Thingiverse
OpenRacer quadcopter frame by limonspb
by Thingiverse
Last crawled date: 4 years, 8 months ago
Opensource frame with 3D printed pod for racing and freestyle.
This design is created from scratch and Inspired by the brilliant CampfireQuads frame I been flying for 2 years. Campfire frame is not opensource, plus I wanted some things to be fixed and Caddx Vista pod option. So here you are, OpenRacer frame, files are opensource. Use, fly, enjoy (at your own risk :))
With GoPro mount and gopro7 cases:https://www.thingiverse.com/thing:4595328
Recommended carbon CNC company:https://cncmadness.com/
Recommended 3D printed company:https://www.phx-3d.com/
Frame weight with 3d printed analog pod:
78g no braces
90g with braces
Caddx Vista pod if needed for HD FPV experience:https://www.thingiverse.com/thing:4567374
Top and Bottom plates: 2.5mm carbon
Arms: 5mm carbon
Braces: 4mm carbon
Required screws, nuts, and standoffs described in "Hardware.txt"
The canopy can be printed in stiff TPU.
Nylon will be a little lighter and a little bit stiffer.
Cut, print, fly, enjoy at your own risk.
The author is not responsible for the usage of these files, parts and electronics.
The analog version works with most of normal 20x20 and 30x30 stacks.
Here is what I recommend:
FC: Clracing F7
ESC: Any 30x30 Blheli32 ESC like Spedix, Hobbywing etc. starting from 35A. Be carefull, modern 30x30 Aikon ESCs are too big.
Or STACK instead of FC&ESC
Camera: Runcam Racer 3
or Predator Micro V4
Vtx Rush Tiny Tank
Motors: RCINPOWER GTS-V2 2207PLUS 2207 1860KV
or Vanover Motors or Talon
Props: GEMFAN 51466X3 HURRICANE
Batteries: Rline v3 1300Mah 6S or any good brand like Pyroflip, GNB
U.FL TO SMA EXTENSION
Small antenna like TrueRc
receiver for your radio
optional short race wires like Pyro race wires
zip ties, double side tape, heatshrink, electrical tape, screwdrivers, charger, goggles, radio, soldering iron, scisors, etc :)
This design is created from scratch and Inspired by the brilliant CampfireQuads frame I been flying for 2 years. Campfire frame is not opensource, plus I wanted some things to be fixed and Caddx Vista pod option. So here you are, OpenRacer frame, files are opensource. Use, fly, enjoy (at your own risk :))
With GoPro mount and gopro7 cases:https://www.thingiverse.com/thing:4595328
Recommended carbon CNC company:https://cncmadness.com/
Recommended 3D printed company:https://www.phx-3d.com/
Frame weight with 3d printed analog pod:
78g no braces
90g with braces
Caddx Vista pod if needed for HD FPV experience:https://www.thingiverse.com/thing:4567374
Top and Bottom plates: 2.5mm carbon
Arms: 5mm carbon
Braces: 4mm carbon
Required screws, nuts, and standoffs described in "Hardware.txt"
The canopy can be printed in stiff TPU.
Nylon will be a little lighter and a little bit stiffer.
Cut, print, fly, enjoy at your own risk.
The author is not responsible for the usage of these files, parts and electronics.
The analog version works with most of normal 20x20 and 30x30 stacks.
Here is what I recommend:
FC: Clracing F7
ESC: Any 30x30 Blheli32 ESC like Spedix, Hobbywing etc. starting from 35A. Be carefull, modern 30x30 Aikon ESCs are too big.
Or STACK instead of FC&ESC
Camera: Runcam Racer 3
or Predator Micro V4
Vtx Rush Tiny Tank
Motors: RCINPOWER GTS-V2 2207PLUS 2207 1860KV
or Vanover Motors or Talon
Props: GEMFAN 51466X3 HURRICANE
Batteries: Rline v3 1300Mah 6S or any good brand like Pyroflip, GNB
U.FL TO SMA EXTENSION
Small antenna like TrueRc
receiver for your radio
optional short race wires like Pyro race wires
zip ties, double side tape, heatshrink, electrical tape, screwdrivers, charger, goggles, radio, soldering iron, scisors, etc :)