dexport
turbosquid
$750
THE ES1d2O HOUSE (reinforced concrete)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Retro Gaming - Reinforced Door
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$4
Wire Reinforced Glass
...ing is seamless, as you can see in the preview. the largest images are 2048×2048 pixels. also included are 1024, 512 and 256 p...
turbosquid
$10
Fibre-reinforced plastic rebar factory
... plastic rebar factory for download as mat, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1297054)
turbosquid
$13
Medieval Noble's Reinforced Door (8k)
...reinforced door (8k) for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1473809)
Ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , стеллаж
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
кухня ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
осторожно, тяжелая модель
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
5 зеркал от ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , бойа
ikea светильник потолочный
3ddd
$1
IKEA
...ikea
3ddd
ikea , барный
bar stool ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , зубная щетка , косметика
ikea
3ddd
free
IKEA
...ikea
3ddd
ikea , трюмо
дамский столик ikea.
3ddd
$1
IKEA
...3ddd
ps , декоративный набор , ikea
ikea decor
3ddd
$1
Ikea
...ikea
3ddd
ikea , lagra
модель лампы от ikea
Rack
archibase_planet
free
Rack
...ack
archibase planet
rack paper rack rack for paper
rack 6 office n060914 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Rack
...ack
archibase planet
rack paper rack rack for paper
rack 3 office n060914 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Rack
...ack
archibase planet
rack paper rack rack for paper
rack 5 office n060914 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Rack
...ack
archibase planet
rack paper rack rack for paper
rack 7 office n060914 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Rack
...for magazines rack for notebooks notebooks notebook
rack notebook n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Rack
...rack
archibase planet
rack umbrella umbrella rack
rack n180811 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Rack
...rack
archibase planet
rack book rack stand
rack - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Rack
...rack
archibase planet
rack rack for glasses
rack 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Rack
...rack
archibase planet
rack rack for glasses
rack 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
free
rack
...rack
3dexport
rack