Thingiverse
Oculus Rift CV1 Sensor Wallmount by Gaets
by Thingiverse
Last crawled date: 4 years, 7 months ago
Hi,
Small but sturdy little wallmount with 59 degrees tilt down...
You need to make fillet with a 1/4 20 tap
and insert the rubber o-ring that came with the sensor and the cable strength relief.
Don't over tighten the sensor...
You can use drywall screws to fix on the wall.
Good Rifting....
Small but sturdy little wallmount with 59 degrees tilt down...
You need to make fillet with a 1/4 20 tap
and insert the rubber o-ring that came with the sensor and the cable strength relief.
Don't over tighten the sensor...
You can use drywall screws to fix on the wall.
Good Rifting....