Thingiverse
(old v1) ESP32 + BME280 weather station with stevenson screen by mariusbach
by Thingiverse
Last crawled date: 3 years, 1 month ago
Version 2 is available now! https://www.thingiverse.com/thing:4459925
Outdoor Weather Station based on ESP32 and BME 280
Little outdoor weather station with ESP32 (NodeMCU and similars) box which can be mounted to a rail or similar (clamp diameter 22mm).
It has an arm to hold the stevenson screen which inside fits a BME280. Cables can be routed entirely covered and hidden inside the arm!
Glue all pieces together. I used the following sequence for the sensor: bottom - vented - vented with BME holder - vented - top.
This design has proven to be not fully watertight. Rain can get into the ESP32 box and I will need to redesign this one a bit. Please use a better cover.
Also I have the impression that the stevenson screen still lets the sensor heat up in direct sunshine. I might redesign this in the future.
UPDATE March 2019:
The station has now endured a whole cold/rainy season without any defect. It seems the rain protection is working well. On a very few occasions it has hung up and required a reboot, but I don't account this to the housing itself, it's rather some hiccup that also occurs on other same-type indoor boards.
One thing I noticed, as soon as it is in direct sunlight, it reads far too high temperatures. I finally measured the housing temperature with a infrared thermometer, and it does heat up! It seems when there is little wind, the inside warms up quite a bit. I see two options to cope with this: Either place another sensor on the opposite side of the house and only take the lower temperature of the two into account. Or create a version with active airflow (CPU-fan or similar). Unfortunately, I don't have a place outside with all-day shade (living upstairs).
So bottom line, I'll provide an actively "cooled" version within the next weeks! Stay tuned.
UPDATE June 2019:
Ok, the actively cooled version was something I did not make, but instead you'll see a new part in the list: The sun protection. This is scaled in height to match the latitude of Munich, Germany, so that all year around, the sun will be blocked from the stevenson screen. If you live closer to the equator, you might need to add some height (let me know what you need!). The cover is hollow on the circular part, so that you can print it in white PLA (works for me all year round without issues) to avoid black PLA to heat up too much, but then for added light protection, use some Aluminum foil and push it in. Single layer is fine, just cut to the width and rock it in carefully. That way, there's no light shining through the PLA.
You can use the clamp_screw_on.stl for the protection screen as well.
Let me know what you think in the comments. The whole station is then a bit bigger, but protected while still allowing vertical airflow.
Outdoor Weather Station based on ESP32 and BME 280
Little outdoor weather station with ESP32 (NodeMCU and similars) box which can be mounted to a rail or similar (clamp diameter 22mm).
It has an arm to hold the stevenson screen which inside fits a BME280. Cables can be routed entirely covered and hidden inside the arm!
Glue all pieces together. I used the following sequence for the sensor: bottom - vented - vented with BME holder - vented - top.
This design has proven to be not fully watertight. Rain can get into the ESP32 box and I will need to redesign this one a bit. Please use a better cover.
Also I have the impression that the stevenson screen still lets the sensor heat up in direct sunshine. I might redesign this in the future.
UPDATE March 2019:
The station has now endured a whole cold/rainy season without any defect. It seems the rain protection is working well. On a very few occasions it has hung up and required a reboot, but I don't account this to the housing itself, it's rather some hiccup that also occurs on other same-type indoor boards.
One thing I noticed, as soon as it is in direct sunlight, it reads far too high temperatures. I finally measured the housing temperature with a infrared thermometer, and it does heat up! It seems when there is little wind, the inside warms up quite a bit. I see two options to cope with this: Either place another sensor on the opposite side of the house and only take the lower temperature of the two into account. Or create a version with active airflow (CPU-fan or similar). Unfortunately, I don't have a place outside with all-day shade (living upstairs).
So bottom line, I'll provide an actively "cooled" version within the next weeks! Stay tuned.
UPDATE June 2019:
Ok, the actively cooled version was something I did not make, but instead you'll see a new part in the list: The sun protection. This is scaled in height to match the latitude of Munich, Germany, so that all year around, the sun will be blocked from the stevenson screen. If you live closer to the equator, you might need to add some height (let me know what you need!). The cover is hollow on the circular part, so that you can print it in white PLA (works for me all year round without issues) to avoid black PLA to heat up too much, but then for added light protection, use some Aluminum foil and push it in. Single layer is fine, just cut to the width and rock it in carefully. That way, there's no light shining through the PLA.
You can use the clamp_screw_on.stl for the protection screen as well.
Let me know what you think in the comments. The whole station is then a bit bigger, but protected while still allowing vertical airflow.
Similar models
thingiverse
free
Simple weather station (base on BME & ESP32)
...ther station.
list of electronics:
esp32 firebeetle
bme 280 sensor (temperature, humidity & pressure)
classic battery 1050mah
thingiverse
free
Weather Station ESP32 and BME280 by GobRob
...weather station esp32 and bme280 by gobrob
thingiverse
esp32 and bme280 weather station.
thingiverse
free
ESP32 Weather Station (BME280, SPS30)
...station
simple print, no supports required. prints perfect with pla.
update: added fusion360 files for easy further modification.
thingiverse
free
Solar Weather Station by cynicroute
...build on the stevenson shield principle in that there is adequate air circulation to the bme sensor, and still weather resistant.
3dwarehouse
free
Stevenson Screen
...utside #ss #sash #station #stevenson_screen #temperature #thermometer #thermometer_shelter #weather #weather_station #white #wood
thingiverse
free
ESP 32 Weather Station by Dohentai
...nsor
2) light sensor
3) temperature/barometer and humidity sensor
4) solar panel to keep up the 18650 battery (no calcs done yet)
thingiverse
free
Convective Solar Radiation Shield (Stevenson Screen) for weather station by larosta
...air the sensors mounted outside on a pole or similar support. a bill of materials is provided for each...
thingiverse
free
Stevenson screen (misol)
...rature sensor from weather station.
three m4x20 screws are used (has holes for much more).
50mm inner diameter 130mm inner height
thingiverse
free
ESP32 Indoor Weather Station by jjpeet
...rse
i modified the original model to cater for an esp32, and also my bme280 was bigger than the one used in the original design.
grabcad
free
BME280 Case
... humidity sensor from raindrops. just glue the sensor inside the housing and use a little screw to mount it (2x10 mm wood screw).
Mariusbach
thingiverse
free
12V Socket Mount for Handlebar - Motorcycle by mariusbach
...a different socket-to-handlebar-angle (pointing more left or right if you wish, default is 30° off-center). can rework as needed!
thingiverse
free
Car Motorcycle Battery Screw Nut Holder by mariusbach
...if you need different sizes! depth of the slider is 20mm including 2mm flat surface as end-stop (the side where you are pushing).
thingiverse
free
Space Hulk chip holder boxes by Adamow
...chip holders' that i printed and have used for months.https://www.thingiverse.com/mariusbachdesigns you can download three holder boxes with their cover:...
thingiverse
free
USB dust cap by mariusbach
... is a bit thicker there as well (2.3mm), since i had problems with thingiverse's versions which would fall off by themselves.
thingiverse
free
Tube squeeze key by mariusbach
...of a tube, e.g. toothpaste tube.
this design allows to slide the key towards the tube which prevents it from unwinding by itself!
thingiverse
free
Anycubic i3 Mega stepper-fan holder remix by mariusbach
...holder uses the two original mainboard fan screws but places both fans closer to the mainboard (right next to the sd-card cable).
thingiverse
free
ESP32 Box and lid + vented + outdoor version, for BME280 by mariusbach
...d onto the lid) for a better rain protection plus a micro-usb-plug protection. this design is not waterproof, so use at own risk.
thingiverse
free
Filament moving pointer / arrow / gauge by mariusbach
...ament is being pulled in. just press-fit onto the motor shaft.
fits motors with shaft diameter 5mm and flat side of 4.5mm height.
thingiverse
free
Anycubic i3 mega filament spool wheel by mariusbach
...ew images!
wheels for:
anycubic stock spool
janbex spools
geetech spools
3d jake ecopla
sertronics.shop "pla filament"
Bme280
thingiverse
free
D1 Mini Bme280-sensor sphere by LaChriz
...ni
gy-bme280 barometrischer sensor für temperatur, luftfeuchtigkeit und luftdruck
its printed in petg and fits without sticking.
thingiverse
free
BME 280 - desktophousing by Modellaner
...modellaner thingiverse i've created this small housing for a bme280 combo sensor. it is made to put it on...
thingiverse
free
Prusa Mk3 Dry Spool Holder by Kisssys
...santos gives a good introduction to the node red setup.https://randomnerdtutorials.com/esp32-mqtt-publish-bme280arduino/ the fusion 360 file https://a360.co/3jyalco for the ring is...
thingiverse
free
ESP8266 + BME280 enclosure by xshadows
...erse
design a simple enclosure for my esp8266 + bme280 temperature, humidity and pressure sensor with micro usb space for power.
thingiverse
free
Outdoor Enclosure for Plantower PMS5003 / WeMos D1 Mini by artoo
...cut and glued on. the weather station includes a bme280bmp280 in a stevenson screen housing using this model -...
thingiverse
free
Anemometer Remix by davidpoza
...remix of: https://www.thingiverse.com/thing:2559929 also i'm using this case for bme280 sensor: https://www.thingiverse.com/thing:1564828 i've made this remix in order to...
thingiverse
free
Sensor housing for BME280 and CCS811 by TiSpace
...or housing for bme280 and ccs811 used in my co2-indicator project https://sites.google.com/site/tsrprojekt/projekte/co2-indicator
thingiverse
free
modified air quality CO2 sensor box by holoarts
...(1-4) ws2812 led strip sensor(s) - ccs811b air quality, bme280 temperature -- remix modifications -- base: base plate can...
thingiverse
free
Weather Station by ilikecake1
...by ilikecake1 thingiverse this is a housing for a bme280 temperature/humidity/pressure sensor and a raspberry pi zero. the housing...
thingiverse
free
BME280 Mount Housing by hurra
...bme280 mount housing by hurra
thingiverse
remix from https://www.thingiverse.com/thing:2852798
Stevenson
3d_export
$14
stevenson side table
...ters.<br>width: 64,77 cm<br>depth: 52,07 cm<br>height: 62,23 cm<br>scene objects are organized by groups.
turbosquid
$14
Stevenson Side Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Outdoor Enclosure for Plantower PMS5003 / WeMos D1 Mini by artoo
...on. the weather station includes a bme280/bmp280 in a stevenson screen housing using this model -...
thingiverse
free
Sun Screen (Stevenson Screen) by yodatee
...m.stl
31.10.2020 - adjusted base size and merged both base files
06.11.2020 - adjusted size and added a support strut to the base
thingiverse
free
Stevenson screen DC fan ventilated by boanjo
...y clough42 with periodic dc fan ventilation during warm summer days and a sturdy wall/pole mounting.
https://youtu.be/1lt9bhxkx6k
thingiverse
free
Stevenson Screen for Tuya Humidity Temperature and pressure sensor by Bernard_P
...mm
3 écrous nylstop m4
peindre l'ensemble des éléments en blanc pour protéger le pla des rayons uv destructeurs à long terme.
thingiverse
free
Stevenson screen by alessiodo
...contain your sensors.
with 2 body+cap i inserted a dht11 for humidity and temperature, and a bh1750 for brightness.
diameter 60mm
thingiverse
free
Gill Shield Weather Station case for RuuviTag by Nerdaxic
...ruuvitag by nerdaxic thingiverse weather protection with a 3d-printed stevenson screen for ruuvitag temperature/humidity/pressure sensor. keeps the water out...
thingiverse
free
Stevenson Screen by Lexx_666
...in white pla with no supports. the wall mounts probably should be printed in petg.
blenderfile for own modifications is included.
thingiverse
free
solar radiation shield, modular Stevenson Screen; Wetterhäuschen TX 22 Technoline by Lucky2k
...i added a new holder with much more torsion stiffness, since my original design was a little bit unstable against high wind load.
Esp32
thingiverse
free
Esp32 Enclosure by eccnil
...zable box https://www.thingiverse.com/thing:4607690
the esp32 came with pines already soldered so the box is big enough for that
thingiverse
free
DIY Camera Slider by ModernHobbyist
...for my youtube channel. it is made with an esp32 nema 17 stepper motor, a4988 stepper motor driver, extruded...
thingiverse
free
Super Mario Lamp with 32x16 RGB LED animations by astraios3d
...led matrix i am using (2 of them): https://aliexpress.com/item/4000746284302.html esp32 board: https://aliexpress.com/item/32801621054.html flip flop power switch module: https://aliexpress.com/item/33054170454.html encoder...
thingiverse
free
ESP32 DevKit V1 Case (Thick) by bkgoodman
...ference for this case is the pins are completely enclosed in the case, but are open so that you can still connect things to them.
thingiverse
free
Prusa Mk3 Dry Spool Holder by Kisssys
...santos gives a good introduction to the node red setup.https://randomnerdtutorials.com/esp32mqtt-publish-bme280-arduino/ the fusion 360 file https://a360.co/3jyalco for the ring is...
thingiverse
free
Case for ESP32 Cam by garrett85
...n be seen on the photo, where just for programming purposes. power and gnd line must be soldered to the pins of the pcb top side.
thingiverse
free
NodeMCU-ESP32 Case by makyBa
...nodemcu-esp32 case by makyba
thingiverse
this is a case for nodemcu-esp32 (narrow version).
thingiverse
free
OnStep - Smart Hand Controller - SHC - Case - ESP32 Design by rockmover
...tu.be/lwllmuxapzq
i also added an option for a single middle button if people want to print this and use the 5 way center button.
thingiverse
free
DIY PixelStick substitute for light painting by MartinNohr
...memory and speed issues. i redesigned it using an esp32 with a built-in display. i originally used the touch...
thingiverse
free
ESP32 Camera Housing with USB port by Kiltjim
.../thing:419284 , i added a little length, a hole for a usb cord, and a slot to get access to the sd card without opening the case.
Weather
3d_export
$42
Vanguard III Satellite 3D Model
...model 3dexport project vanguard rocket navy satellite optical sensors weather relay transmitter space orbit vanguard iii satellite 3d model...
3d_export
$9
Paver Blocks 11 Set 3D Model
...cobblestone walk path street real seamless tileable tile tilable weatherd stone bump normal specular color map sidewalk pavement paver...
3ddd
$1
RH Maritime Pendant Weather Zinc
...rh maritime pendant weather zinc
3ddd
restoration hardware
maritime pendant weathered zinc
3d_ocean
$2
Hand Painted Tile-able Wooden Roof Shingles
...medieval old painted rough shingles simple tile tile-able washed. weatherd wood worn boost your game production with this simple...
3d_ocean
$9
Cloudy Evening V1
...cloudy evening v1 3docean bad weather blue sky cg cloudy dark environment evening exr gi...
3d_ocean
$7
Old Copper Pot
...dirty kitchen metal metalic old oxidized pot stuff used weatherd general this is a generic 3d model of the...
3d_ocean
$5
Blue Grey Stone Penny Pattern Seamless Texture
...new penny photo real realistic stained town village wall weatherd white blue grey stone penny pattern seamless texture. plain...
3d_export
$39
Sea Container bookcase 3D Model
...bookcase rough sea container loft scratch black seam old weatherd industrial style sea container bookcase 3d model download .c4d...
cg_studio
$15
News Studio 0053d model
...show chair desk table entertainment mate multimedia interior scene weather podium map video textures furniture exhibition stand design advertising...
cg_studio
$15
Weather Vane vol.23d model
...rban
.max .obj .fbx .mb .c4d .3ds - weather vane vol.2 3d model, royalty free license available, instant download after purchase.
V1
3d_ocean
$9
HDRI Morning Sun V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×1932 pixels. it is 32 bit color.
3d_ocean
$15
3d human head v1
...his is a 3d model of male head. the model has polys: 3580 verts: 3635 there are two textures, the first is with painted eyebro...
3d_ocean
$9
Cloudy Sun V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×2322 pixels. it is 32 bit color.
3d_ocean
$9
HDRI Morning SunSet V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4000×1876 pixels. it is 32 bit color.
3d_ocean
$9
Cloudy Evening V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×2322 pixels. it is 32 bit color.
3d_ocean
$15
Apple watch v1
... renders - two *.max files included standart materials and vray-materials - hi-poly model with meshsmooth modifier - not colap...
3d_ocean
$9
HDRI Sunset V2
...panorama sky skydome sun sunset this is a sunset v1 hdr you can use on your projects. format: this...
3d_ocean
$9
Yellow Cloud with Blue V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×2322 pixels. it is 32 bit color.
3d_export
$25
Cybertech V1 Drone 3D Model
...e self combat speeder
cybertech v1 drone 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl iggydesign 112285 3dexport
3d_export
$25
Drone V1 Red Manga 3D Model
...on spaceship starship
drone v1 red manga 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl iggydesign 107045 3dexport
Screen
3d_export
$19
Exhibition booth area 30X15 3DMAX2009 3D Model
...30x15 3dmax2009 3d model 3dexport exhibition stand show demonstration screen advertising business expo stall exhibit display template 3d models...
3d_export
$19
Exhibition booth area 9X6 3DMAX2009 3D Model
...9x6 3dmax2009 3d model 3dexport exhibition stand show demonstration screen advertising business expo stall exhibit display template 3d models...
3d_export
$49
HTC One Gold Edition 3D Model
...droid cell phone mobile cellular tft lcd touchscreen touch screen htc one gold edition 3d model humster3d 91801...
3d_export
$18
LCD Big Screen MAX 2011 3D Model
...tv plasma office games liquid crystal display monitor flat 3d
lcd big screen max 2011 3d model motionmediaworkshop 69991 3dexport
3d_export
$59
Microsoft Surface with Touch Cover 3D Model
...windows wifi tablet computer pc mobile cellular touchscreen touch screen microsoft surface with touch cover 3d model humster3d 72677...
3d_export
$49
BlackBerry Q10 3D Model
...smartphone cell phone mobile cellular tft lcd touchscreen touch screen keyboard 2013 blackberry q10 3d model humster3d 72676...
3d_export
$49
Nokia E6 3D Model
...phone mobile cellular smartphone hsdpa tft lcd touchscreen touch screen nokia e6 3d model humster3d 50044...
3d_export
$49
Samsung Galaxy S2 3D Model
...233 droid cell phone mobile cellular smartphone touchscreen touch screen samsung galaxy s2 3d model humster3d 50735...
3d_export
$49
HTC One V 3D Model
...smartphone cell phone mobile cellular tft lcd touchscreen touch screen htc one v 3d model humster3d 53836...
3d_ocean
$15
Low Poly iPad Pro
...golden icons ios ipad ipad pro mac macintosh osx screen style tablet touch ipad pro with only 86...
Station
3d_export
$150
3d building 856 3D Model
...856 3d model 3dexport city cityscape downtown urban airport station building metropolis street block detailed definition realistic skyscraper huge...
3d_export
$150
3d building 870 3D Model
...870 3d model 3dexport city cityscape downtown urban airport station building metropolis street block detailed definition realistic skyscraper huge...
3d_export
$150
3d building 845 3D Model
...845 3d model 3dexport city cityscape downtown urban airport station building metropolis street block detailed definition realistic skyscraper huge...
3d_export
$300
3d building 909 3D Model
...909 3d model 3dexport city cityscape downtown urban airport station building metropolis street block detailed definition realistic skyscraper huge...
3d_export
$150
3d building 861 3D Model
...861 3d model 3dexport city cityscape downtown urban airport station building metropolis street block detailed definition realistic skyscraper huge...
3d_export
$150
3d building 913 3D Model
...913 3d model 3dexport city cityscape downtown urban airport station building metropolis street block detailed definition realistic skyscraper huge...
3d_export
$19
Space Station 3D Model
...s rayfire max spacecraft lanzadera transbordador espacio galaxia galaxy
space station 3d model imagendigital3d.com 81443 3dexport
3d_export
$99
Cadillac Fleetwood 75 Station Wagon 1959 3D Model
...on avant kombi combi cadillac 50s touring sw 1959 caddy 59
cadillac fleetwood 75 station wagon 1959 3d model squir 64500 3dexport
3d_export
$15
Classic Steam Train 3D Model
...locomotive metal old power rail railroad railway retro smoke station steam steel classic steam train 3d model jronn 65890...
3d_export
$99
Honda Insight Hybrid 2012 3D Model
...2012 2013 2014 hatchback hybrid japan combi kombi sw station wagon eco usa honda insight hybrid 2012 3d model...
Old
3d_export
$99
Jaguar XK150 S Fastback 3D Model
...xk 150 xk150 sport coupe fastback hartin 3d model old british 1957 1958 1960 vehicle jaguar xk150 s fastback...
3d_export
$25
Apartment House 106 Low Poly 3d Model 3D Model
...residential architecture structure low poly 3d exterior model home old windows background house noeclassical apartment house 106 low poly...
3d_export
$25
BMW 502 3D Model
...bmw 502 3d model 3dexport bmw luxury old car auto 502 automobile bmw 502 3d model septimussignus...
3d_export
$10
Old Pallet Low Poly 3D Model
...ly industrial wood old 3d unity udk unreal games engine detailed fbx obg 3ds
old pallet low poly 3d model turcpaul 82429 3dexport
3d_export
$12
Walking Canes 3D Model
...support disabled staff aid balancing trekking poles gentlemen classic old walking canes 3d model firdz3d 73124...
3d_export
$10
Golden barrel inn 3D Model
... 3d model
3dexport
inn medieval goden barrel pub zlatno burence kafana house old
golden barrel inn 3d model buncic 32748 3dexport
3d_export
$10
Dodge Challenger 1970 3D Model
...1970 3d model 3dexport dodge challenger auto model classic old dodge challenger 1970 3d model chernikov 64678...
3d_export
$59
Old workbag 3D Model
... beach travel trip dress clothes wheels people airport plane briefcase old work
old workbag 3d model dzejsi.models 72700 3dexport
3d_export
$89
Old Billiard Table 3D Model
...billiard pool stick ball bar pub game sport play snooker wood tournament
old billiard table 3d model dzejsi.models 73372 3dexport
3d_export
$5
Pokeball Sammys Old Ball 3D Model
...ammys old ball 3d model
3dexport
pokeball pokemon sammy's old ball
pokeball sammys old ball 3d model floydust4 75162 3dexport