Thingiverse
Onyx RCR XLR dust boot by theniterat
by Thingiverse
Last crawled date: 4 years, 6 months ago
Bought a used Onyx RCR and the XLR dust boot that came with it (a 3d print) had already snapped.
I redesigned using an XLR cover I created from another project. Also please note that with the current versions the cable snaps in at a 45degree from center. (This was the most optimal for my cable and my not be for yours...I don't know)
I printed both versions on an Ender 3 Pro using Overture TPU. I have not tried printing these in PETG or PLA.
there are 2 versions currently.
XLR Dust Cover Onyx - uses double sided tape to mount. It's a solid fit so make sure you have the positioning set before sticking it to your RCR
CURRENTLY REMOVED - XLR Dust Cover Onyx mag - has a built in slot for a 20x10x2 mm magnet. With a standard .2 layer height I pause the print around layer 115 drop in the magnet and resume the print. I'm currently testing this version on my RCR.
I redesigned using an XLR cover I created from another project. Also please note that with the current versions the cable snaps in at a 45degree from center. (This was the most optimal for my cable and my not be for yours...I don't know)
I printed both versions on an Ender 3 Pro using Overture TPU. I have not tried printing these in PETG or PLA.
there are 2 versions currently.
XLR Dust Cover Onyx - uses double sided tape to mount. It's a solid fit so make sure you have the positioning set before sticking it to your RCR
CURRENTLY REMOVED - XLR Dust Cover Onyx mag - has a built in slot for a 20x10x2 mm magnet. With a standard .2 layer height I pause the print around layer 115 drop in the magnet and resume the print. I'm currently testing this version on my RCR.