Thingiverse
Optimal Heatbed Level System (OHLS) by Alejanson
by Thingiverse
Last crawled date: 3 years, 1 month ago
This Thing is for an optimized bed leveling with thermal barrier.
Description
The Peek cylinder serves as a thermal barrier to prevent the heat from the heat from the heating bed into the printing table. Because the two screws are screwed into the cylinder, they do not have a direct transition to one another, and the heat is hardly transmitted through the pekk because it has a very poor thermal conductivity. At the same time, however, the peek is very heat-resistant and the temperatures of the heating bed can be very well tolerated.
The silicone damper is used to adjust the pressure bed and, in combination with the Peek part, provides a more stable structure than would be the case with a spring. In addition, the silicone does not have any direct contact with the heating bed due to the peek, which is why it is not so quickly degraded by the influence of the temperature and becomes porous.
The screws can be selected according to the circumstances. Why this system can be used with almost every printer.
Parts
4st Peek Cylinder 12mm*8mm and M3 thread insite
4st Silikon damper (Make them with the mold)
4st M3 Screws of your choice for the heatbed
4st m3 Screws of your choice for the table and adjusting
So have fun with the post-build and if you have any questions, I will gladly answer them.http://www.3d-druck-community.de/thread-17654.html
Description
The Peek cylinder serves as a thermal barrier to prevent the heat from the heat from the heating bed into the printing table. Because the two screws are screwed into the cylinder, they do not have a direct transition to one another, and the heat is hardly transmitted through the pekk because it has a very poor thermal conductivity. At the same time, however, the peek is very heat-resistant and the temperatures of the heating bed can be very well tolerated.
The silicone damper is used to adjust the pressure bed and, in combination with the Peek part, provides a more stable structure than would be the case with a spring. In addition, the silicone does not have any direct contact with the heating bed due to the peek, which is why it is not so quickly degraded by the influence of the temperature and becomes porous.
The screws can be selected according to the circumstances. Why this system can be used with almost every printer.
Parts
4st Peek Cylinder 12mm*8mm and M3 thread insite
4st Silikon damper (Make them with the mold)
4st M3 Screws of your choice for the heatbed
4st m3 Screws of your choice for the table and adjusting
So have fun with the post-build and if you have any questions, I will gladly answer them.http://www.3d-druck-community.de/thread-17654.html
Similar models
thingiverse
free
Universal silicon damper by seaspotter
... 4 dampers with your prefered silicone to the top and enjoy your new heat bed dampers which are a way better than normal springs.
thingiverse
free
Silicone Damper Mold Heatbed by Hackbert
... you can change it in the slicer.
the oblong is for m3-m4 screws.
one damper weight ca. 7,8 gramm.
it works fine with a filabase.
thingiverse
free
Creality CR-10 Silicone Damper mold by bAD_kLOPFER
...s will be between damper and heatbed. if you are anxious you can cut the damper with a knife to provide a channel for the cables.
thingiverse
free
DaVinci 1.0 PRO_Damper Mold by CSD_Salzburg
...
i changed the springs under the heatbed with these silicone dampers.
screw it together with five m3 screws and three m4 screws.
thingiverse
free
[Heated Scr3w Duo] - Heatbed leveler by mr2clean
...n add-on to m3 screw that holds the heated bed.
it has the option to use two m3 nuts so not to lose tention.
license, beerware :)
thingiverse
free
Mold for Silicone Printbed Dampers for Geeetech A10
...derneath the heatbed. makes the printing bed much more stable.
additional parts needed: 4 bolts m3 x 30 mm, 4 nuts m3, 4 washers
thingiverse
free
Heatbed adjustment wheel for Tevo Tarantula by kbartelds
...as turned. i made this for tevo tarantula but it can also used for other printers that have a m3 screw for adjusting the heatbed.
thingiverse
free
bed level adjuster by 3DMasteer
...ling is very very easy for me, this is one of the best upgrade that i did to my printer. you will have to use a m3 nut with this.
thingiverse
free
For printrbot thermal sensor mount by schrotti
...erature of the is is now better.
if you want to heat the bed over 85 c you can put a 1 mm thick silicon between mount and sensor.
thingiverse
free
Anycubic i3 Mega Bed Handle / Heatbed Griff *Remix for Silicon Damper* by henniero
...nual and credits to stonefpv.
i remixed the fixtures (left and right) to fit with the 16mm silicon dampers i use with my heatbed.
Alejanson
thingiverse
free
Merlin Hotend by Alejanson
...merlin hotend by alejanson
thingiverse
this is a 1:1 drawing of the classic merlin hotend.
thingiverse
free
CTC/Flashforge Front Panel by Alejanson
...ctc/flashforge front panel by alejanson
thingiverse
it's a combined front panel
thingiverse
free
MKS TFT24 Dummy by Alejanson
...rse
this is a dummy from the mks tft24.
i uploaded it in different cad formats, so it shoud be compatible with evry cad program.
thingiverse
free
Game Boy Null Case by Alejanson
...ll-kit/
for the normal version, you need 4pcs m3x12mm countersunk screw.
for the extended version 4pcs m3x16mm screws are needed.
thingiverse
free
Replicator Extruder Cabelchain by Alejanson
... cabelchain_v2 (or 9x cablechain_unit_v1)
1x axis_chain_holder_v1
the nema17_spacer is only for the right extruder
thingiverse
free
Ultimate Z Wobble Fix for Duplicator 7 by Alejanson
...nanodlp firmware in my d7
m92 z200
m500
so have fun with the post-build and if you have any questions, i will gladly answer them.
Ohls
design_connected
$16
Nuvola Chair 811-1
...nuvola chair 811-1
designconnected
wilkhahn nuvola chair 811-1 armchairs computer generated 3d model. designed by jutta ohl.
3ddd
$1
MultipleCEO
...полками с кожаными накладками, позволяют моделировать большое количество разнообразных конфигураций, создавая функциональное и, в
thingiverse
free
WimClip III OHL CERN by wimfrombelgium
...ether postcards.
it improves upon a normal paperclip by being double sided.
created by wimfrombelgium
digitized by district three
thingiverse
free
Lulzbot-Prusa Mini Hybrid Mod: bed mount feet by BioLumo
...my prusa mini.
released under the cern 2.0 cern-ohl-w licence
https://ohwr.org/project/cernohl/wikis/documents/cern-ohl-version-2
thingiverse
free
Redstone Rig by cfastie
...hotography from a kite or helium balloon. published under cern ohl. more information is here. some files were updated v/07/2017.
thingiverse
free
Smart phone spectrometer cuvette holder by cfastie
...too. this was originally designed by jeff warren, and the design will continue to change quite a bit. released under cern-ohl-1.1
thingiverse
free
Case for MK111 Shutter Timer by cfastie
...ing on a dual camera rig such as the titan 2 rig. published under cern ohl.
details and full instructions are at the kaptery.
thingiverse
free
Picavet by cfastie
...
published under cern ohl. learn more at the kaptery where you can buy the hardware needed to rig up a picavet cross for flying.
thingiverse
free
Titan 2 Rig by cfastie
...ith a single camera tray from the redstone rig. files updated iii/09/2015. learn more at the kaptery. published under cern ohl.
Heatbed
thingiverse
free
HeatBed by moreken
...heatbed by moreken
thingiverse
heatbed for my printer3d "moredelta"
thingiverse
free
heatbed (double heatbed) holder by Vo_Van_163
... bigger size than work desk. this holder - is good solution for me/ and also this is a good solution for double hotbed regulation
thingiverse
free
Heatbed Spatula by Brabus453
... spatula by brabus453
thingiverse
heatbed spatula
this is a simple spatula to scrape the heatbed from the first layer residues.
thingiverse
free
Heatbed Mount for round Heatbeds by OliverReinecke
...y bottom board to fix the heatbed-mount. but of coursse there are lots of alternatives to do this... its up to you. hope it helps
thingiverse
free
Heatbed plane test
...eds ... this simple object allows to see where the bonding of the object and the flatness of the heatbed might not be optimal ...
thingiverse
free
Heatbed Knob by Sp0nge
...heatbed knob by sp0nge
thingiverse
craftbot plus heatbed knob
print it in abs and put a nut inside.
thingiverse
free
Heatbed cable cover
... the heatbed when i placing the pei sheet.
so i designed this small cover, it clips right down over the +/- screws on the heatbed
thingiverse
free
Heatbed Mosfet controller by oscar_diciomma
...heatbed mosfet controller by oscar_diciomma
thingiverse
heatbed mosfet controller
thingiverse
free
Parametric Heatbed Clamp by verglor
...y verglor
thingiverse
minimalistic heatbed clamps that do not get in way of nozzle.
can be customized for any heatbed thickness.
thingiverse
free
Heatbed support
...ail
heatbed size 328mm
use m5x10 with washers or m5x8 for the 20x20 profile
m4 for heatbed
can be use with wells of 45mm of diam.
Optimal
turbosquid
$3
VolleyBall Optimized
... model volleyball optimized for download as obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1370381)
turbosquid
free
m4a1 optimized
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
PTERODACTYL Optimized CreatureCharacter
...l pterodactyl optimized creaturecharacter for download as fbx on turbosquid: 3d models for games, architecture, videos. (1705900)
turbosquid
$2
XIOLLA: Optimized Character
...free 3d model xiolla: optimized character for download as fbx on turbosquid: 3d models for games, architecture, videos. (1705725)
turbosquid
$8
Melia Azedarach Optimized
...l melia azedarach optimized for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1634816)
turbosquid
$80
Game Optimized Tools
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$13
Subaru B11S Optimized 3D Model
...ubaru b11s optimized 3d model
3dexport
subaru car cars b11s optimized 3onder
subaru b11s optimized 3d model 3onder 10518 3dexport
turbosquid
$15
Tutanhamon 3D - Unity Optimized
... 3d model tutanhamon 3d - unity optimized for download as fbx on turbosquid: 3d models for games, architecture, videos. (1182225)
turbosquid
$39
Rock Scanned "OPTIMIZED"
...
royalty free 3d model rock for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1292372)
turbosquid
$3
The Dead General Optimized Character Rig
...d model the dead general optimized character for download as on turbosquid: 3d models for games, architecture, videos. (1705429)
Level
design_connected
$11
Levels
...levels
designconnected
one nordic levels computer generated 3d model. designed by form us with love.
design_connected
$7
Level
...level
designconnected
zanotta level shelves and storage computer generated 3d model. designed by arik levy.
turbosquid
$29
level
...ty free 3d model level for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1272856)
turbosquid
$1
level
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Mario level
...mario level
3dexport
mario level low quality for fun videos
3ddd
$1
LEVELS OF DISCOVERY
...етская мебель "levels of discovery". rab10003 princess mini rocker
кресло-качалка (мини) "принцесса навсегда"
3d_export
$19
level design
...level design
3dexport
you can use this design (level design) in your own game.
turbosquid
$60
Desert level
...squid
royalty free 3d model desert level for download as fbx on turbosquid: 3d models for games, architecture, videos. (1208131)
turbosquid
$15
Transit Level
...quid
royalty free 3d model transit level for download as max on turbosquid: 3d models for games, architecture, videos. (1158112)
turbosquid
$14
Districts Level
...id
royalty free 3d model districts level for download as max on turbosquid: 3d models for games, architecture, videos. (1408410)
System
archibase_planet
free
System
...m
archibase planet
fire alarm system fire alarm box
security light system - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Spider system
...stem spider glass system
spider system to fix glass stefano galli n050912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Euforia System
...euforia system
3ddd
euforia
euforia system
3d_export
$50
Roof system Truss system 3D Model
...oof system truss system 3d model
3dexport
roof system truss truss stage
roof system truss system 3d model aleksbel 38970 3dexport
3ddd
$1
DVD System
...dvd system
3ddd
dvd , schneider
dvd system
design_connected
free
Seating system
...seating system
designconnected
free 3d model of seating system
3d_export
$5
solar system
...solar system
3dexport
solar system in c4d, with 8k nasa textures
3ddd
$1
Quanta System
...quanta system
3ddd
медицина
quanta system.
лазерное оборудование для медицинских центров
3d_export
$15
solar system
...nd the other the sun, the earth and the moon, the latter has an animation with camera movement included, the files are in spanish
3d_export
$14
missile system
...missile system
3dexport