Thingiverse
Optional Spinner with Spin-Mark by konchan77
by Thingiverse
Last crawled date: 4 years, 2 months ago
Spinner with Spin-Mark
This is an optional spinner with Spin-Mark for "Jet Engine, Geared Turbofan (GTF) (thing: 2462343)".https://www.thingiverse.com/thing:2462343
Printer setting (Recommendation) (used PLA):
Spinner body (Fan-Spinner201wsCW.stl) = infill: 100%, Layer Height: 0.2mm, No support
Spin Mark (Fan-Spinner202x095CW.stl) = infill: 100%, Layer Height: 0.1mm, No support
Post printing:
Gluing is necessary to keep "Mark" in position.
This method is still under consideration.
This is an optional spinner with Spin-Mark for "Jet Engine, Geared Turbofan (GTF) (thing: 2462343)".https://www.thingiverse.com/thing:2462343
Printer setting (Recommendation) (used PLA):
Spinner body (Fan-Spinner201wsCW.stl) = infill: 100%, Layer Height: 0.2mm, No support
Spin Mark (Fan-Spinner202x095CW.stl) = infill: 100%, Layer Height: 0.1mm, No support
Post printing:
Gluing is necessary to keep "Mark" in position.
This method is still under consideration.