Thingiverse
Orion XT8 Dobsonian Telescope GoTo Modification by goose117
by Thingiverse
Last crawled date: 4 years, 1 month ago
Automate your base level Orion Dobsonian Telescope using 3D Printed Parts, Belts, and motors.
See Bill of Material for a list of parts. This list is not completely comprehensive, but hits the major components.
The Electronics consists of a Print-R-Board Rev F5. You will need to reprogram it with the supplied Hex file.
Motors connect to X and Y (X is Azimuth, Y is elevation). You may need to experiment with connector orientation to get the telescope directions correct.
More Information available upon request. Still a WIP
See Bill of Material for a list of parts. This list is not completely comprehensive, but hits the major components.
The Electronics consists of a Print-R-Board Rev F5. You will need to reprogram it with the supplied Hex file.
Motors connect to X and Y (X is Azimuth, Y is elevation). You may need to experiment with connector orientation to get the telescope directions correct.
More Information available upon request. Still a WIP