Thingiverse
OpenRC Truggy BBS two part rims by Stipa
by Thingiverse
Last crawled date: 4 years, 5 months ago
Made a remix of original rims to BBS style rims from two parts joined by M2 Button Hex screws, 14pcs per wheel (nuts actually not needed). Screws is just for decoration, rim are held by tire in place. As a bonus rim made to easily fit tire. First I insert "Outer rim" to tire, after that slide in "Inner rim" without a force til it stops and then just step on with foot on "Inner rim" to push it in.
Tire are remixed too, but original Daniels tire fits too. Just had to remix it because I had issue with warping tire spikes while printing, so I added integrated supports into stl. Inserted integrated supports for rim too. To remove integrated supports just place screwdriver on support like shown in photo and hammer it with something a bit heavy. Included stl's without integrated support too.
If you want to edit in CAD, you can do it in OnShape, document are public https://cad.onshape.com/documents/6dc94ef47f5a868c31ad2476/w/8d98e2c0680f898079992e02/e/0771b741a91d6f6769e3da87
Tire are remixed too, but original Daniels tire fits too. Just had to remix it because I had issue with warping tire spikes while printing, so I added integrated supports into stl. Inserted integrated supports for rim too. To remove integrated supports just place screwdriver on support like shown in photo and hammer it with something a bit heavy. Included stl's without integrated support too.
If you want to edit in CAD, you can do it in OnShape, document are public https://cad.onshape.com/documents/6dc94ef47f5a868c31ad2476/w/8d98e2c0680f898079992e02/e/0771b741a91d6f6769e3da87