Thingiverse
Ohio State 3D Ambigram Tutorial Model
by Thingiverse
Last crawled date: 6 years ago
This is the model that was created by my YouTube tutorial video I posted. If you want to look at it see link below.https://youtu.be/baO1-HSodIs
The model came out a little undersized due to how Fusion 360 treats txt height as a suggestion rather than what it should be. I would scale the .stl by 40% in your slicer for better results. I used water soluble filament for the interface layers between supports as well.
It is a 3d ambigram for fans of the "THE" Ohio State University.
Enjoy!
The model came out a little undersized due to how Fusion 360 treats txt height as a suggestion rather than what it should be. I would scale the .stl by 40% in your slicer for better results. I used water soluble filament for the interface layers between supports as well.
It is a 3d ambigram for fans of the "THE" Ohio State University.
Enjoy!