Thingiverse
OpenRC Truggy Natalia
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is my modified version of Original OpenRC Truggy designed by Daniel Noree.
This version is modified so that it can use all metal drive-train bought from cheap source on AliExpress.
At first I tried to print all differential parts by myself but each time something would broke within first minute or two so at the end I gave up and decide to bought metal differential HSP 02024 and other metal parts used for drivetrain. Whole list of bought parts is bellow. I tried to use Pez model but some parts did not fit as it should, and I wanted to reuse some of original parts that I already printed like shock towers etc. so I remodeled both central differential housings and front/rear diff. housing and meany other parts as well. Since I have two big 3S batteries I had to change top plate in order to fit those batteries. For metal axles driveshafts I used 188015 one common on AliExpress.
Shock dumpers are 100mm long but 110mm version can be used as well. Don't get 90mm version.
I use 2900KV motor but that is way too fast on 3S, so I would suggest 2000kv motor or slower if you are using 3S Battery, or better yet, get yourself 2S battery.
For central differential, I have modify HSP 02024 diff in a way that I replace original big metal gear with printed one, so you will need to buy 3 pieces of HSP 02024.
Since I originally bought 10 pieces of bearings of each size (5x10x4, 6x12x4 and 10x15x4) I designed front and rear diff housing so that it use one small bearing (5x10x4) and one big one (10x15x4) for central axle shaft. That way you don't need two additional 5x10x4 but in order to use that you will need Bearing Inserts to insert inside that big bearing.
On front axles driveshafts (188015) first insert "Front axel spacer 1mm" and then insert them to "Pez_Steering_Block". That way driveshaft will stay long enough to enter fully into differential.
Here is full list of bought parts:
10PCS High quality ABEC-5 6700 2RS 6700RS 6700-2RS 6700 RS 10x15X4 mm Miniature double Rubber seal Deep Groove Ball Bearinghttps://www.aliexpress.com/item/32902236492.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
High quality 10PCS ABEC-5 MR126-2RS MR126 2RS MR126 RS MR126RS 6x12x4 mm Blue rubber sealed miniature deep groove ball bearinghttps://www.aliexpress.com/item/32970340984.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
High quality 10PCS ABEC-5 MR105-2RS MR105 2RS MR105 RS MR105RS 5x10x4 mm Blue rubber sealed miniature deep groove ball bearingshttps://www.aliexpress.com/item/32904372039.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
10 Pcs / 5 PCS Stainless Steel Round Rods Axles Bars 3mm x 150mmhttps://www.aliexpress.com/item/32427862310.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
EKIND 10pcs Stainless Steel Round Axles Shaft Rod/Straight Metal Round Shaft Rod Bars for DIY Model Toy RC Car 2mm x 100mmhttps://www.aliexpress.com/item/4000116985200.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
188015 Steel Universal Dogbone Drive Shaft Joint 2P For HSP Redcat Exceed 1/10 RC Model Carhttps://www.aliexpress.com/item/32822022611.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
4pcs RC Tire & Wheel Rim Hex 12MM For RC Himoto 1/10 Off Road Monster Truck Fit HSP Amax Redcat Exceed HPI Racinghttps://www.aliexpress.com/item/32761787735.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
Adjustable Type 100mm Alloy Aluminum Shock oil Absorber For Rc tamiya truck Car 1/10 Damper Buggy Hpi Hsp Traxxas Axial Tamiyahttps://www.aliexpress.com/item/32610331374.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
45ML Rc Shock Absorbers Oil Differential Mechanism Oil For RC Crawler Cars Drifting Car RC Monster Trucks Short-Course Truck (800)https://www.aliexpress.com/item/4000296771085.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
10Pcs 02038 HSP Ball Head Screw For RC 1/10 Model Car Buggy Truck Spare Partshttps://www.aliexpress.com/item/32885389505.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
2pcs Steel Metal RC Car Drive Shaft Dogbone 61mm 63mm 70mm 77mm 84mm 86mm 89.5mm 101mm (86mm or 90mm)https://www.aliexpress.com/item/32764817851.html?spm=a2g0s.9042311.0.0.27424c4dVfusfY
RC HSP 02030 Drive Gear For HSP 1:10 On-Road Car Buggy Truck (2 pieces)https://www.aliexpress.com/item/32824160648.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
2pcs/set RC Toys HSP 1/10 Universal Joint Cup B/Set Screws HSP 02016 Original Parthttps://www.aliexpress.com/item/32824530126.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
HSP 02024 Differential Diff Gear Complete For 1/10 RC Model Car Spare Parts Fit Buggy Monster (3 pieces)https://www.aliexpress.com/item/32729306527.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
5pcs/Lot M3 X 1.5" (38mm) Basher Double Thread End Tight Steel Push Rod Hex CW / CCW For RC Car Airplanehttps://www.aliexpress.com/item/32756525878.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
Waterproof Brushless Senseless Speed Controller 45A 60A 80A 120A 150A ESC and LED Programing Card for 1/8 1/10 1/12 1/20 RC Car (80A)https://www.aliexpress.com/item/33013777460.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
Waterproof 3665 5.0mm 1800KV 2300KV 2900KV 3100KV 3500KV Brushless Motor for 1/10 GTR/Lexus 2S 3S RC Drift Racing Off-road Car (Don't go above 2300kv)https://www.aliexpress.com/item/33014752143.html?spm=a2g0s.9042311.0.0.27424c4dVfusfY
Surpass Hobby KK ESC Series LED Programing Card for RC Car 25/35/45/60A/80A/120A/150A ESC Electronic Speed Controllerhttps://www.aliexpress.com/item/4000252942002.html?spm=a2g0s.9042311.0.0.27424c4dVfusfY
DSSERVO DS3225 25KG 180 Degree Metal Gear High Torque Waterproof Digital Servo For RC Airplane Robot Carhttps://www.banggood.com/DSSERVO-DS3225-25KG-180-Degree-Metal-Gear-High-Torque-Waterproof-Digital-Servo-For-RC-Airplane-Robot-Car-p-1353688.html?rmmds=myorder&cur_warehouse=UK
DumboRC X6 2.4G 6CH Transmitter with X6FG Receiver for JJRC Q65 MN-90 Rc Car Boat Tank Model Parts - Goldhttps://www.banggood.com/DumboRC-X6-2_4G-6CH-Transmitter-with-X6FG-Receiver-for-JJRC-Q65-MN-90-Rc-Car-Boat-Tank-Model-Parts-p-1454329.html?rmmds=myorder&ID=232&cur_warehouse=CN
This version is modified so that it can use all metal drive-train bought from cheap source on AliExpress.
At first I tried to print all differential parts by myself but each time something would broke within first minute or two so at the end I gave up and decide to bought metal differential HSP 02024 and other metal parts used for drivetrain. Whole list of bought parts is bellow. I tried to use Pez model but some parts did not fit as it should, and I wanted to reuse some of original parts that I already printed like shock towers etc. so I remodeled both central differential housings and front/rear diff. housing and meany other parts as well. Since I have two big 3S batteries I had to change top plate in order to fit those batteries. For metal axles driveshafts I used 188015 one common on AliExpress.
Shock dumpers are 100mm long but 110mm version can be used as well. Don't get 90mm version.
I use 2900KV motor but that is way too fast on 3S, so I would suggest 2000kv motor or slower if you are using 3S Battery, or better yet, get yourself 2S battery.
For central differential, I have modify HSP 02024 diff in a way that I replace original big metal gear with printed one, so you will need to buy 3 pieces of HSP 02024.
Since I originally bought 10 pieces of bearings of each size (5x10x4, 6x12x4 and 10x15x4) I designed front and rear diff housing so that it use one small bearing (5x10x4) and one big one (10x15x4) for central axle shaft. That way you don't need two additional 5x10x4 but in order to use that you will need Bearing Inserts to insert inside that big bearing.
On front axles driveshafts (188015) first insert "Front axel spacer 1mm" and then insert them to "Pez_Steering_Block". That way driveshaft will stay long enough to enter fully into differential.
Here is full list of bought parts:
10PCS High quality ABEC-5 6700 2RS 6700RS 6700-2RS 6700 RS 10x15X4 mm Miniature double Rubber seal Deep Groove Ball Bearinghttps://www.aliexpress.com/item/32902236492.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
High quality 10PCS ABEC-5 MR126-2RS MR126 2RS MR126 RS MR126RS 6x12x4 mm Blue rubber sealed miniature deep groove ball bearinghttps://www.aliexpress.com/item/32970340984.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
High quality 10PCS ABEC-5 MR105-2RS MR105 2RS MR105 RS MR105RS 5x10x4 mm Blue rubber sealed miniature deep groove ball bearingshttps://www.aliexpress.com/item/32904372039.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
10 Pcs / 5 PCS Stainless Steel Round Rods Axles Bars 3mm x 150mmhttps://www.aliexpress.com/item/32427862310.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
EKIND 10pcs Stainless Steel Round Axles Shaft Rod/Straight Metal Round Shaft Rod Bars for DIY Model Toy RC Car 2mm x 100mmhttps://www.aliexpress.com/item/4000116985200.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
188015 Steel Universal Dogbone Drive Shaft Joint 2P For HSP Redcat Exceed 1/10 RC Model Carhttps://www.aliexpress.com/item/32822022611.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
4pcs RC Tire & Wheel Rim Hex 12MM For RC Himoto 1/10 Off Road Monster Truck Fit HSP Amax Redcat Exceed HPI Racinghttps://www.aliexpress.com/item/32761787735.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
Adjustable Type 100mm Alloy Aluminum Shock oil Absorber For Rc tamiya truck Car 1/10 Damper Buggy Hpi Hsp Traxxas Axial Tamiyahttps://www.aliexpress.com/item/32610331374.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
45ML Rc Shock Absorbers Oil Differential Mechanism Oil For RC Crawler Cars Drifting Car RC Monster Trucks Short-Course Truck (800)https://www.aliexpress.com/item/4000296771085.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
10Pcs 02038 HSP Ball Head Screw For RC 1/10 Model Car Buggy Truck Spare Partshttps://www.aliexpress.com/item/32885389505.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
2pcs Steel Metal RC Car Drive Shaft Dogbone 61mm 63mm 70mm 77mm 84mm 86mm 89.5mm 101mm (86mm or 90mm)https://www.aliexpress.com/item/32764817851.html?spm=a2g0s.9042311.0.0.27424c4dVfusfY
RC HSP 02030 Drive Gear For HSP 1:10 On-Road Car Buggy Truck (2 pieces)https://www.aliexpress.com/item/32824160648.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
2pcs/set RC Toys HSP 1/10 Universal Joint Cup B/Set Screws HSP 02016 Original Parthttps://www.aliexpress.com/item/32824530126.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
HSP 02024 Differential Diff Gear Complete For 1/10 RC Model Car Spare Parts Fit Buggy Monster (3 pieces)https://www.aliexpress.com/item/32729306527.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
5pcs/Lot M3 X 1.5" (38mm) Basher Double Thread End Tight Steel Push Rod Hex CW / CCW For RC Car Airplanehttps://www.aliexpress.com/item/32756525878.html?spm=a2g0s.9042311.0.0.27424c4dhRGL2M
Waterproof Brushless Senseless Speed Controller 45A 60A 80A 120A 150A ESC and LED Programing Card for 1/8 1/10 1/12 1/20 RC Car (80A)https://www.aliexpress.com/item/33013777460.html?spm=a2g0s.9042311.0.0.27424c4dHTSVCu
Waterproof 3665 5.0mm 1800KV 2300KV 2900KV 3100KV 3500KV Brushless Motor for 1/10 GTR/Lexus 2S 3S RC Drift Racing Off-road Car (Don't go above 2300kv)https://www.aliexpress.com/item/33014752143.html?spm=a2g0s.9042311.0.0.27424c4dVfusfY
Surpass Hobby KK ESC Series LED Programing Card for RC Car 25/35/45/60A/80A/120A/150A ESC Electronic Speed Controllerhttps://www.aliexpress.com/item/4000252942002.html?spm=a2g0s.9042311.0.0.27424c4dVfusfY
DSSERVO DS3225 25KG 180 Degree Metal Gear High Torque Waterproof Digital Servo For RC Airplane Robot Carhttps://www.banggood.com/DSSERVO-DS3225-25KG-180-Degree-Metal-Gear-High-Torque-Waterproof-Digital-Servo-For-RC-Airplane-Robot-Car-p-1353688.html?rmmds=myorder&cur_warehouse=UK
DumboRC X6 2.4G 6CH Transmitter with X6FG Receiver for JJRC Q65 MN-90 Rc Car Boat Tank Model Parts - Goldhttps://www.banggood.com/DumboRC-X6-2_4G-6CH-Transmitter-with-X6FG-Receiver-for-JJRC-Q65-MN-90-Rc-Car-Boat-Tank-Model-Parts-p-1454329.html?rmmds=myorder&ID=232&cur_warehouse=CN
Similar models
thingiverse
free
OpenRC Truggy F/R Diff Remix for HSP 02024 and 6700zz by san2hosh
...e shafts mod) for steering and metal housing and want more clearance for your metal diff (hsp 02024) and 6700zz bearing (10x15x4)
grabcad
free
HSP 02024 Differential Gear 1:10 RC-Cars
...hsp 02024 differential gear 1:10 rc-cars
grabcad
a rough model of a differential for 1:10 rc buggy cars
thingiverse
free
Axle / dogbone extender for the Openrc Truggy (HSP 02024) by TIRO1985
...em/2pcs-steel-metal-rc-car-drive-shaft-dogbone-61mm-63mm-70mm-77mm-84mm-86mm-89-5mm/32764817851.html?spm=a2g0s.9042311.0.0.dcsplv
thingiverse
free
Thrustmaster T3paPRO MOD by BalonekCZ
...-parts-oil-adjustable-130mm-alloy-aluminum-shock-absorber-damper-for-rc-car/32593123945.html?spm=a2g0s.9042311.0.0.q01warspring :
thingiverse
free
Thrustmaster T3PA MOD by BalonekCZ
...i-hop-up-parts-oil-adjustable-130mm-alloy-aluminum-shock-absorber-damper-for-rc-car/32593123945.html?spm=a2g0s.9042311.0.0.q01war
thingiverse
free
KP3S BMG E3DV6 extruder mod by ehitaja_fpv
...af19b7xaof8q
nema17 17hs4023 extruder motor https://www.aliexpress.com/item/32998564515.html?spm=a2g0s.9042311.0.0.27424c4da1ai8m
thingiverse
free
DIY bench power supply (under 20€) by Ikto
...ale female j072 4mm banana plug: https://www.aliexpress.com/item/1005001407318451.html?spm=a2g0s.9042311.0.0.27424c4dhspcfh 2.60€
thingiverse
free
nadav zrihan by nadavz
...0s.9042311.0.0.27424c4dnxx4j8
slip ring - https://www.aliexpress.com/item/4001171413716.html?spm=a2g0s.9042311.0.0.59014c4dmidnoe
thingiverse
free
Open RC Truggy All Metal Diffs
...8.0.0.3a994c4dlwaach
metal front/rear diff:
https://www.aliexpress.com/item/32747540218.html?spm=a2g0s.8937460.0.0.7b102e0exvpwdn
thingiverse
free
Brushless 48mm cover + bracket original = joeynovak by pek
...?spm=a2g0s.9042311.0.0.27424c4dlz1gvb
7-gearhttps://www.aliexpress.com/item/33031516913.html?spm=a2g0s.9042311.0.0.27424c4dsll0v1
Natalia
3ddd
$1
Mama Design Italia /Torino
.../ torino производитель:mamà design страна: италия дизайн :alberto basaglia, natalia rota...
3ddd
$1
Monza, MaMà Design Italia
...design italia страна изготовитель: италия сайт:http://www.mamadesignitalia.com/ дизайнеры: alberto basaglia, natalia rota nodari текстуры в...
3ddd
$1
Natalia Pepe rugs
...epe collection "antalya and bodrum"
collection of carpets in a modern style.
archive 19 carpets (defuse, bamp, opasity)
3ddd
$1
MaMà Design Italia / CAPRI
.../ capri производитель:mamà design страна: италия дизайн :alberto basaglia, natalia rota...
3ddd
free
MaMà Design Italia / AMALFI
.../ amalfi производитель:mamà design страна: италия дизайн :alberto basaglia, natalia rota...
turbosquid
$39
Sideboard concept - Natalia Wieteska
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Recycling Fashion by 10th
...concept/realization: dimitris fotiou, sculptor - art teacheretwinning project collaborators: natalia tzitzi, anita simacschools involved (so far): 10th helioupolis primary...
3d_sky
free
ATMOSPHERA PF.CAP.PA.DV.3
...style, glamour, and quilted by quilt from masters of natalia ?lykovoj...
3d_sky
free
Natalia Pepe rugs
...ection "antalya and bodrum" collection of carpets in a modern style. archive 19 carpets (defuse, bamp, opasity)
3d_sky
free
Mama Design Italia / Torino
...torino manufacturer: mamà design country: italy design: alberto basaglia, natalia rota...
Truggy
thingiverse
free
OpenRC Truggy Shock Tower Edited by tompeth7
...ock tower for the openrc truggy that moves the shock mounting points, to put the shocks at a better angle. edited with 3d builder
thingiverse
free
Spoiler for OpenRC Truggy 1/10 wider+50mm by KENTUS by yolozef
...10 wider+50mm by kentus by yolozef
thingiverse
enjoy !
spoiler for openrc truggy 1/10 by niko
wider by 50mm
scale down to 10%
thingiverse
free
4WD OPENRC, hobbyking diff remix for Niko Truggy by yolozef
...unting holes for open rc by niko model.
suitable for hobbyking m1gear allmetal differential.
in slicer scale down to 10%
enjoy !
thingiverse
free
ZD Racing MT8 Body Post by mstrmold
...for the zd racing pirates 3 mt8 1/8 scale truggy the plastics on this truck are super brittle, and...
thingiverse
free
RC Truggy - Fully 3D printed RC car by 3dimensionschannel
...he parts were printed in an original ender 3, the only modification i made was to put a 0.2mm nozzle to print some smaller parts.
thingiverse
free
Gimbal for DJI Airunit + Fan holder by DonMarle
...lüftung und gimbal designed, um sie in meinem 1/8er truggy oder in einem flieger unter zu bringen. damit sie...
thingiverse
free
OpenRC Truggy Linkage by rudimeyer
...rew hole is 4mm, so there is some tolerance for a m3 screw to move in. use a washer between the screw-head and linkage if needed.
thingiverse
free
Stand Teknorc 1/8 Buggy/Truggy by kalvo12
...rc 1/8 buggy/truggy by kalvo12
thingiverse
this is 1/8 buggy/truggy stand with teknorc logo . include holes for shock in the top
thingiverse
free
RC Buggy Sand & Snow Tires 1:10 & 1:8 by BrooneyMarooney
...brooneymarooney thingiverse das ist ein remix von palmiga`s fantastischen buggy/truggy rädern. https://www.thingiverse.com/thing:970763 für 1:8 buggys nehmt ihr die "brooney"...
thingiverse
free
RC Truggy V2 - Fully 3D printed RC car by 3dimensionschannel
...e parts were printed in an original ender 3, the only modification i made was to put a 0.2mm nozzle to print some smaller parts.
Openrc
thingiverse
free
Steering mount for Tatra OpenRC Trail Truck by benzingtown
...tps://www.ebay.de/itm/orange-blinkende-led-5mm-blinkt-flash-1-5hz-diffus-e6-6/303730671714?hash=item46b7c24062:g:eguaaoswlfjfirta
thingiverse
free
openrc tractor cabin air filter by Merikisseli
...openrc tractor cabin air filter by merikisseli
thingiverse
...
thingiverse
free
OpenRC Tractor Trailer by Merikisseli
...openrc tractor trailer by merikisseli
thingiverse
...
thingiverse
free
OpenRC Truggy Shock Tower Edited by tompeth7
...ock tower for the openrc truggy that moves the shock mounting points, to put the shocks at a better angle. edited with 3d builder
thingiverse
free
Spoiler for OpenRC Truggy 1/10 wider+50mm by KENTUS by yolozef
...10 wider+50mm by kentus by yolozef
thingiverse
enjoy !
spoiler for openrc truggy 1/10 by niko
wider by 50mm
scale down to 10%
thingiverse
free
4WD OPENRC, hobbyking diff remix for Niko Truggy by yolozef
...unting holes for open rc by niko model.
suitable for hobbyking m1gear allmetal differential.
in slicer scale down to 10%
enjoy !
thingiverse
free
Various Jigs - OpenRC Trial Truck by SiScoOpenRC
...nrc trial truck by siscoopenrc
thingiverse
some jigs for drilling holes. i just uploaded my whole folder so some may be useless.
thingiverse
free
OpenRC Trial Truck - Rear Cosmetics by SiScoOpenRC
...'m sure you could make them a lot better.
the main page for the openrc trial truck: https://www.thingiverse.com/thing:3515793
thingiverse
free
Mini OpenRC with 2017 and 2018 upgrades by rose840
... any of this possible.
thanks to jwilliams26 for the 'drift' tyres i have used: https://www.thingiverse.com/thing:3583997
thingiverse
free
Open RC F1 Mini - Rim Remix by rose840
...is a remix of the rim included in the openrc mini. i found that they included wheels did not...