Thingiverse
Osciliscope Probe Readout Adapter by dteck
by Thingiverse
Last crawled date: 3 years ago
I recently bought a used Tektronics TDS320. But the original probes cost almost as much as the machine. So i picked up a couple of cheap 100MHz probes off ebay. Problem is that the p6109b probes that are recommended for use with the Oscilloscope have a special pin on the BNC connector that tells the scope its attenuation level (1, 10, 100x, etc) and the cheap Chinese probes obviously don't.
Looking into how the pin tells the scope its level (with some help from the EEVBlog forum) I found that it is just a resistor between the BNC ground and the ring around the BNC on the scope itself.
So I made this to hold a through hole resistor next to the BNC. Where it friction fits to hold the plastic and one lead of the resistor in place. while using the other resistor lead to contact the ring on the scope.
I'm including the sketchup file for anyone who may want to modify this design.
Looking into how the pin tells the scope its level (with some help from the EEVBlog forum) I found that it is just a resistor between the BNC ground and the ring around the BNC on the scope itself.
So I made this to hold a through hole resistor next to the BNC. Where it friction fits to hold the plastic and one lead of the resistor in place. while using the other resistor lead to contact the ring on the scope.
I'm including the sketchup file for anyone who may want to modify this design.
Similar models
thingiverse
free
A better Tektronix Probe Sensor Adapter by opjose
...om one scope to another
• a bit more “elegant” and professional looking than other solutions
full instructions included in pdf.
thingiverse
free
Multimeter Probe Holder by rockpaperlizardspock
...ay resistors to measure, made this to hold the dmm probes so i can just lay the resistors over the probes for quick measurements.
thingiverse
free
Desk shelf mount hook by jrussell
...elves. i needed hooks to hang leads and oscope probes. so i made these. i hope they'll be useful to someone else too someday.
thingiverse
free
Scope probe organizer
...r in which you can place them.
the openscad files are also here, i made them parametric so you can change dimensions/probe count.
thingiverse
free
Cheap multimeter holder (model UT10A) by tkbletsc
...ine for getting a running amplitude measurement of a simple ac signal, and it's a lot cheaper than getting a digital scope...
thingiverse
free
Scope Probe Desk Clamp by jostsalathe
...ip in 4 oscilloscope probes. i designed this to hold agilent n2862b probes but i guess the shape of scope probes is quite common.
thingiverse
free
Oscilloscope cable tidy by AndyGadget
...ontain the probe leads. use strong double sided tape or contact adhesive to attach.
the photo also shows my extended scope feet.
thingiverse
free
Oscilloscope Probe Storage
...all accessory tray. i'm using the tray to hold my min-grabber clips and other small accessories.
i hope you find this useful.
thingiverse
free
CRO probe holder for portable oscilloscope by AndrewFromOz
... debugging, i remove the cro probe hooks and lose them. so this holder plugs into the usb socket and holds them while not in use.
thingiverse
free
Oscilloscope probe clamp by Gopiballava
...what you need.
i use this with a wire clip on my scope probe.
check the dimensions of your scope probe. my hp/agilent probes fit.
Dteck
thingiverse
free
Arduino Mega Base by dteck
... sits flush with the top and the raised boxes provide crush support
the sketchup file is included if you wants to make changes.
thingiverse
free
Winterfell 2.0 by dteck
... dropped it into sketchup to clean up some of gemoetry. and while i was at it i added the godswood that he mentioned leaving out.
thingiverse
free
Kaleidoscope Eyes Diffuser and Battery Holder by dteck
...pe eyes project that i modified. its a light diffuser for in front of and behind the glass lens as well as a battery pack holder.
thingiverse
free
Arduino Uno R3 Base by dteck
... on both sides so it can be attached to a breadboard.
i have also included the sketchp file in case you want to change anythng
thingiverse
free
Knockoff Arduino Pro Mini Clip by dteck
...n wings for either double sided tape or screw mounting.
the sketchup file is also included in case you want to change anything.
thingiverse
free
DW660 Shapeoko Mount by dteck
...is included for any changes you may want to make
for the original in dxf format seehttp://www.shapeoko.com/wiki/index.php/dw660
thingiverse
free
Lawsy MK4 Peek Retainer by dteck
...reated a bit of a loose fit. the peek would actually hop up and down while printing. so this is a clip to hold the peek in place.
thingiverse
free
Cell Phone and Headphone Wall Holder by dteck
...to the wall next to my bed and the only thing i added was a bit of the nonskid rubber to the top to help keep the phone in place.
thingiverse
free
Mosfet Breakout Board Clip by dteck
...e back of the machine with some double sided tape.
i have included the sketchup model in case you want to modify it in any way.
thingiverse
free
Knockoff Arduino Pro Mini Breadboard Base by dteck
...the knockoff mini to a breadboard using the notched sides.
the sketchup model is included in case you want to change anything.
Readout
3d_export
$30
Digital Caliper 3D Model
...digital caliper 3d model 3dexport digital caliper measure measuring readout accuracy digit scale gauge precision metalworking mechanical engineering gunsmithing...
3d_export
$9
marantz sr7013
...emission shader with a light blue hue and lastly "readoutquot; needs an emission shader in...
3d_export
$30
sephora bridge in obj and fbx format
...the last 2340`s.<br>three sit-down consoles behind the captain displayed readout for the engineering, communication, and science departments.<br>unlike later bridge...
thingiverse
free
Water Meter camera readout holder
...r meter camera readout holder
thingiverse
complete project is described here https://github.com/luc3as/watermeter-readout-camera
thingiverse
free
LR44 Battery Cover for Planer Digital Readout by tayarimoto
... other devices that use lr44 batteries, such as calipers.
the fitment is tight, by design, so it can't fall off incidentally.
thingiverse
free
3d Printer Filament Length Readout
... this, maybe just an idea to do something simular would be good.
ps here is a link to my 5v to 3v3 volt converter
cheers
kisssys
thingiverse
free
Hobby Lathe Digital Readout by Kisssys
...t off and do the other 2 screws. it's plastic so go easy. just takes a little turn to snug it up on the rail.
cheers
kissys
thingiverse
free
sports bracelet for Abbott Freestyle Libre by wassi
...to carry the abbott freestyle libre flash glucose monitoring readout device like a clock during sports activities like running...
thingiverse
free
Case for connected Temperature/Humidity device
...a case for my connected temperature/humidity sensor with lcd readout build. more details of the build can be found...
Probe
turbosquid
$25
Probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Mars probe space space exploration lunar probe
...be space space exploration lunar probe for download as max on turbosquid: 3d models for games, architecture, videos. (1630876)
turbosquid
$35
Space Probe
...osquid
royalty free 3d model space probe for download as c4d on turbosquid: 3d models for games, architecture, videos. (1571168)
turbosquid
$15
Space Probe
...osquid
royalty free 3d model space probe for download as obj on turbosquid: 3d models for games, architecture, videos. (1314864)
turbosquid
$25
Robot Probe
...y free 3d model robot probe for download as fbx, obj, and dae on turbosquid: 3d models for games, architecture, videos. (1537490)
turbosquid
$1
Dental Probe
...e 3d model dental probe for download as ma, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1312400)
turbosquid
$60
Police Probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Dental Probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Space probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Cassini Probe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Adapter
3d_export
$10
Adapter 3D Model
...adapter 3d model
3dexport
adapter
adapter 3d model mur 20260 3dexport
archive3d
free
Adapter socket 3D Model
...dapter socket adapter
adapter socket n090211 - 3d model (*.3ds) for interior 3d visualization.
turbosquid
$400
cell adaptation
...
royalty free 3d model cell adaptation for download as blend on turbosquid: 3d models for games, architecture, videos. (1701655)
archive3d
free
Adapter 3D Model
...ups pc equipment
adapter extron n180813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
usb adapter
...royalty free 3d model usb adapter for download as ige and stl on turbosquid: 3d models for games, architecture, videos. (1582234)
turbosquid
$15
Power adapter
...free 3d model power adapter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1510024)
turbosquid
$8
USB adapter
...e 3d model usb adapter for download as max, fbx, obj, and dwg on turbosquid: 3d models for games, architecture, videos. (1713542)
turbosquid
$30
adapter.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Nokia Adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Universal adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.