Thingiverse
Oreo Cookie Memory Chess Game by karlides
by Thingiverse
Last crawled date: 5 years, 8 months ago
This game is fun for all ages to adult. For young kids it develops memory and fine motor skill.
Game Instructions:
1.Place all pawns randomly on the chessboard upside down.
2.Take a few seconds to memorize where the colors are placed on the chessboard.
3.Throw the dice and find out which color to look for.
4.Pick as many identical colored pawns as you can on the chessboard (4 per color)
Printing and Assembly Tips:
Printed at .2 layer height, 20% infill, no supports
Cookies: 2, black
Inside Filling: 1, while
Outside Filling: 1, white
Pawns: 24, white
Color Pegs: 24 , pick 6 colors (start with black, then switch to color after 50% printed)
Die:1, pick a peg color (use same thickness for walls and top/bottom)
Die Inserts:5, print the other 5 peg colors
Note: When printing the Color Pegs, start with black for about 50% of the print, then switch to whatever color filaments you want to match your die. The reason you want half of the peg to be black is so you can't peek and see it while it's inserted into the oreo cookie.
I super glued everything together with clamps, and used a tiny bit of waterproof grease to lube the threads so the container opens and closes nicely.
Making the die is fun. It's the first die I've made that rolls really nicely. Make the die itself, one of your 6 colors, then make the inserts the other 5 colors. Print and glue, and clamp.
Game Instructions:
1.Place all pawns randomly on the chessboard upside down.
2.Take a few seconds to memorize where the colors are placed on the chessboard.
3.Throw the dice and find out which color to look for.
4.Pick as many identical colored pawns as you can on the chessboard (4 per color)
Printing and Assembly Tips:
Printed at .2 layer height, 20% infill, no supports
Cookies: 2, black
Inside Filling: 1, while
Outside Filling: 1, white
Pawns: 24, white
Color Pegs: 24 , pick 6 colors (start with black, then switch to color after 50% printed)
Die:1, pick a peg color (use same thickness for walls and top/bottom)
Die Inserts:5, print the other 5 peg colors
Note: When printing the Color Pegs, start with black for about 50% of the print, then switch to whatever color filaments you want to match your die. The reason you want half of the peg to be black is so you can't peek and see it while it's inserted into the oreo cookie.
I super glued everything together with clamps, and used a tiny bit of waterproof grease to lube the threads so the container opens and closes nicely.
Making the die is fun. It's the first die I've made that rolls really nicely. Make the die itself, one of your 6 colors, then make the inserts the other 5 colors. Print and glue, and clamp.