3dExport
Of a hydrofoil board with a rigid wing sail
by 3dExport
Last crawled date: 2 years, 10 months ago
Conceptual design of a hydrofoil sailboard with a rigid wing sail
The project was developed on the basis of a rigid wing sail. Now it can rotate and
tumble to the side. The board itself is equipped with two-tier high-speed hydrofoils,
which allow at low speeds to transfer the board to planing mode, and at
increase in speed - completely lift the board out of the water, thereby reducing
resistance.
The 3D model is made in the form of: hull parts, sail parts, as well as a ballast centerboard and keel.
All peace and goodness.
The project was developed on the basis of a rigid wing sail. Now it can rotate and
tumble to the side. The board itself is equipped with two-tier high-speed hydrofoils,
which allow at low speeds to transfer the board to planing mode, and at
increase in speed - completely lift the board out of the water, thereby reducing
resistance.
The 3D model is made in the form of: hull parts, sail parts, as well as a ballast centerboard and keel.
All peace and goodness.