Thingiverse
Ortur Laser Master 2 Wire Support Guide (Print or Lasercut) by senigami
by Thingiverse
Last crawled date: 3 years, 1 month ago
Included designs for either 3D Printed or Lasercutting your own.
Installation is the same for either part.
I purchased an Ortur Laser Master 2 and found that the cables going from the laser module to the side of the machine kept getting stuck in the side and would either limit movement or get in the way of the limit switch and messing up homing. I tried another solution from Thingiverse only to find that Ortur must have enhanced the acrylic and the printed part would not fit.
I didn't want to go out and buy screws to attach something that should be simple so I resorted to designing my own part from scratch. I measured the black acrylic piece that fits behind the laser head and made a part that nicely fits over that. As a bonus, this uses very little filament and should print in about 30 min.
Additional Parts Needed:
3 small zip ties
Assembly:
Place part behind the black acrylic piece next to the laser head.
Secure in place using 2 of the zip ties.
Bring the laser power cord over the top of the support beam, this reduces stress and gives stability to this cable.
Using the 3rd zip tie secure the cords to the top end of the printed piece. If you have air assist you can also include the hose, no need to zip this too tightly, as long as it is supported you are good.
Now you can try moving your laser head to the side and you will see that the cords easily clear the edge with no more issues.
Disclaimer: This item is free to make for personal use but may not be resold without permission. Those who have obtained permission will be listed here.
Installation is the same for either part.
I purchased an Ortur Laser Master 2 and found that the cables going from the laser module to the side of the machine kept getting stuck in the side and would either limit movement or get in the way of the limit switch and messing up homing. I tried another solution from Thingiverse only to find that Ortur must have enhanced the acrylic and the printed part would not fit.
I didn't want to go out and buy screws to attach something that should be simple so I resorted to designing my own part from scratch. I measured the black acrylic piece that fits behind the laser head and made a part that nicely fits over that. As a bonus, this uses very little filament and should print in about 30 min.
Additional Parts Needed:
3 small zip ties
Assembly:
Place part behind the black acrylic piece next to the laser head.
Secure in place using 2 of the zip ties.
Bring the laser power cord over the top of the support beam, this reduces stress and gives stability to this cable.
Using the 3rd zip tie secure the cords to the top end of the printed piece. If you have air assist you can also include the hose, no need to zip this too tightly, as long as it is supported you are good.
Now you can try moving your laser head to the side and you will see that the cords easily clear the edge with no more issues.
Disclaimer: This item is free to make for personal use but may not be resold without permission. Those who have obtained permission will be listed here.
Similar models
thingiverse
free
Ortur Laser Master Cable Guide by pachinko9
... had zero issues with the cable since installing.
this print does not require supports. mine is printed on an ender 3 using pla.
thingiverse
free
Ortur laser side by johnboyjr
...tra one for the side with out the extra holes.
i cracked mine and printed this and it matches up so you can just replace one side
thingiverse
free
ORTUR Laser Master 2 Y-Axis Clip by smcneece
...ing and should help keep the laser more accurate.
if you end up using it, give it a like, it will help other ortur peeps find it!
thingiverse
free
Ortur LM2 Laser Shield and Air Assist by adeelarshad1987
...hardware of the laser. also drilled holes on back piece to mount it to the laser with small m3 bolts. used superglue to assemble.
thingiverse
free
Corner cable holder by IslandDog
...d table tape will also work. i also put holes in the sides where you can secure the cables using zip ties for a more secure hold.
grabcad
free
Foldable feet for Ortur Laser Master 3
...ocket head bolts and nuts.
printed in pla
https://ortur.net/en-gb/products/ortur-foldable-feet-for-laser-master-3-series-fft1-0
thingiverse
free
3mm Former Wire Support Guide
...ide for convenience). then secure you wiring using small zip ties, grooves in the support can be used to reduce zip tie slipping.
thingiverse
free
Ortur Laser Master Air Support Unit - fix by DeKamme
...caused a layer to appear right in the place the laser and air should pass.
i connected this seam, it seems to render correct now.
thingiverse
free
Ortur Laser Master 2 20W Fixed Focus air assist by tk-422
...quot;
i also added an air hose guide.
i updated my laser module to a 40w pro chinese model and it fits as well as the ortur one.
cg_trader
free
Ortur Laser Master 2 Air Assist for Adjuster Head
...de the print which will allow to air to be compressed more and pushed out stronger, the bottom support can then easily be removed
Senigami
thingiverse
free
Hose Clip by senigami
...ingiverse
i needed a way to hang the hose for spraying so i threw this together, fits a simple lanyard clip or whatever you like
thingiverse
free
Kindle Cover with Bumpers by senigami
...ngiverse
i really liked the kindle cover that fromfo designed but i wanted a little more drop protection so i added some bumpers
thingiverse
free
Canvas Picture Frame Hanger by senigami
...dn't want to damage the small frame so i made this hanger hook that slides under the back canvas and then will hang on a nail
thingiverse
free
Ender 5 Simple Raspberry Pi Cam, No Screws Needed by senigami
... these clips fit any other frames. if anyone can verify it fitting on any other frame let me know and i'll update the notes.
thingiverse
free
Universal Air Assist for Diode Laser Cutter / Engraver by senigami
... free to make for personal use but may not be resold without permission. those who have obtained permission will be listed here.
thingiverse
free
Pi camera holder by lwkalis
...parts. support only needed with long piece. remix from senigami ...
Ortur
3d_export
$15
engraver ortur laser master 2
...engraver ortur laser master 2
3dexport
thingiverse
free
Ortur YYR - supports by Torcini
...s a replacement for ortur yrr (y-rotary roller) support.
this simplify the change of the roller position with just a screwdriver.
thingiverse
free
ORTUR Obsidian - fan grill by FiveNights
...ortur obsidian - fan grill by fivenights
thingiverse
enjoy...
ortur obsidian review https://youtu.be/lp0_ngbffi0
thingiverse
free
Rueda de enfoque laser Ortur
...rueda de enfoque laser ortur
thingiverse
rueda de enfoque para laser ortur 15w
thingiverse
free
Belt Tensioner - Ortur Laser V1 by damsonymous
...rtur laser v1 by damsonymous
thingiverse
belt tensioner for ortur laser master v1
tendeur de courroie pour ortur laser master v1
thingiverse
free
Ortur leg extension Camels by clarkjo03
...ortur leg extension camels by clarkjo03
thingiverse
stackable feet for my ortur laser engraver.
printed on my photon s
thingiverse
free
Ortur-nut-holder by liquidd
...ou adjust the rollers without having to have a wrench. it holds the backsides of the nut so that you can use just a screwdriver.
thingiverse
free
Filament Guide Ortur 4
...filament guide ortur 4
thingiverse
guide filament for ortur4
thingiverse
free
Bracket for Ortur V1 by Nekraus
...ps://www.thingiverse.com/thing:4222420 to adapt it for the ortur to get two fans.
next steps :
-add touch-mi support
-e3d volcano
thingiverse
free
Ortur LM2 Wire holder head by LoZa
...m2 wire holder head by loza
thingiverse
wire holder for the head of the laser ortur lm2. it help you to fixed the wire correctly
Lasercut
turbosquid
$7
Spacewars lasercut
...ars lasercut for download as max, ige, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1369305)
turbosquid
$7
Spacewars lasercut
...ars lasercut for download as max, ige, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1369302)
turbosquid
$7
Girl logo lasercut
...irl logo lasercut for download as max, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1348997)
turbosquid
$7
Girl logo lasercut
...irl logo lasercut for download as max, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1348991)
turbosquid
$7
Spartan logo lasercut
...ogo lasercut for download as max, obj, fbx, dwg, stl, and ipt on turbosquid: 3d models for games, architecture, videos. (1382336)
turbosquid
$7
Spartan logo lasercut
...ogo lasercut for download as max, ige, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1385470)
turbosquid
$7
Spartan logo lasercut
...ogo lasercut for download as max, ige, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1382337)
turbosquid
$7
Girl logo lasercut
...ogo lasercut for download as max, ige, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1348987)
turbosquid
$7
Spartan logo lasercut
...ogo lasercut for download as max, ige, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1369231)
turbosquid
$7
Girl logo lasercut
...ogo lasercut for download as max, ige, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1349005)
Master
3ddd
$1
Master
...master
3ddd
besana , master
фабрика: besana
master
размер: 80х60х80
design_connected
$20
Masters
...photo-realistic 3d models of the kartell masters chair by philippe starck for 3d architectural and interior design presentations.
3ddd
$1
Masters
...ка на производительяhttp://www.designboom.com/design/philippe-starck-masters-chair-for-kartell-at-milan-design-week-09/
3d_export
$5
master roshi
...master roshi
3dexport
master roshi 3d model good quality for animation
design_connected
$18
Masters Stool
...masters stool
designconnected
kartell masters stool computer generated 3d model. designed by starck, philippe.
3ddd
free
Key Master
...key master
3ddd
игровой автомат , key master
д 950 / ш 950 / в 1850
3ddd
$1
Стул: Masters Chair
... kartell
стул: masters chair
коллекция: masters
бренд: kartell
страна: италия
размеры, см: 83x54x54; высота сиденья – 47.
3d_export
$5
master bedroom
...master bedroom
3dexport
zhu design<br>a modern tropical inspired master bedroom for your model
3ddd
$1
kartel masters
...el masters
3ddd
kartel , masters
в архиве присутствует fbx и модель в 2011 версии макса.
turbosquid
$150
Master Bedroom
...osquid
royalty free 3d model master bedroom for download as on turbosquid: 3d models for games, architecture, videos. (1329485)
Laser
3d_export
$5
laser
...laser
3dexport
a 3d laser
3d_export
free
cnc 3dp laser nozzle for 2w laser opt lasers
...logy that gave birth to cutting and engraving laser heads this laser nozzle was designed for, read the article in the link below:
3d_export
free
cnc laser mount opt lasers
...eive the engraving and cutting laser heads this cnc machine laser mount was designed for, read the article on the following page:
turbosquid
$20
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
laser sword
...laser sword
3dexport
it is a blue laser sword with a metal frame
3d_ocean
$19
Laser Turret
...be used in any sf type of game, especially in tower defense games. - laser turret: 3025 polygons - props: 270 polygons - textu...
3d_export
free
workbee cnc laser mount for opt lasers
...the specifications of engraving and cutting laser heads this mount was designed for, please take a look at the following website:
3d_export
free
shapeoko cnc laser mount for opt lasers
...ind out the opportunities that adding a cutting and engraving laser head to your cnc can bring, take a look at the website below:
Guide
turbosquid
$15
Guide drawer
...squid
royalty free 3d model guide drawer for download as dwg on turbosquid: 3d models for games, architecture, videos. (1261387)
turbosquid
$1
Road Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Guide-board 3D Model
...ion sign guide sign
guide-board n170112 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
turbosquid
$2
soap cutter guide
...
royalty free 3d model soap cutter guide for download as stl on turbosquid: 3d models for games, architecture, videos. (1694030)
turbosquid
$15
Blind Guiding tiles
...free 3d model blind guiding tiles for download as 3dm and dae on turbosquid: 3d models for games, architecture, videos. (1156598)
turbosquid
$69
Japanese Tour Guide
...d model japanese tour guide for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1614288)
turbosquid
$10
CNC Linear Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Road Guide 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Tank Model Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$9
Guide Books 3
...sformed separately and each have unique texture map on front and back cover. to make your work easier this model comes in thre...
Wire
design_connected
$11
Wired
...wired
designconnected
wired computer generated 3d model.
design_connected
$11
Wires
...wires
designconnected
wires computer generated 3d model.
design_connected
$11
Wire
...wire
designconnected
ronda design wire computer generated 3d model. designed by roccadadria, luca.
3d_export
$5
wire
...wire
3dexport
wire 180x180 cm arhive rar 3dmax2019. obj. fbx. mat corona
turbosquid
$2
HDMI wire
... 3d model hdmi wire for download as wire, wire, fbx, and wire on turbosquid: 3d models for games, architecture, videos. (1644937)
turbosquid
free
wires
...bosquid
free 3d model wires for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1214233)
3ddd
$1
Wire chair
...wire chair
3ddd
wire chair
turbosquid
$10
wires
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Wire
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
wire stripper
...wire stripper
3dexport
wire stripper 5 in 1
Support
turbosquid
$5
Support
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
Support 3D Model
...support 3d model
3dexport
support cantilever console
support 3d model tasal 73900 3dexport
3d_export
$5
phone support
...phone support
3dexport
phone
turbosquid
$12
Support bars
...squid
royalty free 3d model support bars for download as max on turbosquid: 3d models for games, architecture, videos. (1411542)
turbosquid
$8
support weights
...id
royalty free 3d model support weights for download as max on turbosquid: 3d models for games, architecture, videos. (1411538)
turbosquid
$2
Support for flowers
...royalty free 3d model support for flowers for download as max on turbosquid: 3d models for games, architecture, videos. (1463543)
turbosquid
$2
headphone support
...royalty free 3d model headphone support for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1357583)
turbosquid
$14
Flower Support
...alty free 3d model flower support for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1497066)
turbosquid
$5
serum support
...yalty free 3d model serum support for download as c4d and obj on turbosquid: 3d models for games, architecture, videos. (1551267)
3d_export
$10
spyro joystick support
...spyro joystick support
3dexport
joystick support of spyro dragon
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
design_connected
$27
...print
designconnected
moroso print computer generated 3d model. designed by wanders, marcel.
3ddd
free
Eichholtz Prints
...- eichholtz print central station i
13 - eichholtz print central station ii
14 - eichholtz print marisa
15 - eichholtz print tish
3ddd
$1
Eichholtz Prints
...print abstract - set of 2
10 - eichholtz print orange abstract
11 - eichholtz print buddha right
12 - eichholtz print buddha left
turbosquid
$1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Eichholtz Prints
...of 4
2 - print dunbar 2 set of 4
3 - print guadeloupe 1 set of 4
4 - print guadeloupe 2 set of 4
5 - print giles
6 - print trett
3ddd
$1
Eichholtz Prints
...nt tutti frutti
3 - eichholtz prints watson - set of 2
4 - eichholtz prints antique nautilus - set of 2
5 - eichholtz print tiara
3d_export
$5
Monster for printing
...monster for printing
3dexport
monster 3d model printing
3ddd
free
printed rug
...printed rug
3ddd
ковер
very creative printed rug
3ddd
free
Eichholtz Prints
...иал: бумага
габариты (вхш): 72 x 62 см
описание: print sweetmeat - постер в деревянной раме.
3 - prints varsity set of 2
арти
3ddd
free
Art Print Posters
...art print posters
3ddd
прованс
art print posters by patrician prints