OPFS (Orignial design by DGUI) [redesign by JaWu] by JaWu

Last crawled date: 3 years, 5 months ago

The OPFS from DGUI is a must have for every PFS shooter and should not be missing in any collection. At least the DGUI has shown the simple means with which you can have fun while sling shooting.
The STL file I created was based on the original dimensions published by DGUI.
Only the fork gap is a little less deep.
The frame is 8mm thick.
To increase the comfort a bit, slots are provided to pass 550 paracord through.
There are two STL's for printing.
without lettering
With the lettering "ÜTT" (greeting used by some German slingshot shooters)
As always, have fun with it and take care of your safety like that of others.