OctoPrint Raspberry Pi Rig 3.5" PiTFT Touch Display for Lulzbot Mini by SolarMill

Last crawled date: 4 years, 1 month ago

This case was remixed from the Adafruit OctoPrint Raspberry Pi Rig to allow it to be mounted to the side of a Lulzbot Mini 3D Printer. Although the bottom holes of the case line up with preexisting holes on the printer, the top holes will need to be drilled out with a 31 drill bit. The case is secured to the printer using 10mm M3 screws with nylock nuts.
Original case and information:https://learn.adafruit.com/3-dot-5-pitft-octoprint-rig/3d-printed-case
Guide for setup:https://learn.adafruit.com/3-dot-5-pitft-octoprint-rig/overview