Over Door Towel Bar by Indian_Villager 3d model
3dmdb logo
Thingiverse
Over Door Towel Bar by Indian_Villager

Over Door Towel Bar by Indian_Villager

by Thingiverse
Last crawled date: 3 years, 3 months ago
UPDATE 10/30/2020: I have added an additional version of the hanger that is made thinner (1.5mm) to accommodate doors with smaller clearance to door frames. The original part is still available for those who would like a stronger part (3.5mm thick).
Over Door Towel Bar to dry your towels better.
The part uses 3/4" PVC pipe as the towel bar. Both SCH40 and SDR21 will work as they share the same outer diameter.
If you are feeling fancy there are printable friction fit Finials to pretty up the ends of the towel bar. There are separate files for the Finials if you are using SCH40 or SDR21 as the inner diameter of these pipes are different.
If you found this useful toss up a like. If you care to share let the people see your make.
Happy Printing.

Tags