Thingiverse
Offset Airgun Suppressor 2.0 by Qyuubi786
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a better version of my original offset suppressor.
This suppressor is modular, you can print as many baffles as you need! You will have to increase the housing length by the same amount though. For convenience I have made the baffle 25mm long, so it will be easy to increase length of the housing.
There are 5mm two holes on both the housing and adapter to allow you to screw in a M5 bolt. I will design different diameter adapters in the near future.
Update: I fixed the placement of the 5mm holes on the adapter. Sorry for the obvious error! I've also removed some material in the housing to reduce the amount of filament used and increase overall suppressor volume.
You will need to print 4 baffles and may need shims when you tap the adapter.
Here is a sound comparison of; no silencer, CF silencer and my offset silencer:https://youtu.be/jgdu5NJ3sDk
This suppressor is modular, you can print as many baffles as you need! You will have to increase the housing length by the same amount though. For convenience I have made the baffle 25mm long, so it will be easy to increase length of the housing.
There are 5mm two holes on both the housing and adapter to allow you to screw in a M5 bolt. I will design different diameter adapters in the near future.
Update: I fixed the placement of the 5mm holes on the adapter. Sorry for the obvious error! I've also removed some material in the housing to reduce the amount of filament used and increase overall suppressor volume.
You will need to print 4 baffles and may need shims when you tap the adapter.
Here is a sound comparison of; no silencer, CF silencer and my offset silencer:https://youtu.be/jgdu5NJ3sDk
Similar models
thingiverse
free
Offset Airgun Suppressor by Qyuubi786
...pressor housing thicker for increased rigidity.
remember to sand the sides that stick to the bed as they will stick out a little!
thingiverse
free
Octagonal Airgun Silencer by Qyuubi786
...ot fit on some printers. so i wont make more than a 5 baffle silencer
you will need to tap the adapter using a 1/2" unf tap.
grabcad
free
Suppressor Baffle Stamp Press
...made more sense to make a baffle press to make them. project worked well, and now i can make a set of baffles in a couple hours.
thingiverse
free
Airsoft Mk23 suppressor pack by PH4SIK
... leave the baffles alone, fill the suppressor with any material you like and glue the end cap in place to finish the whole thing.
thingiverse
free
Airgun Suppressor for LCS SK-19 by euler357
...clean up the threads with an m12x1.0mm tap
intended for airgun use only
for more info about my setup:https://cockrum.net/3dp.html
thingiverse
free
Air rifle silencer by simonx
...lued in place. because each section is small you can make quite a long suppressor regardless of the print volume of your printer.
thingiverse
free
Crosman M4-177 Suppressor by kranktone
...4 nozzle), 20% infill.
no supports needed. use a brim.
i just remix'd to make it more smooth using 64 sides within tinkercad.
thingiverse
free
Gel Blaster Customisable Suppressor / Silencer
...signed to conceal hop up and give you the ability to run a suppressor of any length - should fit inside most floating handguards.
thingiverse
free
PP700W 1/2 UNF Insert Silencer Adapter by Qyuubi786
... face of the printed portion. it will help if you epoxy the threaded portion to the printed portion to keep the angle consistent.
thingiverse
free
Adapter for M4 Suppressor V2 by Williee
...m bigger because my printer does 0.3 mm too small holes. i made sure that the suppressor is stright and superglued it to adapter.
Qyuubi786
thingiverse
free
Mobius Mini Mount Lite by Qyuubi786
...c band to hold the camera in the mount. i used theraband gold as this is much better quality than the usual office elastic bands.
thingiverse
free
3 Blade Smooth Tip Prop by Qyuubi786
...hould also fit the 8807hd.
the final print should be sanded then clear coated to reduce drag.
edit: the hex hole needed resizing!
thingiverse
free
PP700W Forends by Qyuubi786
...a table.
it simply slides over the main tube.
i would print with 4 outer layers and 30% infill for rigidity and to save filament.
thingiverse
free
Key Organizer Plain by Qyuubi786
...small adjustments such as a raised key-ring hole to help stop the keys from contacting the key-ring and made it slightly thicker.
thingiverse
free
Adjustable Scope Ring by Qyuubi786
...t at over 90% for rigidity!
edit: i made a small adjustment to the bottom ring mount to allow a tighter fit to the dovetail rail.
thingiverse
free
11mm Dovetail Adjustable Rear Sight by Qyuubi786
...e best to print this in at most 0.2mm nozzle diameter.
...ideally it should be machined out of abs and steel for the sight blade.
thingiverse
free
Xiaomi M365 Dipped Headlight by Qyuubi786
... tape is placed on the angled portion to help deflect the light down to the ground rather than into the eyes of other road users.
thingiverse
free
Octagonal Airgun Silencer by Qyuubi786
...ot fit on some printers. so i wont make more than a 5 baffle silencer
you will need to tap the adapter using a 1/2" unf tap.
thingiverse
free
Scope Cam Adapter by Qyuubi786
...imensions same. i printed the adapter in 30% infill with honeycomb infill.
also the inside of the adapter may need to be sanded.
thingiverse
free
RTI Priest Cheek Rest by Qyuubi786
... chamfered to reduce the discomfort (if there is any) on the cheek.
i recommend printing in abs once the dimensions are adjusted.
Airgun
turbosquid
$1
Airgun Fionda 80
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$60
airgun RAR VL 12
...e 3d model airgun rar vl 12 for download as 3ds, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1420772)
turbosquid
$50
Airgun Haenel Model III-56 Knicker
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$39
Airgun BB pistol
... x 1.34" x 4.98"<br>- model parts: 16<br>- material count: 2<br>- xform: yes<br>- boxtrick: yes
blendswap
free
airgun
...ps compositor cc-by-sa ccbysa cc-by ccby cc-0 cc0 cco creative commons libre open source 3d art
simple airgun enjoy
thingiverse
free
Airgun Cheek Rest
...airgun cheek rest
thingiverse
originally designed for the acz stock but can be used on most airguns with a passing mount.
thingiverse
free
Picatinny mount for FX airguns by PrimalCarnage
...irguns by primalcarnage
thingiverse
a design that is made to fit an fx airguns cyclone, but will most likely fit all fx airguns.
thingiverse
free
3d printed airgun pellets by danielgrotti
...3d printed airgun pellets by danielgrotti
thingiverse
3d printed airgun pellets .22
thingiverse
free
Airgun empty barrel indicator
...se empty barrel indicators it is visible for everyone that no pellet is loaded in your airgun. print in 0.15 for the best results
thingiverse
free
Airgun Holder by jytou
...is is not an easy print as the angle of the holder itself is 45 degrees. i recommend layers as thin as possible (i go for 0.1mm).
Suppressor
turbosquid
$10
Suppressor
...turbosquid
royalty free 3d model suppressor for download as on turbosquid: 3d models for games, architecture, videos. (1218207)
turbosquid
$3
Suppressor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Suppressor Trak
...squid
royalty free 3d model suppressor trak for download as on turbosquid: 3d models for games, architecture, videos. (1395793)
turbosquid
$10
Suppressor Micro
...quid
royalty free 3d model suppressor micro for download as on turbosquid: 3d models for games, architecture, videos. (1380433)
turbosquid
$10
Suppressor Lunar
...quid
royalty free 3d model suppressor lunar for download as on turbosquid: 3d models for games, architecture, videos. (1380407)
turbosquid
$10
Suppressor Hornet
...uid
royalty free 3d model suppressor hornet for download as on turbosquid: 3d models for games, architecture, videos. (1380352)
turbosquid
$4
Pistol Suppressor
...
royalty free 3d model pistol suppressor for download as c4d on turbosquid: 3d models for games, architecture, videos. (1155814)
turbosquid
free
Futuristic Rifle with Suppressor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Sniper with Suppressor, Scope and Laser
...sor, scope and laser for download as blend, dae, stl, and obj on turbosquid: 3d models for games, architecture, videos. (1549030)
turbosquid
$35
Riffle with Suppressor and Red Dot Sight
...iffle with suppressor and red dot sight for download as blend on turbosquid: 3d models for games, architecture, videos. (1548942)
Offset
turbosquid
$20
Armchair Offset
...ee 3d model armchair offset for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1593561)
3ddd
$1
Комод Madia Offset
...комод madia offset
3ddd
oro-milano
комод madia offset. бренд oro-milano
3ddd
$1
Столик Offset (Bonaldo)
...aldo (италия)
артикул: c3596
модель предоставляется в форматах: max(2010), fbx, obj, 3ds, с материалами, текстурами и размерами.
turbosquid
free
Wooden Barrel - Offset
...alty free 3d model wooden barrel - offset for download as fbx on turbosquid: 3d models for games, architecture, videos. (1184305)
turbosquid
$14
Offset Armchair by Menu
...ffset armchair by menu for download as max, 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1681480)
turbosquid
$65
Small Offset Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Offset floor lamp
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Roche Bobois / Offset
...roche bobois / offset
3ddd
стеллаж
линейка мебели offset.roche-bobois.desing sacha lakic.
3d_export
$65
Small Offset Printer 3D Model
...dustrial production equipment tool small offset machine machinery plotter
small offset printer 3d model dropassets 54178 3dexport
turbosquid
$5
MIRROR---Half moon offset
...ror---half moon offset for download as max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1525571)
0
turbosquid
$12
Calligraphic Digit 0 Number 0
...hic digit 0 number 0 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389318)
3d_export
$6
set-0
...set-0
3dexport
turbosquid
$6
hedge 0
...yalty free 3d model hedge 0 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1450353)
turbosquid
$5
Nuber 0
...oyalty free 3d model nuber 0 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1564674)
turbosquid
$22
0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Steam Locomotive Fowler 4F 0-6-0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Liquid Number 0
... model liquid number 0 for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1689919)
turbosquid
$45
Dragon360_perspShape_tmp.0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Rocks Debris 0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$18
wood-guardrail-fence 0
...wood-guardrail-fence 0
3dexport
wood-guardrail-fence 0<br>3ds max 2015
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур